[U-Boot] [PATCH v3 01/10] pinctrl: rockchip: Add pull-pin-default param and remove unused param

[Kever Yang]

On 04/16/2019 09:50 PM, David Wu wrote:
> Some Socs use the pull-pin-default config param, need to add it.
> And input-enable/disable config params are not necessary, remove it.
>
> Signed-off-by: David Wu <david.wu at rock-chips.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>
> Change in v3:
> - Add some commit message
>
>  drivers/pinctrl/rockchip/pinctrl-rockchip-core.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
> index b84b079064..77ac981c40 100644
> --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
> +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
> @@ -509,9 +509,8 @@ static const struct pinconf_param rockchip_conf_params[] = {
>  	{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
>  	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
>  	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
> +	{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
>  	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
> -	{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
> -	{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
>  	{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
>  	{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
>  };