[U-Boot] [RESEND PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1

[Jagan Teki]

sdmmc cd pin is configured as RK_FUNC_GPIO which is wrong and
indeed failed to detect the sdcard on the board with below error

  Card did not respond to voltage select!

So, fix it by replacing RK_FUNC_GPIO with RK_FUNC_1 which
is already defined in rk3399.dts so make use of same like
other boards.

Add these changes in -u-boot.dtsi to make Linux sync easy for future
changes.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
 arch/arm/dts/rk3399-nanopi4-u-boot.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopi4-u-boot.dtsi

diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
new file mode 100644
index 0000000000..20db99c0b8
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan at amarulasolutions.com>
+ */
+
+&sdmmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_cd>;
+};
-- 
2.18.0.321.gffc6fa0e3