[U-Boot] [PATCH v2 2/6] board: stm32mp1: Add board_interface_eth_init

Christophe Roullier christophe.roullier at st.com
Fri May 17 13:08:43 UTC 2019


Called to configure Ethernet PHY interface selection and
configure clock selection in RCC Ethernet clock tree.

Signed-off-by: Christophe Roullier <christophe.roullier at st.com>
---

Changes in v2: None

 board/st/stm32mp1/stm32mp1.c | 68 ++++++++++++++++++++++++++++++++++--
 1 file changed, 65 insertions(+), 3 deletions(-)

diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 76917b022ed..e120fc57223 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -51,9 +51,9 @@
 #define SYSCFG_PMCSETR_ETH_SELMII	BIT(20)
 
 #define SYSCFG_PMCSETR_ETH_SEL_MASK	GENMASK(23, 21)
-#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII	(0 << 21)
-#define SYSCFG_PMCSETR_ETH_SEL_RGMII	(1 << 21)
-#define SYSCFG_PMCSETR_ETH_SEL_RMII	(4 << 21)
+#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII	0
+#define SYSCFG_PMCSETR_ETH_SEL_RGMII	BIT(21)
+#define SYSCFG_PMCSETR_ETH_SEL_RMII	BIT(23)
 
 /*
  * Get a global data pointer
@@ -504,3 +504,65 @@ void board_quiesce_devices(void)
 {
 	setup_led(LEDST_OFF);
 }
+
+/* board interface eth init */
+/* this is a weak define that we are overriding */
+int board_interface_eth_init(phy_interface_t interface_type,
+			     bool eth_clk_sel_reg, bool eth_ref_clk_sel_reg)
+{
+	u8 *syscfg;
+	u32 value;
+
+	syscfg = (u8 *)syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
+
+	if (!syscfg)
+		return -ENODEV;
+
+	switch (interface_type) {
+	case PHY_INTERFACE_MODE_MII:
+		value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII |
+			SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
+		debug("%s: PHY_INTERFACE_MODE_MII\n", __func__);
+		break;
+	case PHY_INTERFACE_MODE_GMII:
+		if (eth_clk_sel_reg)
+			value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII |
+				SYSCFG_PMCSETR_ETH_CLK_SEL;
+		else
+			value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII;
+		debug("%s: PHY_INTERFACE_MODE_GMII\n", __func__);
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		if (eth_ref_clk_sel_reg)
+			value = SYSCFG_PMCSETR_ETH_SEL_RMII |
+				SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
+		else
+			value = SYSCFG_PMCSETR_ETH_SEL_RMII;
+		debug("%s: PHY_INTERFACE_MODE_RMII\n", __func__);
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		if (eth_clk_sel_reg)
+			value = SYSCFG_PMCSETR_ETH_SEL_RGMII |
+				SYSCFG_PMCSETR_ETH_CLK_SEL;
+		else
+			value = SYSCFG_PMCSETR_ETH_SEL_RGMII;
+		debug("%s: PHY_INTERFACE_MODE_RGMII\n", __func__);
+		break;
+	default:
+		debug("%s: Do not manage %d interface\n",
+		      __func__, interface_type);
+		/* Do not manage others interfaces */
+		return -EINVAL;
+	}
+
+	/* clear and set ETH configuration bits */
+	writel(SYSCFG_PMCSETR_ETH_SEL_MASK | SYSCFG_PMCSETR_ETH_SELMII |
+	       SYSCFG_PMCSETR_ETH_REF_CLK_SEL | SYSCFG_PMCSETR_ETH_CLK_SEL,
+	       syscfg + SYSCFG_PMCCLRR);
+	writel(value, syscfg + SYSCFG_PMCSETR);
+
+	return 0;
+}
-- 
2.17.1



More information about the U-Boot mailing list