[U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate
Lukasz Majewski
lukma at denx.de
Wed May 8 07:40:09 UTC 2019
On Wed, 8 May 2019 06:51:46 +0000
Peng Fan <peng.fan at nxp.com> wrote:
> > -----Original Message-----
> > From: Lukasz Majewski [mailto:lukma at denx.de]
> > Sent: 2019年5月8日 14:46
> > To: Peng Fan <peng.fan at nxp.com>
> > Cc: sbabic at denx.de; festevam at gmail.com; dl-uboot-imx
> > <uboot-imx at nxp.com>; sjg at chromium.org; jagan at amarulasolutions.com;
> > sr at denx.de; u-boot at lists.denx.de; trini at konsulko.com
> > Subject: Re: [i.MX8MM+CCF 11/41] clk: fixed_rate: export
> > clk_fixed_rate
> >
> > On Tue, 7 May 2019 13:27:45 +0000
> > Peng Fan <peng.fan at nxp.com> wrote:
> >
> > > > Subject: Re: [i.MX8MM+CCF 11/41] clk: fixed_rate: export
> > > > clk_fixed_rate
> > > >
> > > > Hi Peng,
> > > >
> > > > > Export the structure for others to use.
> > > > >
> > > > > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > > > > ---
> > > > > drivers/clk/clk_fixed_rate.c | 8 +-------
> > > > > include/linux/clk-provider.h | 7 +++++++
> > > > > 2 files changed, 8 insertions(+), 7 deletions(-)
> > > > >
> > > > > diff --git a/drivers/clk/clk_fixed_rate.c
> > > > > b/drivers/clk/clk_fixed_rate.c index 089f060a23..069e643fbc
> > > > > 100644 --- a/drivers/clk/clk_fixed_rate.c
> > > > > +++ b/drivers/clk/clk_fixed_rate.c
> > > > > @@ -6,13 +6,7 @@
> > > > > #include <common.h>
> > > > > #include <clk-uclass.h>
> > > > > #include <dm.h>
> > > > > -
> > > > > -struct clk_fixed_rate {
> > > > > - struct clk clk;
> > > > > - unsigned long fixed_rate;
> > > > > -};
> > > > > -
> > > > > -#define to_clk_fixed_rate(dev) ((struct clk_fixed_rate
> > > > > *)dev_get_platdata(dev)) +#include <linux/clk-provider.h>
> > > > >
> > > > > static ulong clk_fixed_rate_get_rate(struct clk *clk) { diff
> > > > > --git a/include/linux/clk-provider.h
> > > > > b/include/linux/clk-provider.h index 3ed0db86d2..b2bed768b6
> > > > > 100644 --- a/include/linux/clk-provider.h
> > > > > +++ b/include/linux/clk-provider.h
> > > > > @@ -112,6 +112,13 @@ struct clk_fixed_factor { #define
> > > > > to_clk_fixed_factor(_clk) container_of(_clk, struct
> > > > > clk_fixed_factor,\ clk)
> > > > >
> > > > > +struct clk_fixed_rate {
> > > > > + struct clk clk;
> > > > > + unsigned long fixed_rate;
> > > > > +};
> > > >
> > > > I think that this struct shall stay where it was. Moreover, the
> > > > clk-provider.h is not the API to be used by other parts of the
> > > > clock API.
> > > >
> > > > The clk_fixed_rate shall be accessed via get_rate() only and in
> > > > IMX6Q it is available in early SPL (parsed from dts /clocks
> > > > property
> > > > - the 24MHz OSC)
> > > > > +
> > > > > +#define to_clk_fixed_rate(dev) ((struct clk_fixed_rate
> > > > > *)dev_get_platdata(dev)) +
> > > > > int clk_register(struct clk *clk, const char *drv_name,
> > > > > ulong drv_data, const char *name,
> > > > > const char *parent_name);
> > > >
> > > > Please explain why iMX8MM needs such global export?
> > >
> > > In clk-imx8mm.c, first configure ARM clk to osc24M fixed clk to
> > > change pll clock.
> > > + /* Configure ARM to osc24M */
> > > + clk_get_by_id(IMX8MM_CLK_A53_SRC, &clkp);
> > > + uclass_get_device_by_name(UCLASS_CLK, "clock-osc-24m",
> > &devp);
> > > + clkp1 = &to_clk_fixed_rate(devp)->clk;
> > > + clk_set_parent(clkp, clkp1);
> >
> > This code looks a bit strange to me. Why imx8mm sets parent here?
>
> The A53 clk could not change on the fly. There is a mux here, one is
> PLL, one is OSC, And there are others. If we want to change the pll
> clock which is currently being used by A53, we need first switch the
> A53 clk to source from OSC, then change pll clock, then switch A53
> clk back to PLL.
The above description looks like a "standard" procedure for bypassing
PLL when it is going to be locked.
The same is also performed on IMX6Q:
https://elixir.bootlin.com/linux/v5.1/source/drivers/clk/imx/clk-imx6q.c#L88
But I've not ported that part from the original Linux source code.
>
> >
> > In the imx6q I write "osc" as a part of the clock tree:
> >
> > clk_dm(IMX6QDL_CLK_PLL2,
> > imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc",
> > base + 0x30, 0x1));
> >
> > And here the parent is set as "osc".
> >
> > Moreover, the "osc" or in your case "clock-osc-24m" shall be
> > available in "clocks" DTS node and hence parsed / setup from there
> > (and be available in the clk uclass list).
> >
> > > +
> > > + /* Configure ARM PLL to 1.2GHz */
> > > + clk_get_by_id(IMX8MM_ARM_PLL, &clkp1);
> > > + clk_set_rate(clkp1, 1200000000UL);
> >
> > Shouldn't this be set in DTS ? As it is now - it seems like a
> > hardcoded value for early SPL clock setup. Am I right?
>
> You mean get freq from cpu opp and set cpu freq? I do not have good
> idea how to set in DTS.
I'm thinking about following description of the "osc" fixed clock:
https://elixir.bootlin.com/linux/v5.1/source/arch/arm/boot/dts/imx6qdl.dtsi#L64
and
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/dts/imx6qdl.dtsi;h=c0a94780087382a6e2805b7d6572f3e5e294e302;hb=HEAD#l53
The "fixed-clock" code has been adjusted to comply with the above DTS
(which is provided in pre-reloc SPL - even before console and ddr
setup).
(I had to use debug uart for debugging).
>
> Thanks,
> Peng.
>
> >
> > > + clk_get_by_id(IMX8MM_ARM_PLL_OUT, &clkp1);
> > > + clk_enable(clkp1);
> > > + clk_set_parent(clkp, clkp1);
> > > +
> > > + /* Configure DIV to 1.2GHz */
> > > + clk_get_by_id(IMX8MM_CLK_A53_DIV, &clkp1);
> > > + clk_set_rate(clkp1, 1200000000UL);
> > >
> > > Regards,
> > > Peng.
> > >
> > > >
> > > >
> > > > Best regards,
> > > >
> > > > Lukasz Majewski
> > > >
> > > > --
> > > >
> > > > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> > > > Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
> > > > (+49)-8142-66989-80 Email: lukma at denx.de
> >
> >
> >
> >
> > Best regards,
> >
> > Lukasz Majewski
> >
> > --
> >
> > DENX Software Engineering GmbH, Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190508/c8c9ec12/attachment.sig>
More information about the U-Boot
mailing list