[U-Boot] [PATCH v4 06/15] arm: dts: k3: Add phy specific properties to SD card node

Faiz Abbas faiz_abbas at ti.com
Thu May 23 17:37:43 UTC 2019


With changes in the driver requiring phy related properties,
add the same for the SD card node to prevent breaking boot with
the driver update.

Signed-off-by: Faiz Abbas <faiz4000 at gmail.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +++
 arch/arm/dts/k3-am654-r5-base-board.dts      | 1 +
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 589a90f9f9..c43888f36d 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -34,6 +34,8 @@
 		clocks = <&k3_clks 48 1>;
 		power-domains = <&k3_pds 48>;
 		max-frequency = <25000000>;
+		ti,otap-del-sel = <0x2>;
+		ti,trm-icp = <0x8>;
 	};
 
 };
@@ -190,4 +192,5 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	sdhci-caps-mask = <0x7 0x0>;
+	ti,driver-strength-ohm = <50>;
 };
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 56eae4f971..7114df3d79 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -184,4 +184,5 @@
 	clock-names = "clk_xin";
 	clocks = <&clk_200mhz>;
 	/delete-property/ power-domains;
+	ti,driver-strength-ohm = <50>;
 };
-- 
2.17.1



More information about the U-Boot mailing list