[U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Tue May 7 19:25:44 UTC 2019
On 07.05.19 21:14, Wolfgang Grandegger wrote:
>
> Am 07.05.19 um 13:37 schrieb Simon Goldschmidt:
>> On Tue, May 7, 2019 at 9:41 AM Wolfgang Grandegger <wg at aries-embedded.de> wrote:
>>>
>>>
>>>
>>> Am 06.05.19 um 22:16 schrieb Simon Goldschmidt:
>>>> Am 06.05.2019 um 17:45 schrieb Wolfgang Grandegger:
>>>>> Re-add support for Aries Embedded MCV SoM, which is CycloneV based
>>>>> and the associated MCVEVK baseboard. The board can boot from eMMC.
>>>>> Ethernet and USB is supported.
>>>>>
>>>>> The Aries Embedded boards have been removed with commit 03b54997d568
>>>>> ("board/aries: Remove"). I will now take care of them.
>>>>>
>>>>> Signed-off-by: Wolfgang Grandegger <wg at aries-embedded.de>
>>>>> CC: Marek Vasut <marex at denx.de>
>>>>> CC: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
>>>>> ---
>>>>> .travis.yml | 2 +-
>>>>> arch/arm/dts/Makefile | 1 +
>>>>> arch/arm/dts/socfpga_cyclone5_mcv.dtsi | 22 +
>>>>> arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi | 38 ++
>>>>> arch/arm/dts/socfpga_cyclone5_mcvevk.dts | 81 +++
>>>>> arch/arm/mach-socfpga/Kconfig | 7 +
>>>>> board/aries/mcvevk/MAINTAINERS | 6 +
>>>>> board/aries/mcvevk/Makefile | 7 +
>>>>> board/aries/mcvevk/qts/iocsr_config.h | 659
>>>>> +++++++++++++++++++++++
>>>>> board/aries/mcvevk/qts/pinmux_config.h | 218 ++++++++
>>>>> board/aries/mcvevk/qts/pll_config.h | 84 +++
>>>>> board/aries/mcvevk/qts/sdram_config.h | 343 ++++++++++++
>>>>
>>>> These files are always a mystery. Would you be able to provide
>>>> (long-lived) link to a simplistic quartus project so that everyone can
>>>> regenerate these?
>>>>
>>>> I'll try to provide such a quartus project for the socrates board, and
>>>> I'd be very happy if the original Intel dev boards could do so as well!
>>>
>>> There is a Quartus example project for that module/board here:
>>>
>>> https://github.com/ARIES-Embedded/mcv
>>
>> Cool. And is this a permanent link that we could add to some kind
>> of documentation for this board in the U-Boot sources? That would
>> ensure U-Boot maintainers can find it in the future...
>
> I will check with the author!
>
> BTW: My patch works fine on top of v2019.04 but the boot hangs without
> console output with the latest HEAD. The problems start with commit:
>
> ede6e7b reset: socfpga: add reset handling for old kernels
>
> Then I get:
>
> U-Boot SPL 2019.04-00508-g03b5c7e-dirty (May 07 2019 - 21:03:52 +0200)
> ### ERROR ### Please RESET the board ###
>
> Any idea how to fix that?
No, sorry, I don't have an idea right now. Are you sure you're not
missing any of the "u-boot,dm-pre-reloc" tags?
And you're absolutely sure this very commit produces this error?
Regards,
Simon
More information about the U-Boot
mailing list