[U-Boot] [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node

[Peng Ma]

Hi prabhakar,

>-----Original Message-----
>From: Prabhakar Kushwaha
>Sent: 2019年5月22日 20:33
>To: Peng Ma <peng.ma at nxp.com>; albert.u.boot at aribaud.net;
>sjg at chromium.org; Fabio Estevam <fabio.estevam at nxp.com>; York Sun
><york.sun at nxp.com>
>Cc: Andy Tang <andy.tang at nxp.com>; Yinbo Zhu <yinbo.zhu at nxp.com>;
>michal.simek at xilinx.com; u-boot at lists.denx.de; Peng Ma
><peng.ma at nxp.com>
>Subject: RE: [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node
>
>
>> -----Original Message-----
>> From: Peng Ma <peng.ma at nxp.com>
>> Sent: Wednesday, April 17, 2019 1:19 PM
>> To: albert.u.boot at aribaud.net; sjg at chromium.org; Fabio Estevam
>> <fabio.estevam at nxp.com>; York Sun <york.sun at nxp.com>; Prabhakar
>> Kushwaha <prabhakar.kushwaha at nxp.com>
>> Cc: Andy Tang <andy.tang at nxp.com>; Yinbo Zhu <yinbo.zhu at nxp.com>;
>> michal.simek at xilinx.com; u-boot at lists.denx.de; Peng Ma
>> <peng.ma at nxp.com>
>> Subject: [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node
>>
>> Move the ecc addr from driver to dts.
>>
>> Signed-off-by: Peng Ma <peng.ma at nxp.com>
>> ---
>> changed for v2:
>> 	- Add reg-names to improve driver code.
>>
>
>fix chechpatch warning i.e. updated subject and applied to fsl-qoriq master,
>awaiting upstream
>
>Can you send patches for ls2088a and ls1028a also
[Peng Ma] ls2088a is not need to ecc address, I will
add ls1028 patch to upstream.

Best Regards,
Peng
>
>--pk