[U-Boot] [PATCH 0/8] ARM: imx: Update VINING|2000 to DM/DT

[Marek Vasut]

Update Softing VINING|2000 to DM / DT and remove the warnings.
This depends on the following patches / series:

  http://patchwork.ozlabs.org/patch/1101222/
  http://patchwork.ozlabs.org/patch/1101230/
  https://patchwork.ozlabs.org/project/uboot/list/?series=108463

Marek Vasut (8):
  ARM: imx: Rename VINING|2000
  ARM: dts: imx: vining2000: Import VINING|2000 DT from Linux
  ARM: imx: vining2000: Enable DM pin control
  ARM: imx: vining2000: Convert MMC and block to DM
  ARM: imx: vining2000: Enable DM USB
  ARM: imx: vining2000: Enable DM GPIO
  ARM: imx: vining2000: Enable DM PCI
  ARM: imx: vining2000: Enable DM Serial

 arch/arm/dts/Makefile                         |   3 +-
 arch/arm/dts/imx6sx-softing-vining-2000.dts   | 578 ++++++++++++++++++
 arch/arm/mach-imx/mx6/Kconfig                 |   6 +-
 board/{samtec => softing}/vining_2000/Kconfig |   4 +-
 .../vining_2000/MAINTAINERS                   |   4 +-
 .../{samtec => softing}/vining_2000/Makefile  |   1 +
 .../vining_2000/imximage.cfg                  |   1 +
 .../vining_2000/vining_2000.c                 |  91 +--
 configs/vining_2000_defconfig                 |  20 +-
 include/configs/vining_2000.h                 |   3 -
 10 files changed, 608 insertions(+), 103 deletions(-)
 create mode 100644 arch/arm/dts/imx6sx-softing-vining-2000.dts
 rename board/{samtec => softing}/vining_2000/Kconfig (69%)
 rename board/{samtec => softing}/vining_2000/MAINTAINERS (57%)
 rename board/{samtec => softing}/vining_2000/Makefile (67%)
 rename board/{samtec => softing}/vining_2000/imximage.cfg (97%)
 rename board/{samtec => softing}/vining_2000/vining_2000.c (77%)

Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Silvio Fricke <silvio.fricke at softing.com>
Cc: Stefano Babic <sbabic at denx.de>
-- 
2.20.1