[U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board

[Simon Goldschmidt]

Wolfgang Grandegger <wg at aries-embedded.de> schrieb am Mi., 8. Mai 2019,
12:23:

> Hello,
>
> Am 07.05.19 um 21:25 schrieb Simon Goldschmidt:
> >
> >
> > On 07.05.19 21:14, Wolfgang Grandegger wrote:
> >>
> >> Am 07.05.19 um 13:37 schrieb Simon Goldschmidt:
> >>> On Tue, May 7, 2019 at 9:41 AM Wolfgang Grandegger
> >>> <wg at aries-embedded.de> wrote:
> >>>>
> >>>>
> >>>>
> >>>> Am 06.05.19 um 22:16 schrieb Simon Goldschmidt:
> >>>>> Am 06.05.2019 um 17:45 schrieb Wolfgang Grandegger:
> >>>>>> Re-add support for Aries Embedded MCV SoM, which is CycloneV based
> >>>>>> and the associated MCVEVK baseboard. The board can boot from eMMC.
> >>>>>> Ethernet and USB is supported.
> >>>>>>
> >>>>>> The Aries Embedded boards have been removed with commit 03b54997d568
> >>>>>> ("board/aries: Remove"). I will now take care of them.
> >>>>>>
> >>>>>> Signed-off-by: Wolfgang Grandegger <wg at aries-embedded.de>
> >>>>>> CC: Marek Vasut <marex at denx.de>
> >>>>>> CC: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> >>>>>> ---
> >>>>>>    .travis.yml                                      |   2 +-
> >>>>>>    arch/arm/dts/Makefile                            |   1 +
> >>>>>>    arch/arm/dts/socfpga_cyclone5_mcv.dtsi           |  22 +
> >>>>>>    arch/arm/dts/socfpga_cyclone5_mcvevk-u-boot.dtsi |  38 ++
> >>>>>>    arch/arm/dts/socfpga_cyclone5_mcvevk.dts         |  81 +++
> >>>>>>    arch/arm/mach-socfpga/Kconfig                    |   7 +
> >>>>>>    board/aries/mcvevk/MAINTAINERS                   |   6 +
> >>>>>>    board/aries/mcvevk/Makefile                      |   7 +
> >>>>>>    board/aries/mcvevk/qts/iocsr_config.h            | 659
> >>>>>> +++++++++++++++++++++++
> >>>>>>    board/aries/mcvevk/qts/pinmux_config.h           | 218 ++++++++
> >>>>>>    board/aries/mcvevk/qts/pll_config.h              |  84 +++
> >>>>>>    board/aries/mcvevk/qts/sdram_config.h            | 343
> >>>>>> ++++++++++++
> >>>>>
> >>>>> These files are always a mystery. Would you be able to provide
> >>>>> (long-lived) link to a simplistic quartus project so that everyone
> can
> >>>>> regenerate these?
> >>>>>
> >>>>> I'll try to provide such a quartus project for the socrates board,
> and
> >>>>> I'd be very happy if the original Intel dev boards could do so as
> >>>>> well!
> >>>>
> >>>> There is a Quartus example project for that module/board here:
> >>>>
> >>>>    https://github.com/ARIES-Embedded/mcv
> >>>
> >>> Cool. And is this a permanent link that we could add to some kind
> >>> of documentation for this board in the U-Boot sources? That would
> >>> ensure U-Boot maintainers can find it in the future...
> >>
> >> I will check with the author!
> >>
> >> BTW: My patch works fine on top of v2019.04 but the boot hangs without
> >> console output with the latest HEAD. The problems start with commit:
> >>
> >>    ede6e7b reset: socfpga: add reset handling for old kernels
> >>
> >> Then I get:
> >>
> >>    U-Boot SPL 2019.04-00508-g03b5c7e-dirty (May 07 2019 - 21:03:52
> +0200)
> >>    ### ERROR ### Please RESET the board ###
> >>
> >> Any idea how to fix that?
> >
> > No, sorry, I don't have an idea right now. Are you sure you're not
> > missing any of the "u-boot,dm-pre-reloc" tags?
> >
> > And you're absolutely sure this very commit produces this error?
>
> Well, I somehow fooled myself. Sorry for the noise. The problem was the
> missing "u-boot,dm-pre-reloc" for the "rst" odr "sdr" node and
> "CONFIG_SPL_TEXT_BASE=0xFFFF0000" in the defconfig. Now U-Boot starts
> but the kernel does not...
>

Good to know U-Boot works. What's the output of the kernel? Have you added
the env variable the above mentioned commit checks? Without it, all
peripherals are out into reset and have to be re-enabled by Linux drivers...

But this variable should be added by socfpga_common.h

Regards,
Simon

>