[U-Boot] [PATCH v2 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi

[Andreas Dannenberg]

Only U-Boot specifc DT properties or overrides, must be in -u-boot.dtsi.
Pinctrl nodes does not belong here. Now that pinctrl nodes are in kernel
DT, there is no reason to be keep these in -u-boot.dtsi. Move them to
proper places so that it would ease copying DT entries from kernel DT.

Signed-off-by: Vignesh R <vigneshr at ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/dts/k3-am65-main.dtsi               | 16 ++++++++++++++
 arch/arm/dts/k3-am65-wakeup.dtsi             |  8 +++++++
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 23 --------------------
 3 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index adcd6341e4..f7c2a60d5c 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -69,4 +69,20 @@
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
 	};
+
+	main_pmx0: pinmux at 11c000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c000 0x0 0x2e4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinmux at 11c2e8 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c2e8 0x0 0x24>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
 };
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 1f591ef8bb..1b67747dfe 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -34,6 +34,14 @@
 		};
 	};
 
+	wkup_pmx0: pinmux at 4301c000 {
+		compatible = "pinctrl-single";
+		reg = <0x4301c000 0x118>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
 	wkup_uart0: serial at 42300000 {
 		compatible = "ti,am654-uart";
 		reg = <0x42300000 0x100>;
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index f5c8253831..c802f0b2b7 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -19,22 +19,6 @@
 &cbass_main{
 	u-boot,dm-spl;
 
-	main_pmx0: pinmux at 11c000 {
-		compatible = "pinctrl-single";
-		reg = <0x0 0x11c000 0x0 0x2e4>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
-	main_pmx1: pinmux at 11c2e8 {
-		compatible = "pinctrl-single";
-		reg = <0x0 0x11c2e8 0x0 0x24>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
 	sdhci0: sdhci at 04F80000 {
 		compatible = "arasan,sdhci-5.1";
 		reg = <0x0 0x4F80000 0x0 0x1000>,
@@ -57,13 +41,6 @@
 
 &cbass_mcu {
 	u-boot,dm-spl;
-	wkup_pmx0: pinmux at 4301c000 {
-		compatible = "pinctrl-single";
-		reg = <0x0 0x4301c000 0x0 0x118>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
 
 	navss_mcu: navss-mcu {
 		compatible = "simple-bus";
-- 
2.17.1