[U-Boot] [PATCH v2 3/3] mach-meson: g12a: add DWC2 peripheral mode support
Lukasz Majewski
lukma at denx.de
Mon May 6 21:16:00 UTC 2019
Hi Neil,
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA512
>
> Hi Lukasw,
>
> Le 19/04/2019 08:17, Lukasz Majewski a écrit :
> > Hi Neil,
> >
> >> Adds support for Amlogic G12A USB Device mode.
> >>
> >> The DWC2 Controller behind the Glue can be connected to an OTG
> >> capable PHY. The Glue setups the PHY mode.
> >>
> >> This patch implements Device mode support by adding a
> >> board_usb_init/cleanup setting up the DWC2 controller and switch
> >> the OTG capable port to Device before starting the DWC2 controller
> >> in Device mode.
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> >
> > I wanted to apply this series, but it turned out that it depends on:
> > [U-Boot] [PATCH v2 0/6] ARM: meson: Add support for G12A based U200
> > board
> >
> > Let's wait till the above one is pulled to master.
>
> Do you want me to resend the serie rebased on master ?
Yes, please. That would speed up the process considerably.
Thanks in advance for help.
>
> Neil
>
> >
> >> ---
> >> arch/arm/include/asm/arch-meson/usb.h | 12 +++
> >> arch/arm/mach-meson/board-g12a.c | 126
> >> ++++++++++++++++++++++++++ 2 files changed, 138 insertions(+)
> >> create mode 100644 arch/arm/include/asm/arch-meson/usb.h
> >>
> >> diff --git a/arch/arm/include/asm/arch-meson/usb.h
> >> b/arch/arm/include/asm/arch-meson/usb.h new file mode 100644
> >> index 0000000000..b794b5ce77
> >> --- /dev/null
> >> +++ b/arch/arm/include/asm/arch-meson/usb.h
> >> @@ -0,0 +1,12 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright (C) 2019 BayLibre, SAS
> >> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> >> + */
> >> +
> >> +#ifndef __MESON_USB_H__
> >> +#define __MESON_USB_H__
> >> +
> >> +int dwc3_meson_g12a_force_mode(struct udevice *dev, enum
> >> usb_dr_mode mode); +
> >> +#endif /* __MESON_USB_H__ */
> >> diff --git a/arch/arm/mach-meson/board-g12a.c
> >> b/arch/arm/mach-meson/board-g12a.c index fc3764b960..1652970fbd
> >> 100644 --- a/arch/arm/mach-meson/board-g12a.c
> >> +++ b/arch/arm/mach-meson/board-g12a.c
> >> @@ -12,7 +12,12 @@
> >> #include <asm/io.h>
> >> #include <asm/armv8/mmu.h>
> >> #include <linux/sizes.h>
> >> +#include <usb.h>
> >> +#include <linux/usb/otg.h>
> >> +#include <asm/arch/usb.h>
> >> +#include <usb/dwc2_udc.h>
> >> #include <phy.h>
> >> +#include <clk.h>
> >>
> >> DECLARE_GLOBAL_DATA_PTR;
> >>
> >> @@ -148,3 +153,124 @@ void meson_eth_init(phy_interface_t mode,
> >> unsigned int flags) /* Enable power gate */
> >> clrbits_le32(G12A_MEM_PD_REG_0,
> >> G12A_MEM_PD_REG_0_ETH_MASK); }
> >> +
> >> +#if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
> >> + CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
> >> +static struct dwc2_plat_otg_data meson_g12a_dwc2_data;
> >> +
> >> +int board_usb_init(int index, enum usb_init_type init)
> >> +{
> >> + struct fdtdec_phandle_args args;
> >> + const void *blob = gd->fdt_blob;
> >> + int node, dwc2_node;
> >> + struct udevice *dev, *clk_dev;
> >> + struct clk clk;
> >> + int ret;
> >> +
> >> + /* find the usb glue node */
> >> + node = fdt_node_offset_by_compatible(blob, -1,
> >> +
> >> "amlogic,meson-g12a-usb-ctrl");
> >> + if (node < 0) {
> >> + debug("Not found usb-control node\n");
> >> + return -ENODEV;
> >> + }
> >> +
> >> + if (!fdtdec_get_is_enabled(blob, node)) {
> >> + debug("usb is disabled in the device tree\n");
> >> + return -ENODEV;
> >> + }
> >> +
> >> + ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS,
> >> node, &dev);
> >> + if (ret) {
> >> + debug("Not found usb-control device\n");
> >> + return ret;
> >> + }
> >> +
> >> + /* find the dwc2 node */
> >> + dwc2_node = fdt_node_offset_by_compatible(blob, node,
> >> +
> >> "amlogic,meson-g12a-usb");
> >> + if (dwc2_node < 0) {
> >> + debug("Not found dwc2 node\n");
> >> + return -ENODEV;
> >> + }
> >> +
> >> + if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
> >> + debug("dwc2 is disabled in the device tree\n");
> >> + return -ENODEV;
> >> + }
> >> +
> >> + meson_g12a_dwc2_data.regs_otg = fdtdec_get_addr(blob,
> >> dwc2_node, "reg");
> >> + if (meson_g12a_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
> >> + debug("usbotg: can't get base address\n");
> >> + return -ENODATA;
> >> + }
> >> +
> >> + /* Enable clock */
> >> + ret = fdtdec_parse_phandle_with_args(blob, dwc2_node,
> >> "clocks",
> >> + "#clock-cells", 0, 0,
> >> &args);
> >> + if (ret) {
> >> + debug("usbotg has no clocks defined in the device
> >> tree\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = uclass_get_device_by_of_offset(UCLASS_CLK,
> >> args.node, &clk_dev);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + if (args.args_count != 1) {
> >> + debug("Can't find clock ID in the device tree\n");
> >> + return -ENODATA;
> >> + }
> >> +
> >> + clk.dev = clk_dev;
> >> + clk.id = args.args[0];
> >> +
> >> + ret = clk_enable(&clk);
> >> + if (ret) {
> >> + debug("Failed to enable usbotg clock\n");
> >> + return ret;
> >> + }
> >> +
> >> + meson_g12a_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob,
> >> dwc2_node,
> >> +
> >> "g-rx-fifo-size", 0);
> >> + meson_g12a_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob,
> >> dwc2_node,
> >> + "g-np-tx-fifo-size",
> >> 0);
> >> + meson_g12a_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob,
> >> dwc2_node,
> >> +
> >> "g-tx-fifo-size", 0); +
> >> + /* Switch to peripheral mode */
> >> + ret = dwc3_meson_g12a_force_mode(dev,
> >> USB_DR_MODE_PERIPHERAL);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + return dwc2_udc_probe(&meson_g12a_dwc2_data);
> >> +}
> >> +
> >> +int board_usb_cleanup(int index, enum usb_init_type init)
> >> +{
> >> + const void *blob = gd->fdt_blob;
> >> + struct udevice *dev;
> >> + int node;
> >> + int ret;
> >> +
> >> + /* find the usb glue node */
> >> + node = fdt_node_offset_by_compatible(blob, -1,
> >> +
> >> "amlogic,meson-g12a-usb-ctrl");
> >> + if (node < 0)
> >> + return -ENODEV;
> >> +
> >> + if (!fdtdec_get_is_enabled(blob, node))
> >> + return -ENODEV;
> >> +
> >> + ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS,
> >> node, &dev);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + /* Switch to OTG mode */
> >> + ret = dwc3_meson_g12a_force_mode(dev, USB_DR_MODE_HOST);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + return 0;
> >> +}
> >> +#endif
> >
> >
> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de
> -----BEGIN PGP SIGNATURE-----
>
> iQEzBAEBCgAdFiEEiew9BYRGIXRQ8ihIFpq3saTP+K4FAlzQflgACgkQFpq3saTP
> +K7JKQgA1+32i8yaRlXm8TizXE5CT9SpGN91mLVzNnPYFCapi/Y/o1pirNDy2lVF
> tsd13N94+Z8U6cNEnDaaELaM8E+A0phDF3olBvbZ++76kcBcbZtsEb1slxjTyLC2
> pEBGRbNrmmUzCS8s0NyrtTeuHhgVLz6F/krGHkrxwak9G4xC/7MK5SyhyDeVGHgu
> GvAxDUqw204L+2kzGmVmX0/QZEPnpd/pszSlYSXoeNbiBTSNKRI3S4ZVYaI/KWdx
> kkOaWYq5lrph5TrQmnCPBgegsurjxbRp+WuZciThLxvqXuhI0sA47+2odedxkzVB
> ST+CG785r/lhIBqAGMA5YxBjMEEdVA==
> =iC0M
> -----END PGP SIGNATURE-----
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/5fb00bac/attachment.sig>
More information about the U-Boot
mailing list