[U-Boot] [PATCH v2] board/BuR/brsmarc1: initial commit
Felix Brack
fb at ltec.ch
Thu May 2 12:46:28 UTC 2019
Hi Hannes,
On 02.05.19 14:09, Hannes Schmelzer wrote:
> This commit adds support for the B&R brsmarc1 SoM.
>
> The SoM is based on TI's AM335x SoC.
> Mainly vxWorks 6.9.4.x is running on the board,
> doing some PLC stuff on various carrier boards.
>
> Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
>
> ---
>
> Changes in v2:
> - fix style issue in arch/arm/mach-omap2/am33xx/Kconfig
> - fix SDPX tag in Make-files/rules
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/am335x-brsmarc1.dts | 408 +++++++++++++++++++++++++++++++++++++
> arch/arm/mach-omap2/Kconfig | 1 +
> arch/arm/mach-omap2/am33xx/Kconfig | 4 +
> board/BuR/brsmarc1/Kconfig | 15 ++
> board/BuR/brsmarc1/MAINTAINERS | 6 +
> board/BuR/brsmarc1/Makefile | 10 +
> board/BuR/brsmarc1/board.c | 168 +++++++++++++++
> board/BuR/brsmarc1/config.mk | 33 +++
> board/BuR/brsmarc1/mux.c | 266 ++++++++++++++++++++++++
> configs/brsmarc1_defconfig | 107 ++++++++++
> include/configs/brsmarc1.h | 87 ++++++++
> 12 files changed, 1106 insertions(+)
> create mode 100644 arch/arm/dts/am335x-brsmarc1.dts
> create mode 100644 board/BuR/brsmarc1/Kconfig
> create mode 100644 board/BuR/brsmarc1/MAINTAINERS
> create mode 100644 board/BuR/brsmarc1/Makefile
> create mode 100644 board/BuR/brsmarc1/board.c
> create mode 100644 board/BuR/brsmarc1/config.mk
> create mode 100644 board/BuR/brsmarc1/mux.c
> create mode 100644 configs/brsmarc1_defconfig
> create mode 100644 include/configs/brsmarc1.h
>
> diff --git a/board/BuR/brsmarc1/mux.c b/board/BuR/brsmarc1/mux.c
> new file mode 100644
> index 0000000..33c214d
> --- /dev/null
> +++ b/board/BuR/brsmarc1/mux.c
> @@ -0,0 +1,266 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * mux.c
> + *
> + * Pinmux Setting for B&R BRSMARC1 Board (HW-Rev. 1)
> + *
> + * Copyright (C) 2017 Hannes Schmelzer <hannes.schmelzer at br-automation.com>
> + * B&R Industrial Automation GmbH - http://www.br-automation.com
> + *
> + */
> +
> +#include <common.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch/hardware.h>
> +#include <asm/arch/mux.h>
> +#include <asm/io.h>
> +#include <i2c.h>
> +
Is there any particular reason for not using the existing pinctrl driver
to do all this pin configuration?
> +static struct module_pin_mux spi0_pin_mux[] = {
> + /* SPI0_SCLK */
> + {OFFSET(spi0_sclk), MODE(0) | PULLUDEN | RXACTIVE},
> + /* SPI0_D0 */
> + {OFFSET(spi0_d0), MODE(0) | PULLUDEN | RXACTIVE},
> + /* SPI0_D1 */
> + {OFFSET(spi0_d1), MODE(0) | PULLUDEN | RXACTIVE},
> + /* SPI0_CS0 */
> + {OFFSET(spi0_cs0), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
> + /* SPI0_CS1 */
> + {OFFSET(spi0_cs1), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
> + {-1},
> +};
> +
> +static struct module_pin_mux spi1_pin_mux[] = {
> + /* SPI1_SCLK */
> + {OFFSET(mcasp0_aclkx), MODE(3) | PULLUDEN | RXACTIVE},
> + /* SPI1_D0 */
> + {OFFSET(mcasp0_fsx), MODE(3) | PULLUDEN | RXACTIVE},
> + /* SPI1_D1 */
> + {OFFSET(mcasp0_axr0), MODE(3) | PULLUDEN | RXACTIVE},
> + /* SPI1_CS0 */
> + {OFFSET(mcasp0_ahclkr), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
> + /* SPI1_CS1 */
> + {OFFSET(xdma_event_intr0), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
> + {-1},
> +};
> +
> +static struct module_pin_mux dcan0_pin_mux[] = {
> + /* DCAN0 TX */
> + {OFFSET(uart1_ctsn), MODE(2) | PULLUDEN | PULLUP_EN},
> + /* DCAN0 RX */
> + {OFFSET(uart1_rtsn), MODE(2) | RXACTIVE},
> + {-1},
> +};
> +
> +static struct module_pin_mux dcan1_pin_mux[] = {
> + /* DCAN1 TX */
> + {OFFSET(uart0_ctsn), MODE(2) | PULLUDEN | PULLUP_EN},
> + /* DCAN1 RX */
> + {OFFSET(uart0_rtsn), MODE(2) | RXACTIVE},
> + {-1},
> +};
> +
> +static struct module_pin_mux gpios[] = {
> + /* GPIO0_7 - LVDS_EN */
> + {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
> + /* GPIO0_20 - BKLT_PWM (timer7) */
> + {OFFSET(xdma_event_intr1), (MODE(4) | PULLUDDIS | PULLDOWN_EN)},
> + /* GPIO2_4 - DISON */
> + {OFFSET(gpmc_wen), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
> + /* GPIO1_24 - RGB_EN */
> + {OFFSET(gpmc_a8), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
> + /* GPIO1_28 - nPD */
> + {OFFSET(gpmc_be1n), (MODE(7) | PULLUDEN | PULLUP_EN)},
> + /* GPIO2_5 - Watchdog */
> + {OFFSET(gpmc_be0n_cle), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
> + /* GPIO2_0 - ResetOut */
> + {OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN | PULLUP_EN)},
> + /* GPIO2_2 - BKLT_EN */
> + {OFFSET(gpmc_advn_ale), (MODE(7) | PULLUDDIS | PULLDOWN_EN)},
> + /* GPIO1_17 - GPIO0 */
> + {OFFSET(gpmc_a1), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO1_18 - GPIO1 */
> + {OFFSET(gpmc_a2), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO1_19 - GPIO2 */
> + {OFFSET(gpmc_a3), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO1_22 - GPIO3 */
> + {OFFSET(gpmc_a6), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO1_23 - GPIO4 */
> + {OFFSET(gpmc_a7), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO1_25 - GPIO5 */
> + {OFFSET(gpmc_a9), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO3_7 - GPIO6 */
> + {OFFSET(emu0), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO3_8 - GPIO7 */
> + {OFFSET(emu1), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO3_18 - GPIO8 */
> + {OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO3_19 - GPIO9 */
> + {OFFSET(mcasp0_fsr), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO3_20 - GPIO10 */
> + {OFFSET(mcasp0_axr1), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO3_21 - GPIO11 */
> + {OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUDDIS | RXACTIVE)},
> + /* GPIO2_28 - DRAM-strapping */
> + {OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | PULLUP_EN)},
> + /* GPIO2_4 - not routed (Pin U6) */
> + {OFFSET(gpmc_wen), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* GPIO2_5 - not routed (Pin T6) */
> + {OFFSET(gpmc_be0n_cle), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* GPIO2_28 - not routed (Pin G15) */
> + {OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* GPIO3_18 - not routed (Pin B12) */
> + {OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + {-1},
> +};
> +
> +static struct module_pin_mux uart0_pin_mux[] = {
> + /* UART0_RXD */
> + {OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* UART0_TXD */
> + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
> + {-1},
> +};
> +
> +static struct module_pin_mux uart234_pin_mux[] = {
> + /* UART2_RXD */
> + {OFFSET(mii1_txclk), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* UART2_TXD */
> + {OFFSET(mii1_rxclk), (MODE(1) | PULLUDEN)},
> +
> + /* UART3_RXD */
> + {OFFSET(mii1_rxd3), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* UART3_TXD */
> + {OFFSET(mmc0_dat0), (MODE(3) | PULLUDEN)},
> + /* UART3_RTS */
> + {OFFSET(mmc0_cmd), (MODE(2) | PULLUDEN)},
> + /* UART3_CTS */
> + {OFFSET(mmc0_clk), (MODE(2) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> +
> + /* UART4_RXD */
> + {OFFSET(mii1_txd3), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> + /* UART4_TXD */
> + {OFFSET(mii1_txd2), (MODE(3) | PULLUDEN)},
> + /* UART4_RTS */
> + {OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN)},
> + /* UART4_CTS */
> + {OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE)},
> +
> + {-1},
> +};
> +
> +static struct module_pin_mux i2c_pin_mux[] = {
> + /* I2C0_DATA */
> + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
> + /* I2C0_SCLK */
> + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
> + /* I2C1_DATA */
> + {OFFSET(uart1_rxd), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)},
> + /* I2C1_SCLK */
> + {OFFSET(uart1_txd), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)},
> + {-1},
> +};
> +
> +static struct module_pin_mux eth_pin_mux[] = {
> + /* ETH1 */
> + {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* ETH1_REFCLK */
> + {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRSDV */
> + {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXER */
> + {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
> + {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
> + {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
> + {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
> + {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
> +
> + /* ETH2 */
> + {OFFSET(mii1_col), MODE(1) | RXACTIVE}, /* ETH2_REFCLK */
> + {OFFSET(gpmc_wait0), MODE(3) | RXACTIVE}, /* RMII2_CRSDV */
> + {OFFSET(gpmc_wpn), MODE(3) | RXACTIVE}, /* RMII2_RXER */
> + {OFFSET(gpmc_a0), MODE(3)}, /* RMII2_TXEN */
> + {OFFSET(gpmc_a11), MODE(3) | RXACTIVE}, /* RMII2_RXD0 */
> + {OFFSET(gpmc_a10), MODE(3) | RXACTIVE}, /* RMII2_RXD1 */
> + {OFFSET(gpmc_a5), MODE(3)}, /* RMII2_TXD0 */
> + {OFFSET(gpmc_a4), MODE(3)}, /* RMII2_TXD1 */
> +
> + /* gpio2_19, gpio 3_4, not connected on board */
> + {OFFSET(mii1_rxd2), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
> + {OFFSET(mii1_rxdv), MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE},
> +
> + /* ETH Management */
> + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
> + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
> +
> + {-1},
> +};
> +
> +static struct module_pin_mux mmc1_pin_mux[] = {
> + {OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */
> + {OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT6 */
> + {OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT5 */
> + {OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT4 */
> + {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */
> + {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */
> + {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */
> + {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */
> + {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */
> + {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */
> + {-1},
> +};
> +
> +static struct module_pin_mux lcd_pin_mux[] = {
> + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD-Data(0) */
> + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD-Data(1) */
> + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD-Data(2) */
> + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD-Data(3) */
> + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD-Data(4) */
> + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD-Data(5) */
> + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD-Data(6) */
> + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD-Data(7) */
> + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD-Data(8) */
> + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD-Data(9) */
> + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD-Data(10) */
> + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD-Data(11) */
> + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD-Data(12) */
> + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD-Data(13) */
> + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD-Data(14) */
> + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD-Data(15) */
> +
> + {OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)}, /* LCD-Data(16) */
> + {OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)}, /* LCD-Data(17) */
> + {OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)}, /* LCD-Data(18) */
> + {OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)}, /* LCD-Data(19) */
> + {OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)}, /* LCD-Data(20) */
> + {OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)}, /* LCD-Data(21) */
> + {OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)}, /* LCD-Data(22) */
> + {OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)}, /* LCD-Data(23) */
> +
> + {OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)}, /* LCD-VSync */
> + {OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)}, /* LCD-HSync */
> + {OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
> + {OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)}, /* LCD-CLK */
> +
> + {-1},
> +};
> +
> +void enable_uart0_pin_mux(void)
> +{
> + configure_module_pin_mux(uart0_pin_mux);
> +}
> +
> +void enable_i2c_pin_mux(void)
> +{
> + configure_module_pin_mux(i2c_pin_mux);
> +}
> +
> +void enable_board_pin_mux(void)
> +{
> + configure_module_pin_mux(eth_pin_mux);
> + configure_module_pin_mux(spi0_pin_mux);
> + configure_module_pin_mux(spi1_pin_mux);
> + configure_module_pin_mux(dcan0_pin_mux);
> + configure_module_pin_mux(dcan1_pin_mux);
> + configure_module_pin_mux(uart234_pin_mux);
> + configure_module_pin_mux(mmc1_pin_mux);
> + configure_module_pin_mux(lcd_pin_mux);
> + configure_module_pin_mux(gpios);
> +}
regards Felix
More information about the U-Boot
mailing list