[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Peng Fan]

> Subject: Re: Cannot boot mx6qsabred with 2019.07-rc2
> 
> Hi Peng,
> 
> On Thu, May 16, 2019 at 11:17 PM Peng Fan <peng.fan at nxp.com> wrote:
> >
> > Hi Fabio
> >
> > Booting from SD3, it works for me. See below log.
> >
> > "
> > U-Boot SPL 2019.07-rc2 (May 17 2019 - 10:24:45 +0800) Trying to boot
> > from MMC1
> >
> >
> > U-Boot 2019.07-rc2 (May 17 2019 - 10:24:45 +0800)
> >
> > CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
> > CPU:   Automotive temperature grade (-40C to 125C)Reset cause: POR
> > Model: Freescale i.MX6 Quad SABRE Smart Device Board
> 
> Interesting.
> 
> It fails for me and for a customer with the same error log.
> 
> What could explain such difference?

You could enable DEBUG in SPL, and disable SPL_SDP because of size will exceeds.
Then see what happends.
I have no idea, then. My board is REV C4, chip 1.5

Regards,
Peng.