[U-Boot] Automated/remote flashing of R-Car3

Wed May 8 12:07:19 UTC 2019

Hello Marek and Eugeniu,

Regarding the H3_M3_StarterKit_Configurator.exe

I am not aware if we have an NDA with Marek. I know you do a lot of work for our products, but I don't know under which conditions. I need to be sure, that the legal prerequisites are met before I can give you the tool.

Regarding the sources of the Bitstream: The sources have not been shared with any of our customers to my knowledge. We have made some special versions (MD pin configurations) on request.

Best regards,

Michael

-----Original Message-----
From: Marek Vasut <marek.vasut at gmail.com>
Sent: Dienstag, 7. Mai 2019 18:09
To: REE erosca at DE.ADIT-JV.COM <erosca at DE.ADIT-JV.COM>
Cc: Marek Vasut <marek.vasut+renesas at gmail.com>; Kieran Bingham <kieran.bingham at ideasonboard.com>; Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>; u-boot at lists.denx.de; linux-renesas-soc at vger.kernel.org; Michael Dege <michael.dege at renesas.com>; Gotthard Voellmeke <gotthard.voellmeke at renesas.com>; Adam Bass <Adam.Bass at renesas.com>; Bastian Farkas <bfarkas at de.adit-jv.com>; Tobias Franzen <tfranzen at de.adit-jv.com>; REE pahmann at de.adit-jv.com <pahmann at de.adit-jv.com>; Simon Maleyka <smaleyka at de.adit-jv.com>; Eugeniu Rosca <roscaeugeniu at gmail.com>
Subject: Re: Automated/remote flashing of R-Car3

On 5/7/19 5:53 PM, Eugeniu Rosca wrote:
> Hi Marek,

Hi,

> Thanks for the swift reply and for the useful references/links.
>
> On Tue, May 07, 2019 at 03:23:12PM +0200, Marek Vasut wrote:
>> On 5/7/19 12:41 PM, Eugeniu Rosca wrote:
>>> Dear Marek, dear Kieran,
>>
>> Hi,
>>
>> [...]
>>
>>> 1.c Use OpenOCD
>>> + Presumably same advantages as using a Lauterbach Based on Kieran's
>>> + https://github.com/kbingham/renesas-jtag
>>>   and on Adam's https://github.com/ntfreak/openocd/commit/1afec4f561392
>>>   the solution is currently in use.
>>> ? Any ideas on the model/price of the JTAG adapter?
>>
>> Any FT2232H (the H is important, due to MPSSE) works.
>> I like Flyswatter2 from TinCanTools.
>>
>>> ? Not tested. Any patches needed on top of vanilla OpenOCD?
>>
>> http://openocd.zylin.com/5149 and related ones, it adds RPC HF support.
>> However, there are two problems with this:
>> 1) Even with buffered write, the programming is slow
>>    - This could be improved by running code on one of the Gen3 CPUs
>>      instead of whacking registers via JTAG adapter. I believe that's
>>      what lauterbach and everyone else does too. The data upload to
>>      SRAM/DRAM is fast via JTAG, register IO is not great.
>> 2) LifeC locks the RPC HF access
>>    - This is a problem, since the JTAG probe cannot access it once
>>      it's locked. There might be a way around it, but it's rather
>>      nasty -- use boundary scan test mode to either flip MD pins or
>>      access the HF bus directly and bitbang at least erase command
>>      to wipe the first few sectors, then reset the CPU and have it
>>      drop to SCIF loader mode, then stop the CPU and reprogram the
>>      HF (since the SCIF loader runs in EL3 and does not touch the
>>      lifec settings.
>>
>> Neither of 1) and 2) is implemented, but can be implemented if there
>> is interest.
>
> 1) looks like a performance issue to me (suboptimal flashing time).
> To be honest, I don't think this is a deal-breaker, assuming that
> erasing/re-writing the whole 64MiB HF doesn't exceed ~10-15min.
> It is also my understanding this is subject of future optimization.

It will have to be optimized further.

> 2) looks like a functional issue (insufficient permission to
> write-access HF). To make things clear, could you please stress if
> http://openocd.zylin.com/5149 already allows updating ATF/U-Boot/OPTEE
> on HF of R-Car Gen3 or is it still awaiting some fixes?

You can read/write/erase the HF with it. Just keep in mind the HF has to be unlocked.

Maybe there is some magic/sectret way to unlock the LifeC RPC access restriction via JTAG, but we don't know about it.

>>> 1.d. Use CPLD Configurator
>>> + H3_M3_StarterKit_Configurator.exe is a Windows tool shipped by
>>>   Renesas, hence readily available, which allows to modify the MD
>>>   pins, to conveniently switch between QSPI/Hyperflash/SCIF
>>>   boot mode from a GUI
>>> + Most of the advantages pointed out above
>>> - ULCB-only solution (i.e. does not apply to Salvator-X)
>>> - Requires a Windows host
>>
>> Where can I obtain this and are there sources / documentation available?
>
> I am able to find below related package freely available:
> https://elinux.org/File:H3_StarterKit_CPLD_Update_20190408.zip
>
> Unfortunately, it doesn't include H3_M3_StarterKit_Configurator.exe.
> The user who uploaded the file is https://elinux.org/User:RenesasJa.
> Are you aware of any messaging/commenting feature on elinux.org?
> If not, I hope Michael (CC-ed) can answer your question. Hopefully he
> sees this message. If not, I can forward your question to him via
> mantis.

It would be also interesting to obtain the CPLD sources and be able to synthesise custom CPLD bitstreams for automated testing.

--
Best regards,
Marek Vasut

Renesas Electronics Europe GmbH,Geschaeftsfuehrer/President : Olav Schulte, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany,Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647