[U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards

Thu May 9 07:07:43 UTC 2019

Hi,

On Wed, 2019-05-08 at 11:11 +0530, Jagan Teki wrote:
> (Sorry for the noice, I have missed to send two patches from v7)
> 
> This is v7 resend patchset for New rk3399 boards support wrt previous
> version[1]
> 
> Unfortunately initial version of creating rk3399-u-boot.dtsi and 
> orangepi rk3399 changes are merged, so this is rework on top of 
> u-boot-rockchip/master.
> 
> Overall this series add support below rk3399 boards
> - NanoPI M4
> - NanoPC T4
> - NanoPI NEO4
> - Orangepi RK3399
> - Rock PI 4
> - Rockpro64
> 
> All the respective dts(i) files are synced from Linux 5.1-rc2 and few
> dts(i) from linux-next.
> 
> SoC u-boot specific dtsi rk3399-u-boot.dtsi changes are part of another
> series [3].
> 
> Out of all above boards Rockpor64, Rock-PI and Nanopi NEO4 would support
> booting via Rockchip miniloader as of now.

Could you send these two boards in a separate series so that we avoid
merging them for now (because SPL support is broken) and then re-
iterate the series later with the DDR bringup? Or maybe find a way to
disable SPL support, but in any case, it's not ok to merge a board with
SPL enabled and broken.

Cheers,

Paul

> For booting the same with SPL NEO4 would require dynamic dram timing
> detection and rest require LPDDR4 code. There is WIP[2] for these
> dependencies and this would require big chunk of changes will effect
> all the rk3399 boards, so I'm planning to mark it for next MW. 
> 
> Changes for v7:
> - rebase on top of u-boot-rockchip/master
> - add SPL_TEXT_BASE on each board defconfig
> - rebase on required changes
> Changes for v6:
> - Include Nanopc T4 support patch
> - drop rk3399-u-boot.dtsi patch since it is send separately.
> Changes for v5:
> - Make all changes related to move sdmmc, spi1 u-boot,dm-pre-reloc
>   properties into all rk3399 dts(i) files.
> Changes for v4:
> - don't include existing dts(i) sdmmc, u-boot,dm-pre-reloc into
>   rk3399-u-boot.dtsi
> Changes for v3:
> - drop NanoPC T4 for now, since board is yet to receive.
> - add Rock PI-4 board.
> - add separate -u-boot.dtsi file for nanopi4 sdram changes.
> - collect Paul, Philipp and Kever Reviewed-by tags
> 
> Travis-CI:
> https://travis-ci.org/openedev/u-boot-amarula/builds/529284236
> 
> [1] https://patchwork.ozlabs.org/cover/1096473/
> [2] https://github.com/amarula/u-boot-amarula/tree/rockdev-lpddr4
> [3] https://patchwork.ozlabs.org/cover/1091909/
> 
> Any inputs?
> Jagan.
> 
> Jagan Teki (11):
>   rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
>   Kconfig: Add default SPL_FIT_GENERATOR for rockchip
>   arm: rockchip: rk3399: Move common configs in Kconfig
>   rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
>   rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
>   rockchip: rk3399: Add Nanopi M4 board support
>   rockchip: rk3399: Add Nanopc T4 board support
>   rockchip: rk3399: Add Nanopi NEO4 board support
>   rockchip: rk3399: Add Rockpro64 board support
>   rockchip: rk3399: Add Rock PI 4 support
>   doc: rockchip: Add global doc for rk3399 build/flash
> 
>  Kconfig                                     |   1 +
>  arch/arm/dts/Makefile                       |   5 +
>  arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi   |   7 +
>  arch/arm/dts/rk3399-nanopc-t4.dts           |  91 +++
>  arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi   |   7 +
>  arch/arm/dts/rk3399-nanopi-m4.dts           |  66 ++
>  arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi |   6 +
>  arch/arm/dts/rk3399-nanopi-neo4.dts         |  50 ++
>  arch/arm/dts/rk3399-nanopi4-u-boot.dtsi     |  11 +
>  arch/arm/dts/rk3399-nanopi4.dtsi            | 703 +++++++++++++++++++
>  arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi   |   6 +
>  arch/arm/dts/rk3399-rock-pi-4.dts           | 606 +++++++++++++++++
>  arch/arm/dts/rk3399-rockpro64-u-boot.dtsi   |   6 +
>  arch/arm/dts/rk3399-rockpro64.dts           | 712 ++++++++++++++++++++
>  arch/arm/dts/rk3399.dtsi                    |   5 +
>  arch/arm/mach-rockchip/Kconfig              |  16 +
>  board/rockchip/evb_rk3399/MAINTAINERS       |  32 +
>  configs/chromebook_bob_defconfig            |  17 -
>  configs/evb-rk3399_defconfig                |  17 -
>  configs/ficus-rk3399_defconfig              |  17 -
>  configs/firefly-rk3399_defconfig            |  17 -
>  configs/nanopc-t4-rk3399_defconfig          |  59 ++
>  configs/nanopi-m4-rk3399_defconfig          |  59 ++
>  configs/nanopi-neo4-rk3399_defconfig        |  59 ++
>  configs/orangepi-rk3399_defconfig           |  17 -
>  configs/puma-rk3399_defconfig               |  16 -
>  configs/rock-pi-4-rk3399_defconfig          |  59 ++
>  configs/rock960-rk3399_defconfig            |  17 -
>  configs/rockpro64-rk3399_defconfig          |  59 ++
>  doc/README.rockchip                         | 233 ++++++-
>  30 files changed, 2857 insertions(+), 119 deletions(-)
>  create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
>  create mode 100644 arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-nanopi-m4.dts
>  create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts
>  create mode 100644 arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-nanopi4.dtsi
>  create mode 100644 arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-rock-pi-4.dts
>  create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-rockpro64.dts
>  create mode 100644 configs/nanopc-t4-rk3399_defconfig
>  create mode 100644 configs/nanopi-m4-rk3399_defconfig
>  create mode 100644 configs/nanopi-neo4-rk3399_defconfig
>  create mode 100644 configs/rock-pi-4-rk3399_defconfig
>  create mode 100644 configs/rockpro64-rk3399_defconfig
> 
-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com