[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Peng Fan]

Hi Fabio

Booting from SD3, it works for me. See below log.

"
U-Boot SPL 2019.07-rc2 (May 17 2019 - 10:24:45 +0800)
Trying to boot from MMC1


U-Boot 2019.07-rc2 (May 17 2019 - 10:24:45 +0800)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C)Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
"

Regards,
Peng.

> -----Original Message-----
> From: Fabio Estevam [mailto:festevam at gmail.com]
> Sent: 2019年5月17日 1:33
> To: Stefano Babic <sbabic at denx.de>; dl-uboot-imx <uboot-imx at nxp.com>
> Cc: Lukasz Majewski <lukma at denx.de>; Jagan Teki
> <jagan at amarulasolutions.com>; Michael Trimarchi
> <michael at amarulasolutions.com>; U-Boot-Denx <u-boot at lists.denx.de>
> Subject: Cannot boot mx6qsabred with 2019.07-rc2
> 
> Hi,
> 
> I get the following error when trying to boot mx6q sabresd with 2019.07-rc2:
> 
> U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300) Trying to boot from
> MMC1
> spl: could not find mmc device 0. error: -19
> SPL: failed to boot from all boot devices ### ERROR ### Please RESET the
> board ###
> 
> I haven't debugged this yet.
> 
> Does anyone have any ideas?
> 
> Thanks,
> 
> Fabio Estevam