[U-Boot] [PATCH v2 2/2] ARM: davinci: SPL: fix BSS initialization

[Adam Ford]

On Wed, May 29, 2019 at 8:13 AM Sekhar Nori <nsekhar at ti.com> wrote:
>
> On 28/05/19 8:44 PM, Adam Ford wrote:
> >> -void spl_board_init(void)
> >> +void board_init_f(ulong dummy)
> >>  {
>
> > The da850 uses the device tree to get the serial port information, and
> > someone else just submitted a patch to enable the device tree for the
> > LCDK.  At least for the da850-evm, we need to initialize the spl stuff
> > here to fetch the device tree info in order to enable the serial port
> > for preload_console_init() or it hangs.
> >
> > I think we should add spl_early_init(); If you don't want it enabled
> > all the time, we could encapsulate it in an ifdef checking for the
> > presence of OF_CONTROL, but I think it should be harmless to have it
> > executed all the time based on my interpretation of the readme file.
>
> I added it in my branch:
>
> http://git.ti.com/cgit/cgit.cgi/~dmurphy/ti-u-boot/nsekhar-ti-u-boot.git/log/?h=omapl138-mmc-boot
>
> It works well on my LCDK for MMC boot. Can you please check it on DA850
> EVM and then I will submit to mailing list.

Looks find to me.  Go ahead and add

Tested-by: Adam Ford <aford173 at gmail.com> #da850evm

>
> Thanks,
> Sekhar