[U-Boot] [PATCH v2 3/5] colibri_vf: use UUID for rootfs

Igor Opaniuk igor.opaniuk at gmail.com
Wed May 29 10:00:41 UTC 2019


From: Igor Opaniuk <igor.opaniuk at toradex.com>

Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
partition. This fixes the issue, when MMC controllers are probed in
a different order in U-boot and Linux kernel.

Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---
 include/configs/colibri_vf.h | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 0d57e303a1..da9a8426ec 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -68,12 +68,19 @@
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0"	\
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
+	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0"	\
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+	"setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
+		"${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"sdbootpart=1\0" \
+	"sddev=0\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
+
 
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
-- 
2.17.1



More information about the U-Boot mailing list