[U-Boot] [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver

[Bin Meng]

Hi,

On Fri, May 24, 2019 at 12:04 AM Z.q. Hou <zhiqiang.hou at nxp.com> wrote:
>
> Hi Bin,
>
> Thanks a lot for your comments!
>
> > -----Original Message-----
> > From: Bin Meng [mailto:bmeng.cn at gmail.com]
> > Sent: 2019年5月23日 22:23
> > To: Z.q. Hou <zhiqiang.hou at nxp.com>
> > Cc: u-boot at lists.denx.de; Prabhakar Kushwaha
> > <prabhakar.kushwaha at nxp.com>; wd at denx.de; Shengzhou Liu
> > <shengzhou.liu at nxp.com>; Jagdish Gediya <jagdish.gediya at nxp.com>;
> > sjg at chromium.org; ley.foon.tan at intel.com; sr at denx.de; M.h. Lian
> > <minghuan.lian at nxp.com>; Xiaowei Bao <xiaowei.bao at nxp.com>
> > Subject: Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver
> >
> > On Thu, May 23, 2019 at 8:22 PM Z.q. Hou <zhiqiang.hou at nxp.com> wrote:
> > >
> > > From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> > >
> > > Enable the DM PCIe driver in T2080QDS defconfig.
> > >
> > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> > > ---
> > > V2:
> > >  - Enable PCIe in NAND flash, SD card and SPI flash boot defconfig.
> > >
> > >  configs/T2080QDS_NAND_defconfig     | 4 ++++
> > >  configs/T2080QDS_SDCARD_defconfig   | 4 ++++
> > >  configs/T2080QDS_SPIFLASH_defconfig | 4 ++++
> > >  configs/T2080QDS_defconfig          | 4 ++++
> > >  4 files changed, 16 insertions(+)
> > >
> > > diff --git a/configs/T2080QDS_NAND_defconfig
> > > b/configs/T2080QDS_NAND_defconfig index 948a05af89..d04e223c23
> > 100644
> > > --- a/configs/T2080QDS_NAND_defconfig
> > > +++ b/configs/T2080QDS_NAND_defconfig
> > > @@ -38,6 +38,7 @@
> > >
> > CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kern
> > el),1
> > > 28k(dtb),9
> > >  CONFIG_OF_CONTROL=y
> > >  CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
> > >  CONFIG_ENV_IS_IN_NAND=y
> > > +CONFIG_DM=y
> > >  CONFIG_FSL_CAAM=y
> > >  CONFIG_FSL_ESDHC=y
> > >  CONFIG_MTD_NOR_FLASH=y
> > > @@ -54,6 +55,9 @@ CONFIG_PHYLIB=y
> > >  CONFIG_PHY_AQUANTIA=y
> > >  CONFIG_E1000=y
> > >  CONFIG_MII=y
> > > +CONFIG_DM_PCI=y
> > > +CONFIG_DM_PCI_COMPAT=y
> >
> > I think we should avoid adding DM_PCI_COMPAT.
>
> Without this macro the non-DM Endpoint driver (such as e1000) won't work.

e1000 is a fully DM driver now. Please redo the testing.

Regards,
Bin