[U-Boot] [PATCH v2 1/6] stm32mp1: clk: use the correct identifier for ethck
Christophe Roullier
christophe.roullier at st.com
Fri May 17 13:08:42 UTC 2019
From: Patrick Delaunay <patrick.delaunay at st.com>
ETHCK_K is the identifier the kernel clock for ETH in kernel
binding, selected by ETHKSELR / gated by ETHCKEN = BIT(7).
U-Boot driver need to use the same identifier, so change ETHCK
to ETHCK_K.
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
Signed-off-by: Christophe Roullier <christophe.roullier at st.com>
---
Changes in v2: None
drivers/clk/clk_stm32mp1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 24859fd054e..422176f3dde 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -555,7 +555,7 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = {
STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 0, GPIOZ, _UNKNOWN_SEL),
- STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK, _ETH_SEL),
+ STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK_K, _ETH_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 8, ETHTX, _UNKNOWN_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 9, ETHRX, _UNKNOWN_SEL),
STM32MP1_CLK_SET_CLR_F(RCC_MP_AHB6ENSETR, 10, ETHMAC, _ACLK),
--
2.17.1
More information about the U-Boot
mailing list