[U-Boot] [PATCH 6/8] mt_ventoux: remove board
Bartosz Golaszewski
brgl at bgdev.pl
Fri May 17 09:17:18 UTC 2019
From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
arch/arm/include/asm/mach-types.h | 1 -
arch/arm/mach-omap2/omap3/Kconfig | 6 -
board/teejet/mt_ventoux/Kconfig | 12 -
board/teejet/mt_ventoux/MAINTAINERS | 6 -
board/teejet/mt_ventoux/Makefile | 7 -
board/teejet/mt_ventoux/mt_ventoux.c | 342 -----------------------
board/teejet/mt_ventoux/mt_ventoux.h | 403 ---------------------------
configs/mt_ventoux_defconfig | 54 ----
include/configs/mt_ventoux.h | 46 ---
9 files changed, 877 deletions(-)
delete mode 100644 board/teejet/mt_ventoux/Kconfig
delete mode 100644 board/teejet/mt_ventoux/MAINTAINERS
delete mode 100644 board/teejet/mt_ventoux/Makefile
delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.c
delete mode 100644 board/teejet/mt_ventoux/mt_ventoux.h
delete mode 100644 configs/mt_ventoux_defconfig
delete mode 100644 include/configs/mt_ventoux.h
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index a3a2b729b1..9b38e36c87 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -3772,7 +3772,6 @@
#define MACH_TYPE_IMXT_NAV 3829
#define MACH_TYPE_IMXT_FULL 3830
#define MACH_TYPE_AG09015 3831
-#define MACH_TYPE_AM3517_MT_VENTOUX 3832
#define MACH_TYPE_DP1ARM9 3833
#define MACH_TYPE_PICASSO_M 3834
#define MACH_TYPE_VIDEO_GADGET 3835
diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 9bc616c286..96579e5de9 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -34,11 +34,6 @@ config TARGET_AM3517_EVM
select DM_SERIAL
imply CMD_DM
-config TARGET_MT_VENTOUX
- bool "TeeJet Mt.Ventoux"
- select OMAP3_GPIO_4
- select OMAP3_GPIO_5 if USB_EHCI_HCD
-
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select DM
@@ -189,7 +184,6 @@ config SYS_SOC
default "omap3"
source "board/logicpd/am3517evm/Kconfig"
-source "board/teejet/mt_ventoux/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
source "board/timll/devkit8000/Kconfig"
diff --git a/board/teejet/mt_ventoux/Kconfig b/board/teejet/mt_ventoux/Kconfig
deleted file mode 100644
index fd7196a6f9..0000000000
--- a/board/teejet/mt_ventoux/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MT_VENTOUX
-
-config SYS_BOARD
- default "mt_ventoux"
-
-config SYS_VENDOR
- default "teejet"
-
-config SYS_CONFIG_NAME
- default "mt_ventoux"
-
-endif
diff --git a/board/teejet/mt_ventoux/MAINTAINERS b/board/teejet/mt_ventoux/MAINTAINERS
deleted file mode 100644
index d23464c20f..0000000000
--- a/board/teejet/mt_ventoux/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MT_VENTOUX BOARD
-M: Stefano Babic <sbabic at denx.de>
-S: Maintained
-F: board/teejet/mt_ventoux/
-F: include/configs/mt_ventoux.h
-F: configs/mt_ventoux_defconfig
diff --git a/board/teejet/mt_ventoux/Makefile b/board/teejet/mt_ventoux/Makefile
deleted file mode 100644
index f007156286..0000000000
--- a/board/teejet/mt_ventoux/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
-#
-# Based on ti/evm/Makefile
-
-obj-y := mt_ventoux.o
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
deleted file mode 100644
index 33de7a2131..0000000000
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ /dev/null
@@ -1,342 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <fpga.h>
-#include <video_fb.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/omap_gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/dss.h>
-#include <asm/arch/clock.h>
-#include <i2c.h>
-#include <spartan3.h>
-#include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-#include "mt_ventoux.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BUZZER 140
-#define SPEAKER 141
-#define USB1_PWR 127
-#define USB2_PWR 149
-
-#ifndef CONFIG_FPGA
-#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
-#endif
-
-#define FPGA_RESET 62
-#define FPGA_PROG 116
-#define FPGA_CCLK 117
-#define FPGA_DIN 118
-#define FPGA_INIT 119
-#define FPGA_DONE 154
-
-#define LCD_PWR 138
-#define LCD_PON_PIN 139
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-static struct {
- u32 xres;
- u32 yres;
-} panel_resolution[] = {
- { 480, 272 },
- { 800, 480 }
-};
-
-static struct panel_config lcd_cfg[] = {
- {
- .timing_h = PANEL_TIMING_H(40, 5, 2),
- .timing_v = PANEL_TIMING_V(8, 8, 2),
- .pol_freq = 0x00003000, /* Pol Freq */
- .divisor = 0x00010033, /* 9 Mhz Pixel Clock */
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = 0,
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
- },
- {
- .timing_h = PANEL_TIMING_H(20, 192, 4),
- .timing_v = PANEL_TIMING_V(2, 20, 10),
- .pol_freq = 0x00004000, /* Pol Freq */
- .divisor = 0x0001000E, /* 36Mhz Pixel Clock */
- .panel_type = 0x01, /* TFT */
- .data_lines = 0x03, /* 24 Bit RGB */
- .load_mode = 0x02, /* Frame Mode */
- .panel_color = 0,
- .gfx_format = GFXFORMAT_RGB24_UNPACKED,
- }
-};
-#endif
-
-/* Timing definitions for FPGA */
-static const u32 gpmc_fpga[] = {
- FPGA_GPMC_CONFIG1,
- FPGA_GPMC_CONFIG2,
- FPGA_GPMC_CONFIG3,
- FPGA_GPMC_CONFIG4,
- FPGA_GPMC_CONFIG5,
- FPGA_GPMC_CONFIG6,
-};
-
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
-
-static inline void fpga_reset(int nassert)
-{
- gpio_set_value(FPGA_RESET, !nassert);
-}
-
-int fpga_pgm_fn(int nassert, int nflush, int cookie)
-{
- debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
-
- gpio_set_value(FPGA_PROG, !nassert);
-
- return nassert;
-}
-
-int fpga_init_fn(int cookie)
-{
- return !gpio_get_value(FPGA_INIT);
-}
-
-int fpga_done_fn(int cookie)
-{
- return gpio_get_value(FPGA_DONE);
-}
-
-int fpga_pre_config_fn(int cookie)
-{
- debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
-
- /* Setting GPIOs for programming Mode */
- gpio_request(FPGA_RESET, "FPGA_RESET");
- gpio_direction_output(FPGA_RESET, 1);
- gpio_request(FPGA_PROG, "FPGA_PROG");
- gpio_direction_output(FPGA_PROG, 1);
- gpio_request(FPGA_CCLK, "FPGA_CCLK");
- gpio_direction_output(FPGA_CCLK, 1);
- gpio_request(FPGA_DIN, "FPGA_DIN");
- gpio_direction_output(FPGA_DIN, 0);
- gpio_request(FPGA_INIT, "FPGA_INIT");
- gpio_direction_input(FPGA_INIT);
- gpio_request(FPGA_DONE, "FPGA_DONE");
- gpio_direction_input(FPGA_DONE);
-
- /* Be sure that signal are deasserted */
- gpio_set_value(FPGA_RESET, 1);
- gpio_set_value(FPGA_PROG, 1);
-
- return 0;
-}
-
-int fpga_post_config_fn(int cookie)
-{
- debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
-
- fpga_reset(true);
- udelay(100);
- fpga_reset(false);
-
- return 0;
-}
-
-/* Write program to the FPGA */
-int fpga_wr_fn(int nassert_write, int flush, int cookie)
-{
- gpio_set_value(FPGA_DIN, nassert_write);
-
- return nassert_write;
-}
-
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
- gpio_set_value(FPGA_CCLK, assert_clk);
-
- return assert_clk;
-}
-
-xilinx_spartan3_slave_serial_fns mt_ventoux_fpga_fns = {
- fpga_pre_config_fn,
- fpga_pgm_fn,
- fpga_clk_fn,
- fpga_init_fn,
- fpga_done_fn,
- fpga_wr_fn,
- fpga_post_config_fn,
-};
-
-xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
- (void *)&mt_ventoux_fpga_fns, 0);
-
-/* Initialize the FPGA */
-static void mt_ventoux_init_fpga(void)
-{
- fpga_pre_config_fn(0);
-
- /* Setting CS1 for FPGA access */
- enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
- FPGA_BASE_ADDR, GPMC_SIZE_128M);
-
- fpga_init();
- fpga_add(fpga_xilinx, &fpga);
-}
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-
- /* boot param addr */
- gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
- mt_ventoux_init_fpga();
-
- /* GPIO_140: speaker #mute */
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4))
- /* GPIO_141: Buzz Hi */
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4))
-
- /* Turning off the buzzer */
- gpio_request(BUZZER, "BUZZER_MUTE");
- gpio_request(SPEAKER, "SPEAKER");
- gpio_direction_output(BUZZER, 0);
- gpio_direction_output(SPEAKER, 0);
-
- /* Activate USB power */
- gpio_request(USB1_PWR, "USB1_PWR");
- gpio_request(USB2_PWR, "USB2_PWR");
- gpio_direction_output(USB1_PWR, 1);
- gpio_direction_output(USB2_PWR, 1);
-
- return 0;
-}
-
-#ifndef CONFIG_SPL_BUILD
-int misc_init_r(void)
-{
- char *eth_addr;
- struct tam3517_module_info info;
- int ret;
-
- TAM3517_READ_EEPROM(&info, ret);
- omap_die_id_display();
-
- if (ret)
- return 0;
- eth_addr = env_get("ethaddr");
- if (!eth_addr)
- TAM3517_READ_MAC_FROM_EEPROM(&info);
-
- TAM3517_PRINT_SOM_INFO(&info);
- return 0;
-}
-#endif
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- * hardware. Many pins need to be moved from protect to primary
- * mode.
- */
-void set_muxconf_regs(void)
-{
- MUX_MT_VENTOUX();
-}
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int board_eth_init(bd_t *bis)
-{
- davinci_emac_initialize();
- return 0;
-}
-
-#if defined(CONFIG_MMC_OMAP_HS) && \
- !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
-int board_video_init(void)
-{
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- struct panel_config *panel = &lcd_cfg[0];
- char *s;
- u32 index = 0;
-
- void *fb;
-
- fb = (void *)0x88000000;
-
- s = env_get("panel");
- if (s) {
- index = simple_strtoul(s, NULL, 10);
- if (index < ARRAY_SIZE(lcd_cfg))
- panel = &lcd_cfg[index];
- else
- return 0;
- }
-
- panel->frame_buffer = fb;
- printf("Panel: %dx%d\n", panel_resolution[index].xres,
- panel_resolution[index].yres);
- panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
- (panel_resolution[index].xres - 1);
-
- gpio_request(LCD_PWR, "LCD Power");
- gpio_request(LCD_PON_PIN, "LCD Pon");
- gpio_direction_output(LCD_PWR, 0);
- gpio_direction_output(LCD_PON_PIN, 1);
-
-
- setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
- setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
-
- omap3_dss_panel_config(panel);
- omap3_dss_enable();
-
- return 0;
-}
-#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
deleted file mode 100644
index 5e01774234..0000000000
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Stefano Babic <sbabic at denx.de>
- *
- * Author: Hardy Weng <hardy.weng at technexion.com>
- *
- * Copyright (C) 2010 TechNexion Ltd.
- */
-
-#ifndef _MT_VENTOUX_H_
-#define _MT_VENTOUX_H_
-
-const omap3_sysinfo sysinfo = {
- DDR_DISCRETE,
- "Teejet MT_VENTOUX Board",
- "NAND",
-};
-
-/* FPGA CS1 configuration */
-#define FPGA_GPMC_CONFIG1 0x00001200
-#define FPGA_GPMC_CONFIG2 0x00161f00
-#define FPGA_GPMC_CONFIG3 0x00040400
-#define FPGA_GPMC_CONFIG4 0x120c1f08
-#define FPGA_GPMC_CONFIG5 0x001e161f
-#define FPGA_GPMC_CONFIG6 0x96080fcf
-
-#define FPGA_BASE_ADDR 0x20000000
-
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_MT_VENTOUX() \
- /* SDRC */\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SDRC_CKE0), (M0)) \
- MUX_VAL(CP(SDRC_CKE1), (M0)) \
- MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
- /* GPMC */\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NCS2), (IDIS | PTD | EN | M4))/* GPIO 53 */\
- MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /* GPIO 54 */\
- MUX_VAL(CP(GPMC_NCS4), (IEN | PTD | EN | M4)) \
- /* GPIO 55 : NFS */\
- MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_NCS6), (IDIS | PTD | EN | M3)) /*PWM11*/ \
- MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | EN | M4)) /*GPIO_58*/ \
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M4)) \
- /*GPIO_62: FPGA_RESET */ \
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \
- /* GPIO_64*/ \
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \
- /* DSS */\
- MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
- /* CAMERA */\
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
- /* MMC */\
- MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
- /* GPIO_126: CardDetect */\
- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
- /*GPIO_128 */ \
- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
- MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) /*MMC2_CMD*/\
- MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) /*MMC2_DAT0*/\
- MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) /*MMC2_DAT1*/\
- MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) /*MMC2_DAT2*/\
- MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) /*MMC2_DAT3*/\
- MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \
- MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \
- /* GPIO_138: LCD_ENVD */\
- MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | EN | M4)) \
- /* GPIO_139: LCD_PON */\
- /* McBSP */\
- MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
- MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
- \
- MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | EN | M4)) \
- /* GPIO_116: FPGA_PROG */ \
- MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | EN | M4)) \
- /* GPIO_117: FPGA_CCLK */ \
- MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | EN | M4)) \
- /* GPIO_118: FPGA_DIN */ \
- MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \
- /* GPIO_119: FPGA_INIT */ \
- \
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \
- \
- MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) \
- /*GPIO_152: Ignition Sense */ \
- MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M4)) \
- /*GPIO_153: Power Button Sense */ \
- MUX_VAL(CP(MCBSP4_DX), (IEN | PTU | DIS | M4)) \
- /* GPIO_154: FPGA_DONE */ \
- MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M4)) \
- /* GPIO_155: CA8_irq */ \
- /* UART */\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(UART1_RTS), (IEN | PTU | EN | M4)) \
- /* GPIO_149: USB status 2 */\
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) \
- /* GPIO_150: USB status 1 */\
- \
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M2)) \
- /* gpt9_pwm */\
- MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M2)) \
- /* gpt10_pwm */\
- MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M2)) \
- /* gpt8_pwm */\
- MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M2)) \
- /* gpt11_pwm */\
- \
- MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) \
- /*GPIO_163 : TS_PENIRQ*/ \
- MUX_VAL(CP(UART3_RTS_SD), (IEN | PTD | DIS | M4)) \
- /*GPIO_164 : MMC */\
- MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
- /* I2C */\
- MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
- /* McSPI */\
- MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
- MUX_VAL(CP(MCSPI1_CS2), (IEN | PTD | EN | M4)) /*GPIO_176*/\
- MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M4)) \
- \
- MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) \
- /* CCDC */\
- MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M4)) \
- /* GPIO94 */\
- MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M4)) \
- /* GPIO95: #Enable Output */\
- MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M4)) \
- /* GPIO 99: #SOM_PWR_OFF */\
- MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M4)) \
- /* GPIO_100: #power out */\
- MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M4)) \
- /* GPIO_102 */\
- MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M4)) \
- /* RMII */\
- MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
- MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
- MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
- MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
- MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
- MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
- /* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
- /* HSUSB */\
- MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_NXT), (IEN | PTU | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
- /* HDQ */\
- MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) \
- /* GPIO_170: auto update */\
- /* Control and debug */\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
- /* - GPIO30 */\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
- MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
- MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
- \
- MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) \
- /* gpio_10 */\
- MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
- /* JTAG */\
- MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(JTAG_EMU0), (IDIS | PTD | EN | M4)) /*GPIO_11*/ \
- MUX_VAL(CP(JTAG_EMU1), (IDIS | PTD | EN | M4)) /*GPIO_31*/ \
- /* ETK (ES2 onwards) */\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_stp */ \
- MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) \
- /* hsusb1_clk */\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \
- MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) \
- /* gpio_24 */\
- MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \
- /* gpio_26 */\
- MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) \
- MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \
- MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \
- /* gpio_29 */\
- /* Die to Die */\
- MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
- MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
- MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
-
-#endif
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
deleted file mode 100644
index 4414875e09..0000000000
--- a/configs/mt_ventoux_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80008000
-CONFIG_TARGET_MT_VENTOUX=y
-CONFIG_EMIF4=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=10
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SPL_TEXT_BASE=0x40200000
-# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="mt_ventoux => "
-CONFIG_CMD_EEPROM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),8m(ubisystem),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_SPARTAN3=y
-CONFIG_SYS_OMAP24_I2C_SPEED=400000
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_EMAC=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT_OMAP=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_OMAP3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
deleted file mode 100644
index e590364441..0000000000
--- a/include/configs/mt_ventoux.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
- *
- *
- * Configuration settings for the Teejet mt_ventoux board.
- *
- * Copyright (C) 2009 TechNexion Ltd.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "tam3517-common.h"
-
-#undef CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10) + \
- 6 * 1024 * 1024)
-
-#define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX
-
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_HOSTNAME "mt_ventoux"
-
-/*
- * Set its own mtdparts, different from common
- */
-
-/*
- * FPGA
- */
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_WAIT 10000
-#define CONFIG_MAX_FPGA_DEVICES 1
-#define CONFIG_FPGA_DELAY() udelay(1)
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_VIDEO_BMP_RLE8
-
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
- "bootcmd=run net_nfs\0"
-
-#endif /* __CONFIG_H */
--
2.21.0
More information about the U-Boot
mailing list