[U-Boot] [PATCH] net: davinci_emac: use driver model (CONFIG_DM_ETH)
Bartosz Golaszewski
bgolaszewski at baylibre.com
Fri May 10 13:06:51 UTC 2019
pt., 10 maj 2019 o 14:51 Bartosz Golaszewski <brgl at bgdev.pl> napisał(a):
>
> pt., 10 maj 2019 o 14:31 Adam Ford <aford173 at gmail.com> napisał(a):
> >
> > On Fri, May 10, 2019 at 7:22 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
> > >
> > > czw., 9 maj 2019 o 20:48 Joe Hershberger <joe.hershberger at ni.com> napisał(a):
> > > >
> > > > On Tue, Apr 30, 2019 at 11:04 AM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
> > > > >
> > > > > From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> > > > >
> > > > > Add support for CONFIG_DM_ETH to the davinci_emac driver. Optimally
> > > > > we should only support DM-enabled platforms but there are several
> > > > > non-DT boards that still use it so either we need to keep supporting
> > > > > it or drop the boards from u-boot. For now we're stuck with ugly
> > > > > ifdefs.
> > > >
> > > > Which boards are still not using DM that you refer to here?
> > > >
> > >
> > > The following configs define CONFIG_DRIVER_TI_EMAC=y and don't define
> > > CONFIG_DM=y:
> > >
> > > am3517_evm_defconfig
> > > calimain_defconfig
> > > cm_t3517_defconfig
> > > ea20_defconfig
> > > eco5pk_defconfig
> > > ipam390_defconfig
> > > mcx_defconfig
> > > mt_ventoux_defconfig
> > > twister_defconfig
> > >
> > > Are these still maintained?
> >
> > I am still maintaining the am3517_evm. Config DM is being set for it.
> > The following are set in Kconfig:
> > select DM
> > select DM_GPIO
> > select DM_I2C
> > select DM_MMC
> > select DM_SERIAL
> > imply CMD_DM
> >
> > The last time I ran some spot checks the ethernet was working. I
> > haven't checked lately. Is there something you need me to check?
> >
>
> Ok, so I need to go through these and see if DM is not selected from
> Kconfig. I'm pretty sure there was at least one for which the build
> broke if I dropped the emac initialization function. Let me check...
>
Ok, confirmed that the following configs DO NOT select CONFIG_DM in any way:
calimain_defconfig
cm_t3517_defconfig
ea20_defconfig
eco5pk_defconfig
ipam390_defconfig
mcx_defconfig
mt_ventoux_defconfig
twister_defconfig
I Cc'ed some of the maintainers:
+ Manfred, Christoph, Igor, Sefano, Raphael, Heiko, Anatloij
Hi guys,
do you have any plans to add support for the driver model for these platforms?
Best regards,
Bartosz Golaszewski
> Bart
>
> > adam
> > >
> > > Best regards,
> > > Bartosz Golaszewski
> > >
> > > > >
> > > > > This patch adds support for driver-model to the driver and converts
> > > > > all platforms that use the driver model to selecting CONFIG_DM_ETH.
> > > > >
> > > > > Tested on da850-evm and da850-lcdk.
> > > > >
> > > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> > > > > ---
> > > > > NOTE: I'm currently working on modernizing da850 support in u-boot.
> > > > > This patch is just the first step - I plan on improving the emac driver
> > > > > in general but I'll be OoO until end of next week, so I decided to post
> > > > > it already for reviews.
> > > > >
> > > > > Does anyone know what the status is on boards like twister, ea20 etc.
> > > > > that use davinci_emac, but don't use the driver model? Dropping them
> > > > > would make it easier to clean up this driver.
> > > > >
> > > > > This patch applies on top of my previous series[1].
> > > > >
> > > > > [1] https://lists.denx.de/pipermail/u-boot/2019-April/367236.html
> > > > >
> > > > > arch/arm/mach-davinci/cpu.c | 13 ---
> > > > > arch/arm/mach-omap2/omap3/emac.c | 3 +-
> > > > > board/davinci/da8xxevm/da850evm.c | 5 --
> > > > > board/davinci/da8xxevm/omapl138_lcdk.c | 14 ----
> > > > > board/logicpd/am3517evm/am3517evm.c | 1 -
> > > > > board/ti/ti816x/evm.c | 3 +-
> > > > > configs/am3517_evm_defconfig | 1 +
> > > > > configs/da850_am18xxevm_defconfig | 1 +
> > > > > configs/da850evm_defconfig | 1 +
> > > > > configs/da850evm_direct_nor_defconfig | 1 +
> > > > > configs/omapl138_lcdk_defconfig | 1 +
> > > > > configs/ti816x_evm_defconfig | 1 +
> > > > > drivers/net/ti/davinci_emac.c | 109 +++++++++++++++++++++----
> > > > > 13 files changed, 100 insertions(+), 54 deletions(-)
> > > > >
> > > > > diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c
> > > > > index f97ad3fc74..9fd6564d04 100644
> > > > > --- a/arch/arm/mach-davinci/cpu.c
> > > > > +++ b/arch/arm/mach-davinci/cpu.c
> > > > > @@ -5,7 +5,6 @@
> > > > > */
> > > > >
> > > > > #include <common.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > #include <asm/io.h>
> > > > >
> > > > > @@ -90,15 +89,3 @@ int set_cpu_clk_info(void)
> > > > > gd->bd->bi_dsp_freq = 0;
> > > > > return 0;
> > > > > }
> > > > > -
> > > > > -/*
> > > > > - * Initializes on-chip ethernet controllers.
> > > > > - * to override, implement board_eth_init()
> > > > > - */
> > > > > -int cpu_eth_init(bd_t *bis)
> > > > > -{
> > > > > -#if defined(CONFIG_DRIVER_TI_EMAC)
> > > > > - davinci_emac_initialize();
> > > > > -#endif
> > > > > - return 0;
> > > > > -}
> > > > > diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c
> > > > > index c79e870183..fb0c9188f5 100644
> > > > > --- a/arch/arm/mach-omap2/omap3/emac.c
> > > > > +++ b/arch/arm/mach-omap2/omap3/emac.c
> > > > > @@ -7,7 +7,6 @@
> > > > > */
> > > > >
> > > > > #include <common.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/io.h>
> > > > > #include <asm/arch/am35x_def.h>
> > > > >
> > > > > @@ -24,5 +23,5 @@ int cpu_eth_init(bd_t *bis)
> > > > > reset &= ~CPGMACSS_SW_RST;
> > > > > writel(reset, &am35x_scm_general_regs->ip_sw_reset);
> > > > >
> > > > > - return davinci_emac_initialize();
> > > > > + return 0;
> > > > > }
> > > > > diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
> > > > > index 1bc26828bf..0d2bc5fb32 100644
> > > > > --- a/board/davinci/da8xxevm/da850evm.c
> > > > > +++ b/board/davinci/da8xxevm/da850evm.c
> > > > > @@ -13,7 +13,6 @@
> > > > > #include <environment.h>
> > > > > #include <i2c.h>
> > > > > #include <net.h>
> > > > > -#include <netdev.h>
> > > > > #include <spi.h>
> > > > > #include <spi_flash.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > @@ -472,10 +471,6 @@ int board_eth_init(bd_t *bis)
> > > > > if (rmii_hw_init())
> > > > > printf("RMII hardware init failed!!!\n");
> > > > > #endif
> > > > > - if (!davinci_emac_initialize()) {
> > > > > - printf("Error: Ethernet init failed!\n");
> > > > > - return -1;
> > > > > - }
> > > > >
> > > > > return 0;
> > > > > }
> > > > > diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > index 2c2f885d43..ef9656add8 100644
> > > > > --- a/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > +++ b/board/davinci/da8xxevm/omapl138_lcdk.c
> > > > > @@ -11,7 +11,6 @@
> > > > > #include <common.h>
> > > > > #include <i2c.h>
> > > > > #include <net.h>
> > > > > -#include <netdev.h>
> > > > > #include <spi.h>
> > > > > #include <spi_flash.h>
> > > > > #include <asm/arch/hardware.h>
> > > > > @@ -229,19 +228,6 @@ int board_init(void)
> > > > >
> > > > > #ifdef CONFIG_DRIVER_TI_EMAC
> > > > >
> > > > > -/*
> > > > > - * Initializes on-board ethernet controllers.
> > > > > - */
> > > > > -int board_eth_init(bd_t *bis)
> > > > > -{
> > > > > - if (!davinci_emac_initialize()) {
> > > > > - printf("Error: Ethernet init failed!\n");
> > > > > - return -1;
> > > > > - }
> > > > > -
> > > > > - return 0;
> > > > > -}
> > > > > -
> > > > > #endif /* CONFIG_DRIVER_TI_EMAC */
> > > > >
> > > > > #define CFG_MAC_ADDR_SPI_BUS 0
> > > > > diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
> > > > > index 10031a4801..bfd4e78274 100644
> > > > > --- a/board/logicpd/am3517evm/am3517evm.c
> > > > > +++ b/board/logicpd/am3517evm/am3517evm.c
> > > > > @@ -28,7 +28,6 @@
> > > > > #include <linux/usb/gadget.h>
> > > > > #include <linux/usb/musb.h>
> > > > > #include <i2c.h>
> > > > > -#include <netdev.h>
> > > > > #include "am3517evm.h"
> > > > >
> > > > > DECLARE_GLOBAL_DATA_PTR;
> > > > > diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
> > > > > index 07a084bab8..240df8cbe1 100644
> > > > > --- a/board/ti/ti816x/evm.c
> > > > > +++ b/board/ti/ti816x/evm.c
> > > > > @@ -9,7 +9,6 @@
> > > > > #include <common.h>
> > > > > #include <environment.h>
> > > > > #include <spl.h>
> > > > > -#include <netdev.h>
> > > > > #include <asm/cache.h>
> > > > > #include <asm/io.h>
> > > > > #include <asm/arch/clock.h>
> > > > > @@ -56,7 +55,7 @@ int board_eth_init(bd_t *bis)
> > > > > printf("Unable to read MAC address. Set <ethaddr>\n");
> > > > > }
> > > > >
> > > > > - return davinci_emac_initialize();
> > > > > + return 0;
> > > > > }
> > > > >
> > > > > #ifdef CONFIG_SPL_BUILD
> > > > > diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
> > > > > index b9f59f3291..0ea28a20b2 100644
> > > > > --- a/configs/am3517_evm_defconfig
> > > > > +++ b/configs/am3517_evm_defconfig
> > > > > @@ -45,6 +45,7 @@ CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
> > > > > CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
> > > > > CONFIG_SPL_NAND_SIMPLE=y
> > > > > CONFIG_MII=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > CONFIG_PINCTRL_SINGLE=y
> > > > > diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig
> > > > > index f098222113..6227cafc90 100644
> > > > > --- a/configs/da850_am18xxevm_defconfig
> > > > > +++ b/configs/da850_am18xxevm_defconfig
> > > > > @@ -52,6 +52,7 @@ CONFIG_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_MII=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_DM_SERIAL=y
> > > > > CONFIG_SYS_NS16550=y
> > > > > diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
> > > > > index 221c204af0..78eadc6330 100644
> > > > > --- a/configs/da850evm_defconfig
> > > > > +++ b/configs/da850evm_defconfig
> > > > > @@ -60,6 +60,7 @@ CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_SPI_FLASH_MTD=y
> > > > > CONFIG_MII=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > CONFIG_PINCTRL_SINGLE=y
> > > > > diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig
> > > > > index 166e77b8e3..2dd82d68b9 100644
> > > > > --- a/configs/da850evm_direct_nor_defconfig
> > > > > +++ b/configs/da850evm_direct_nor_defconfig
> > > > > @@ -51,6 +51,7 @@ CONFIG_SPI_FLASH=y
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_MII=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_PINCTRL=y
> > > > > CONFIG_PINCTRL_SINGLE=y
> > > > > diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
> > > > > index e43141844a..0600ac3f4a 100644
> > > > > --- a/configs/omapl138_lcdk_defconfig
> > > > > +++ b/configs/omapl138_lcdk_defconfig
> > > > > @@ -51,6 +51,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000
> > > > > CONFIG_SPI_FLASH_STMICRO=y
> > > > > CONFIG_SPI_FLASH_WINBOND=y
> > > > > CONFIG_MII=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_DM_SERIAL=y
> > > > > CONFIG_SYS_NS16550=y
> > > > > diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig
> > > > > index bf877f596b..131b25a188 100644
> > > > > --- a/configs/ti816x_evm_defconfig
> > > > > +++ b/configs/ti816x_evm_defconfig
> > > > > @@ -46,6 +46,7 @@ CONFIG_MMC_OMAP_HS=y
> > > > > CONFIG_NAND=y
> > > > > CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> > > > > CONFIG_MII=y
> > > > > +CONFIG_DM_ETH=y
> > > > > CONFIG_DRIVER_TI_EMAC=y
> > > > > CONFIG_SYS_NS16550=y
> > > > > CONFIG_SPI=y
> > > > > diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c
> > > > > index 9d53984973..3252a235d2 100644
> > > > > --- a/drivers/net/ti/davinci_emac.c
> > > > > +++ b/drivers/net/ti/davinci_emac.c
> > > > > @@ -26,11 +26,13 @@
> > > > > #include <net.h>
> > > > > #include <miiphy.h>
> > > > > #include <malloc.h>
> > > > > -#include <netdev.h>
> > > > > #include <linux/compiler.h>
> > > > > #include <asm/arch/emac_defs.h>
> > > > > #include <asm/io.h>
> > > > > #include "davinci_emac.h"
> > > > > +#ifndef CONFIG_DM_ETH
> > > > > +#include <netdev.h>
> > > > > +#endif
> > > > >
> > > > > unsigned int emac_dbg = 0;
> > > > > #define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
> > > > > @@ -107,10 +109,16 @@ static u_int8_t num_phy;
> > > > >
> > > > > phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
> > > > >
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > static int davinci_eth_set_mac_addr(struct eth_device *dev)
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > +static int davinci_emac_write_hwaddr(struct udevice *dev)
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > {
> > > > > - unsigned long mac_hi;
> > > > > - unsigned long mac_lo;
> > > > > +#ifdef CONFIG_DM_ETH
> > > > > + struct eth_pdata *pdata = dev_get_platdata(dev);
> > > > > +#endif
> > > > > + unsigned long mac_hi, mac_lo;
> > > > >
> > > > > /*
> > > > > * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
> > > > > @@ -118,12 +126,22 @@ static int davinci_eth_set_mac_addr(struct eth_device *dev)
> > > > > * Using channel 0 only - other channels are disabled
> > > > > * */
> > > > > writel(0, &adap_emac->MACINDEX);
> > > > > +
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > mac_hi = (dev->enetaddr[3] << 24) |
> > > > > (dev->enetaddr[2] << 16) |
> > > > > (dev->enetaddr[1] << 8) |
> > > > > (dev->enetaddr[0]);
> > > > > mac_lo = (dev->enetaddr[5] << 8) |
> > > > > (dev->enetaddr[4]);
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > + mac_hi = (pdata->enetaddr[3] << 24) |
> > > > > + (pdata->enetaddr[2] << 16) |
> > > > > + (pdata->enetaddr[1] << 8) |
> > > > > + (pdata->enetaddr[0]);
> > > > > + mac_lo = (pdata->enetaddr[5] << 8) |
> > > > > + (pdata->enetaddr[4]);
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > >
> > > > > writel(mac_hi, &adap_emac->MACADDRHI);
> > > > > #if defined(DAVINCI_EMAC_VERSION2)
> > > > > @@ -411,13 +429,17 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr)
> > > > > }
> > > > >
> > > > > /* Eth device open */
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > +static int davinci_emac_start(struct udevice *dev)
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > {
> > > > > - dv_reg_p addr;
> > > > > - u_int32_t clkdiv, cnt, mac_control;
> > > > > - uint16_t __maybe_unused lpa_val;
> > > > > - volatile emac_desc *rx_desc;
> > > > > - int index;
> > > > > + u32 clkdiv, cnt, mac_control;
> > > > > + volatile emac_desc *rx_desc;
> > > > > + u16 __maybe_unused lpa_val;
> > > > > + dv_reg_p addr;
> > > > > + int index;
> > > > >
> > > > > debug_emac("+ emac_open\n");
> > > > >
> > > > > @@ -447,7 +469,11 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
> > > > > writel(1, &adap_emac->TXCONTROL);
> > > > > writel(1, &adap_emac->RXCONTROL);
> > > > >
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > davinci_eth_set_mac_addr(dev);
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > + davinci_emac_write_hwaddr(dev);
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > >
> > > > > /* Set DMA 8 TX / 8 RX Head pointers to 0 */
> > > > > addr = &adap_emac->TX0HDP;
> > > > > @@ -588,7 +614,11 @@ static void davinci_eth_ch_teardown(int ch)
> > > > > }
> > > > >
> > > > > /* Eth device close */
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > static void davinci_eth_close(struct eth_device *dev)
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > +static void davinci_emac_stop(struct udevice *dev)
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > {
> > > > > debug_emac("+ emac_close\n");
> > > > >
> > > > > @@ -619,11 +649,15 @@ static int tx_send_loop = 0;
> > > > > * This function sends a single packet on the network and returns
> > > > > * positive number (number of bytes transmitted) or negative for error
> > > > > */
> > > > > -static int davinci_eth_send_packet (struct eth_device *dev,
> > > > > - void *packet, int length)
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > +static int davinci_eth_send_packet(struct eth_device *dev,
> > > > > + void *packet, int length)
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > +static int davinci_emac_send(struct udevice *dev,
> > > > > + void *packet, int length)
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > {
> > > > > - int ret_status = -1;
> > > > > - int index;
> > > > > + int ret_status = -1, index;
> > > >
> > > > I'm not sure why you are mixing these formatting changes (which look
> > > > bad anyway) with the substantive changes. Please drop them.
> > > >
> > > > > tx_send_loop = 0;
> > > > >
> > > > > index = get_active_phy();
> > > > > @@ -672,7 +706,11 @@ static int davinci_eth_send_packet (struct eth_device *dev,
> > > > > /*
> > > > > * This function handles receipt of a packet from the network
> > > > > */
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > +static int davinci_emac_recv(struct udevice *dev, int flags, uchar **packetp)
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > {
> > > > > volatile emac_desc *rx_curr_desc;
> > > > > volatile emac_desc *curr_desc;
> > > >
> > > > Please remove the call to net_process_received_packet() and split the
> > > > descriptor cleanup into a free_pkt() operation.
> > > >
> > > > > @@ -742,6 +780,9 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > }
> > > > > return (ret);
> > > > > }
> > > > > +#ifdef CONFIG_DM_ETH
> > > > > + *packetp = rx_curr_desc->buffer;
> > > > > +#endif
> > > > > return (0);
> > > > > }
> > > > >
> > > > > @@ -750,12 +791,16 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
> > > > > * EMAC modules power or pin multiplexors, that is done by board_init()
> > > > > * much earlier in bootup process. Returns 1 on success, 0 otherwise.
> > > > > */
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > int davinci_emac_initialize(void)
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > +static int davinci_emac_probe(struct udevice *dev)
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > {
> > > > > - u_int32_t phy_id;
> > > > > - u_int16_t tmp;
> > > > > - int i;
> > > > > - int ret;
> > > > > + int i, ret;
> > > > > + u32 phy_id;
> > > > > + u16 tmp;
> > > > > +#ifndef CONFIG_DM_ETH
> > > > > struct eth_device *dev;
> > > > >
> > > > > dev = malloc(sizeof *dev);
> > > > > @@ -774,6 +819,7 @@ int davinci_emac_initialize(void)
> > > > > dev->write_hwaddr = davinci_eth_set_mac_addr;
> > > > >
> > > > > eth_register(dev);
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > >
> > > > > davinci_eth_mdio_enable();
> > > > >
> > > > > @@ -854,5 +900,34 @@ int davinci_emac_initialize(void)
> > > > > phy[i].auto_negotiate(i);
> > > > > }
> > > > > #endif
> > > > > - return(1);
> > > > > +
> > > > > +#ifndef CONFIG_DM_ETH
> > > >
> > > > When you have both cases, please use positive logic. Flip the cases
> > > > and use #ifdef.
> > > >
> > > > > + return 1;
> > > > > +#else /* with CONFIG_DM_ETH */
> > > > > + return 0;
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > }
> > > > > +
> > > > > +#ifdef CONFIG_DM_ETH
> > > > > +static const struct eth_ops davinci_emac_ops = {
> > > > > + .start = davinci_emac_start,
> > > > > + .send = davinci_emac_send,
> > > > > + .recv = davinci_emac_recv,
> > > > > + .stop = davinci_emac_stop,
> > > > > + .write_hwaddr = davinci_emac_write_hwaddr,
> > > > > +};
> > > > > +
> > > > > +static const struct udevice_id davinci_emac_ids[] = {
> > > > > + { .compatible = "ti,davinci-dm6467-emac" },
> > > > > + { }
> > > > > +};
> > > > > +
> > > > > +U_BOOT_DRIVER(davinci_emac) = {
> > > > > + .name = "davinci_emac",
> > > > > + .id = UCLASS_ETH,
> > > > > + .of_match = davinci_emac_ids,
> > > > > + .probe = davinci_emac_probe,
> > > > > + .ops = &davinci_emac_ops,
> > > > > + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> > > > > +};
> > > > > +#endif /* CONFIG_DM_ETH */
> > > > > --
> > > > > 2.21.0
> > > > >
> > > > > _______________________________________________
> > > > > U-Boot mailing list
> > > > > U-Boot at lists.denx.de
> > > > > https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list