[U-Boot] [PATCH] net: davinci_emac: convert to using the driver model
Bartosz Golaszewski
brgl at bgdev.pl
Fri May 31 13:32:49 UTC 2019
From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
Now that we removed all legacy boards selecting TI_EMAC we can
completely convert the driver code to using the driver model.
This patch also updates all remaining users of davinci_emac.
Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
arch/arm/mach-davinci/cpu.c | 13 -----
arch/arm/mach-omap2/omap3/emac.c | 3 +-
board/davinci/da8xxevm/da850evm.c | 6 --
board/davinci/da8xxevm/omapl138_lcdk.c | 14 -----
board/logicpd/am3517evm/am3517evm.c | 1 -
board/ti/ti816x/evm.c | 3 +-
configs/am3517_evm_defconfig | 1 +
configs/da850evm_defconfig | 1 +
configs/da850evm_direct_nor_defconfig | 1 +
configs/da850evm_nand_defconfig | 1 +
configs/omapl138_lcdk_defconfig | 1 +
configs/ti816x_evm_defconfig | 1 +
drivers/net/ti/davinci_emac.c | 77 ++++++++++++++------------
include/netdev.h | 1 -
14 files changed, 51 insertions(+), 73 deletions(-)
diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c
index f97ad3fc74..9fd6564d04 100644
--- a/arch/arm/mach-davinci/cpu.c
+++ b/arch/arm/mach-davinci/cpu.c
@@ -5,7 +5,6 @@
*/
#include <common.h>
-#include <netdev.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
@@ -90,15 +89,3 @@ int set_cpu_clk_info(void)
gd->bd->bi_dsp_freq = 0;
return 0;
}
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_DRIVER_TI_EMAC)
- davinci_emac_initialize();
-#endif
- return 0;
-}
diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c
index c79e870183..fb0c9188f5 100644
--- a/arch/arm/mach-omap2/omap3/emac.c
+++ b/arch/arm/mach-omap2/omap3/emac.c
@@ -7,7 +7,6 @@
*/
#include <common.h>
-#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/am35x_def.h>
@@ -24,5 +23,5 @@ int cpu_eth_init(bd_t *bis)
reset &= ~CPGMACSS_SW_RST;
writel(reset, &am35x_scm_general_regs->ip_sw_reset);
- return davinci_emac_initialize();
+ return 0;
}
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 1bc26828bf..d090c00466 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -13,7 +13,6 @@
#include <environment.h>
#include <i2c.h>
#include <net.h>
-#include <netdev.h>
#include <spi.h>
#include <spi_flash.h>
#include <asm/arch/hardware.h>
@@ -472,11 +471,6 @@ int board_eth_init(bd_t *bis)
if (rmii_hw_init())
printf("RMII hardware init failed!!!\n");
#endif
- if (!davinci_emac_initialize()) {
- printf("Error: Ethernet init failed!\n");
- return -1;
- }
-
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC */
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 2c2f885d43..ef9656add8 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -11,7 +11,6 @@
#include <common.h>
#include <i2c.h>
#include <net.h>
-#include <netdev.h>
#include <spi.h>
#include <spi_flash.h>
#include <asm/arch/hardware.h>
@@ -229,19 +228,6 @@ int board_init(void)
#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
- if (!davinci_emac_initialize()) {
- printf("Error: Ethernet init failed!\n");
- return -1;
- }
-
- return 0;
-}
-
#endif /* CONFIG_DRIVER_TI_EMAC */
#define CFG_MAC_ADDR_SPI_BUS 0
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index 10031a4801..bfd4e78274 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -28,7 +28,6 @@
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
#include <i2c.h>
-#include <netdev.h>
#include "am3517evm.h"
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 07a084bab8..240df8cbe1 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -9,7 +9,6 @@
#include <common.h>
#include <environment.h>
#include <spl.h>
-#include <netdev.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
@@ -56,7 +55,7 @@ int board_eth_init(bd_t *bis)
printf("Unable to read MAC address. Set <ethaddr>\n");
}
- return davinci_emac_initialize();
+ return 0;
}
#ifdef CONFIG_SPL_BUILD
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index b9f59f3291..5cb76322df 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -44,6 +44,7 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_PINCTRL=y
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index 8c16d5c4f5..ca304ed78a 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -60,6 +60,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_PINCTRL=y
diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig
index 166e77b8e3..9b1da07384 100644
--- a/configs/da850evm_direct_nor_defconfig
+++ b/configs/da850evm_direct_nor_defconfig
@@ -50,6 +50,7 @@ CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_PINCTRL=y
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index b8eac0e659..eaf5d73dd8 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -60,6 +60,7 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_SERIAL=y
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index e43141844a..f93a06083e 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -50,6 +50,7 @@ CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_DM_SERIAL=y
diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig
index bf877f596b..b233ab8cc9 100644
--- a/configs/ti816x_evm_defconfig
+++ b/configs/ti816x_evm_defconfig
@@ -45,6 +45,7 @@ CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_SYS_NS16550=y
diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c
index 9d53984973..4b0a98a4aa 100644
--- a/drivers/net/ti/davinci_emac.c
+++ b/drivers/net/ti/davinci_emac.c
@@ -26,7 +26,6 @@
#include <net.h>
#include <miiphy.h>
#include <malloc.h>
-#include <netdev.h>
#include <linux/compiler.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
@@ -107,8 +106,9 @@ static u_int8_t num_phy;
phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
-static int davinci_eth_set_mac_addr(struct eth_device *dev)
+static int davinci_emac_write_hwaddr(struct udevice *dev)
{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
unsigned long mac_hi;
unsigned long mac_lo;
@@ -118,12 +118,12 @@ static int davinci_eth_set_mac_addr(struct eth_device *dev)
* Using channel 0 only - other channels are disabled
* */
writel(0, &adap_emac->MACINDEX);
- mac_hi = (dev->enetaddr[3] << 24) |
- (dev->enetaddr[2] << 16) |
- (dev->enetaddr[1] << 8) |
- (dev->enetaddr[0]);
- mac_lo = (dev->enetaddr[5] << 8) |
- (dev->enetaddr[4]);
+ mac_hi = (pdata->enetaddr[3] << 24) |
+ (pdata->enetaddr[2] << 16) |
+ (pdata->enetaddr[1] << 8) |
+ (pdata->enetaddr[0]);
+ mac_lo = (pdata->enetaddr[5] << 8) |
+ (pdata->enetaddr[4]);
writel(mac_hi, &adap_emac->MACADDRHI);
#if defined(DAVINCI_EMAC_VERSION2)
@@ -411,7 +411,7 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr)
}
/* Eth device open */
-static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
+static int davinci_emac_start(struct udevice *dev)
{
dv_reg_p addr;
u_int32_t clkdiv, cnt, mac_control;
@@ -447,7 +447,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
writel(1, &adap_emac->TXCONTROL);
writel(1, &adap_emac->RXCONTROL);
- davinci_eth_set_mac_addr(dev);
+ davinci_emac_write_hwaddr(dev);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
@@ -588,7 +588,7 @@ static void davinci_eth_ch_teardown(int ch)
}
/* Eth device close */
-static void davinci_eth_close(struct eth_device *dev)
+static void davinci_emac_stop(struct udevice *dev)
{
debug_emac("+ emac_close\n");
@@ -619,8 +619,8 @@ static int tx_send_loop = 0;
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
*/
-static int davinci_eth_send_packet (struct eth_device *dev,
- void *packet, int length)
+static int davinci_emac_send(struct udevice *dev,
+ void *packet, int length)
{
int ret_status = -1;
int index;
@@ -672,7 +672,7 @@ static int davinci_eth_send_packet (struct eth_device *dev,
/*
* This function handles receipt of a packet from the network
*/
-static int davinci_eth_rcv_packet (struct eth_device *dev)
+static int davinci_emac_recv(struct udevice *dev, int flags, uchar **packetp)
{
volatile emac_desc *rx_curr_desc;
volatile emac_desc *curr_desc;
@@ -742,6 +742,9 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
}
return (ret);
}
+
+ *packetp = rx_curr_desc->buffer;
+
return (0);
}
@@ -750,30 +753,12 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
* EMAC modules power or pin multiplexors, that is done by board_init()
* much earlier in bootup process. Returns 1 on success, 0 otherwise.
*/
-int davinci_emac_initialize(void)
+static int davinci_emac_probe(struct udevice *dev)
{
u_int32_t phy_id;
u_int16_t tmp;
int i;
int ret;
- struct eth_device *dev;
-
- dev = malloc(sizeof *dev);
-
- if (dev == NULL)
- return -1;
-
- memset(dev, 0, sizeof *dev);
- strcpy(dev->name, "DaVinci-EMAC");
-
- dev->iobase = 0;
- dev->init = davinci_eth_open;
- dev->halt = davinci_eth_close;
- dev->send = davinci_eth_send_packet;
- dev->recv = davinci_eth_rcv_packet;
- dev->write_hwaddr = davinci_eth_set_mac_addr;
-
- eth_register(dev);
davinci_eth_mdio_enable();
@@ -854,5 +839,29 @@ int davinci_emac_initialize(void)
phy[i].auto_negotiate(i);
}
#endif
- return(1);
+ return 0;
}
+
+static const struct eth_ops davinci_emac_ops = {
+ .start = davinci_emac_start,
+ .send = davinci_emac_send,
+ .recv = davinci_emac_recv,
+ .stop = davinci_emac_stop,
+ .write_hwaddr = davinci_emac_write_hwaddr,
+};
+
+static const struct udevice_id davinci_emac_ids[] = {
+ { .compatible = "ti,davinci-dm6467-emac" },
+ { .compatible = "ti,am3517-emac", },
+ { .compatible = "ti,dm816-emac", },
+ { }
+};
+
+U_BOOT_DRIVER(davinci_emac) = {
+ .name = "davinci_emac",
+ .id = UCLASS_ETH,
+ .of_match = davinci_emac_ids,
+ .probe = davinci_emac_probe,
+ .ops = &davinci_emac_ops,
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
diff --git a/include/netdev.h b/include/netdev.h
index 0a1a3a2d8d..a40c4adaad 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -30,7 +30,6 @@ int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
int bfin_EMAC_initialize(bd_t *bis);
int calxedaxgmac_initialize(u32 id, ulong base_addr);
int cs8900_initialize(u8 dev_num, int base_addr);
-int davinci_emac_initialize(void);
int dc21x4x_initialize(bd_t *bis);
int designware_initialize(ulong base_addr, u32 interface);
int dm9000_initialize(bd_t *bis);
--
2.21.0
More information about the U-Boot
mailing list