[U-Boot] [PATCH 4/4] omapl138_lcdk_defconfig: don't build support for SPI

Bartosz Golaszewski brgl at bgdev.pl
Mon May 27 08:57:21 UTC 2019


From: Bartosz Golaszewski <bgolaszewski at baylibre.com>

The following warning is emited when building u-boot for da850-lcdk:

===================== WARNING ======================
This board does not use CONFIG_DM_SPI. Please update
the board before v2019.04 for no dm conversion
and v2019.07 for partially dm converted drivers.
Failure to update can lead to driver/board removal
See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

While we could fix it by selecting CONFIG_DM_SPI, there's no need to
build it at all as SPI is disabled on da850-lcdk. Remove all unneeded
options from the defconfig.

Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
 configs/omapl138_lcdk_defconfig | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index b03d8160af..1c232b47f3 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -27,6 +27,7 @@ CONFIG_CRC32_VERIFY=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_GPIO is not set
 CONFIG_CMD_NAND=y
+# CONFIG_CMD_SPI is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_DIAG=y
@@ -45,13 +46,8 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
 CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_MII=y
 CONFIG_DRIVER_TI_EMAC=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DAVINCI_SPI=y
-- 
2.21.0



More information about the U-Boot mailing list