[U-Boot] [PATCH] configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT

[Bartosz Golaszewski]

śr., 29 maj 2019 o 03:55 David Lechner <david at lechnology.com> napisał(a):
>
> On 5/28/19 8:52 PM, Adam Ford wrote:
> > On Tue, May 28, 2019 at 7:03 PM David Lechner <david at lechnology.com> wrote:
> >>
> >> This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config.
> >> On the EV3, U-Boot is loaded into RAM by another bootloader, so we
> >> don't need the lowlevel init in U-Boot.
> >>
> >> Signed-off-by: David Lechner <david at lechnology.com>
> >> ---
> >>   include/configs/legoev3.h | 1 +
> >>   1 file changed, 1 insertion(+)
> >>
> >> diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
> >> index 1e239ecadd..36ca3b201e 100644
> >> --- a/include/configs/legoev3.h
> >> +++ b/include/configs/legoev3.h
> >> @@ -22,6 +22,7 @@
> >>   #define CONFIG_SYS_OSCIN_FREQ          24000000
> >>   #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
> >>   #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
> >> +#define CONFIG_SKIP_LOWLEVEL_INIT
> >
> > If that's the case, does this mean that the NAK'd patch from Bartosz
> > removing the dead code can be accepted?
>
> Probably

I will resend the two patches in a single series to avoid confusion.

Bart