[U-Boot] [PATCH] arm: mach-omap2: am33xx: Init pinmux before clock

[Marek Vasut]

The board_early_init_f() inits clock before initing pinmux. However,
the clock configuration code might need to adjust PMIC settings of a
PMIC on I2C bus (e.g. board/ti/am335x/board.c does that). If the I2C
bus pin muxing is not configured before attempting to communicate
with the PMIC, the communication will silently fail and the prcm_init()
may configure fast enough CPU clock that the default voltage provided
by the PMIC would be insufficient and the platform would become
unstable.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Jean-Jacques Hiblot <jjhiblot at ti.com>
Cc: Tom Rini <trini at konsulko.com>
---
 arch/arm/mach-omap2/am33xx/board.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 5507348981..03460c3eb7 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -375,8 +375,8 @@ void update_rtc_magic(void)
  */
 int board_early_init_f(void)
 {
-	prcm_init();
 	set_mux_conf_regs();
+	prcm_init();
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
 	update_rtc_magic();
 #endif
-- 
2.20.1