[U-Boot] [PATCH] davinci: spl: Create board_init_f for explicit initialization

[Adam Ford]

On Tue, May 21, 2019 at 7:52 AM Sekhar Nori <nsekhar at ti.com> wrote:
>
> On 21/05/19 1:05 AM, Adam Ford wrote:
> > The arch_cpu_init() and preloader_console_init() functions
> > were not getting called until board_init_r() as part of the
> > spl_board_init() functions.  This patch explicitly moves these
> > initialization sequences earlier in startup, and now clears BSS
> > per the suggested workflow in the README. This also means that
> > CONFIG_SPL_BOARD_INIT can be removed from the defconfig
> >
> > Suggested-by: Sekhar Nori <nsekhar at ti.com>
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > diff --git a/arch/arm/mach-davinci/spl.c b/arch/arm/mach-davinci/spl.c
> > index 103639e347..05c78f1801 100644
> > --- a/arch/arm/mach-davinci/spl.c
> > +++ b/arch/arm/mach-davinci/spl.c
> > @@ -37,6 +37,33 @@ void spl_board_init(void)
> >       preloader_console_init();
> >  }
> >
> > +void board_init_f(ulong boot_flags)
> > +{
> > +     gd->flags = boot_flags;
> > +     gd->have_console = 0;
> > +
> > +     if (!(gd->flags & GD_FLG_SPL_INIT)) {
> > +             if (spl_init())
> > +                     hang();
> > +     }
> > +
> > +     arch_cpu_init();
> > +
> > +     board_early_init_f();
> > +
> > +     /* setup GP timer */
> > +     timer_init();
> > +
> > +     /* UART clocks enabled and gd valid - init serial console */
> > +     preloader_console_init();
> > +
> > +     /* Clear the BSS. */
> > +     memset(__bss_start, 0, __bss_end - __bss_start);
> > +
> > +     /* load/boot image from boot device */
> > +     board_init_r(NULL, 0);
> > +}
>
> This seems incorrect. board_init_r() is already called by
> arch/arm/lib/crt0.S. A much simple fix should do. I was able to get back
> to working on this today. Will send a patch soon.

I used the board_init_f functions I found for a bunch of various other
boards as the basis and they do this, but I confirmed that removing
the board_init_r() call from here appears to work correctly.
However, I'll test your patch when it's available.

adam
>
> Thanks,
> Sekhar