[U-Boot] [v4, 2/5] mmc: split fsl_esdhc driver for i.MX
Y.b. Lu
yangbo.lu at nxp.com
Wed May 29 12:19:02 UTC 2019
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX
initially. The later QoriQ series PowerPC processors (which were
evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and
i.MX series processors were using this driver for their eSDHCs too.
For the two series processors, the eSDHCs are becoming more and
more different. We should have split it into two drivers, like them
(sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel.
This patch is just to create a fsl_esdhc_imx driver which is a copy
of fsl_esdhc driver for i.MX processors. We will convert i.MX processors
to use fsl_esdhc_imx, and clean up the two drivers separately in the
future patches.
Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
Changes for v2:
- None.
Changes for v3:
- None.
Changes for v4:
- Used "Enhanced Secure Digital Host" in Kconfig help.
- Moved copyright to top line and added my info.
- Added Tested-by/Reviewed-by.
---
drivers/mmc/Kconfig | 10 ++++++++--
drivers/mmc/Makefile | 1 +
drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} | 7 +++++--
include/{fsl_esdhc.h => fsl_esdhc_imx.h} | 13 ++++++++-----
4 files changed, 22 insertions(+), 9 deletions(-)
copy drivers/mmc/{fsl_esdhc.c => fsl_esdhc_imx.c} (99%)
copy include/{fsl_esdhc.h => fsl_esdhc_imx.h} (97%)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c23299ea96..93588725f2 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -668,8 +668,14 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
config FSL_ESDHC
bool "Freescale/NXP eSDHC controller support"
help
- This selects support for the eSDHC (enhanced secure digital host
- controller) found on numerous Freescale/NXP SoCs.
+ This selects support for the eSDHC (Enhanced Secure Digital Host
+ Controller) found on numerous Freescale/NXP SoCs.
+
+config FSL_ESDHC_IMX
+ bool "Freescale/NXP i.MX eSDHC controller support"
+ help
+ This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
+ Controller) found on numerous Freescale/NXP SoCs.
endmenu
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 0076fc393b..3c8c53a9e1 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_MMC_DW_ROCKCHIP) += rockchip_dw_mmc.o
obj-$(CONFIG_MMC_DW_SOCFPGA) += socfpga_dw_mmc.o
obj-$(CONFIG_MMC_DW_SNPS) += snps_dw_mmc.o
obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
+obj-$(CONFIG_FSL_ESDHC_IMX) += fsl_esdhc_imx.o
obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o
obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
obj-$(CONFIG_MMC_MESON_GX) += meson_gx_mmc.o
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc_imx.c
similarity index 99%
copy from drivers/mmc/fsl_esdhc.c
copy to drivers/mmc/fsl_esdhc_imx.c
index 672691fa6a..1474e2cee9 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -1,5 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
+ * Copyright 2019 NXP
+ * Yangbo Lu <yangbo.lu at nxp.com>
+ *
* Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
* Andy Fleming
*
@@ -18,7 +21,7 @@
#include <part.h>
#include <power/regulator.h>
#include <malloc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
#include <fdt_support.h>
#include <asm/io.h>
#include <dm.h>
@@ -110,7 +113,7 @@ struct esdhc_soc_data {
* @non_removable: 0: removable; 1: non-removable
* @wp_enable: 1: enable checking wp; 0: no check
* @vs18_enable: 1: use 1.8V voltage; 0: use 3.3V
- * @flags: ESDHC_FLAG_xx in include/fsl_esdhc.h
+ * @flags: ESDHC_FLAG_xx in include/fsl_esdhc_imx.h
* @caps: controller capabilities
* @tuning_step: tuning step setting in tuning_ctrl register
* @start_tuning_tap: the start point for tuning in tuning_ctrl register
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc_imx.h
similarity index 97%
copy from include/fsl_esdhc.h
copy to include/fsl_esdhc_imx.h
index 8dbd5249a7..67fd28926e 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc_imx.h
@@ -3,11 +3,14 @@
* FSL SD/MMC Defines
*-------------------------------------------------------------------
*
+ * Copyright 2019 NXP
+ * Yangbo Lu <yangbo.lu at nxp.com>
+ *
* Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc
*/
-#ifndef __FSL_ESDHC_H__
-#define __FSL_ESDHC_H__
+#ifndef __FSL_ESDHC_IMX_H__
+#define __FSL_ESDHC_IMX_H__
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -258,15 +261,15 @@ struct fsl_esdhc_cfg {
#error "Endianess is not defined: please fix to continue"
#endif
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
int fsl_esdhc_mmc_init(bd_t *bis);
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg);
void fdt_fixup_esdhc(void *blob, bd_t *bd);
#else
static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; }
static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {}
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
void __noreturn mmc_boot(void);
void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
-#endif /* __FSL_ESDHC_H__ */
+#endif /* __FSL_ESDHC_IMX_H__ */
--
2.17.1
More information about the U-Boot
mailing list