[U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF
Lukasz Majewski
lukma at denx.de
Mon May 6 21:32:08 UTC 2019
Hi Peng,
> This patch set is based Lukasz V3 CCF patchset,
> [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to
> U-boot (tag: 5.0-rc3)
> https://github.com/lmajewski/u-boot-dfu/commits/CCF-v3
>
> Added a few fixes to Lukasz's v3 patchset.
> Introduced clk-gate/composite
> Added set rate support
> Per my understanding, U-Boot CCF will not support mux reparent, and
> support rate prograte setting to parent automatically.
I think that we shall keep the code as small as possible and hence add
only necessary features (that is why my code only supports gating and
muxing for 'downstream' settings).
> So new clk
> feature added follow this rule.
>
> There are many warnings when importing linux ccf code, I did not
> modify them all.
I've removed some not needed arguments (like spinlocks) when porting
the code.
>
> The rest patches are for i.MX8MM, part of legacy clk code are still
> kept, because we are hard to enable CCF at very early stage,
Yes, CCF in SPL is a challenging task.
> we set
> malloc space to DRAM when dram initialized in spl stage, so we have
> limited SRAM for uclass dm and dm clk,
I'm puzzled about this sentence. The malloc is set to be in DRAM, but
also SRAM is used for uclass dm and CCF.
As fair as I remember on iMX6Q it is possible to setup early malloc to
be in SRAM (OCRAM). Having it in DRAM is a bit late, IMHO as clocks
are already setup in this moment.
> so keep the DRAM PLL related
> setting with legacy clk code which use small ram.
What is the 'ram' ? I suppose that the legacy clk code uses OCRAM to
allocate variables ?
>
> The u-boot-spl.bin now is about 100KB without ddr firmware,usb stack
> and hab, so really large......
I think that 100KiB is too much (without DDR, USB stack and HAB). For
one IMX6Q setup (before DM/DTS conversion) I had SPL size ~30 KiB.
After the conversion it is 55 KiB ...
> I am thinking what we could do to shrink the size, welcome any
> suggestions.
Please consider using:
- TINY_PRINTF
- TINY_FIT support (just support for single image in FIT)
- OF_PLATDATA (the in-device-tree code is compiled in as C
structures) - no need to include DTS parsing / handling code in SPL.
Also the *.dts file is not needed.
Drawback is that you need to extend drivers to support OF_PLATDATA
(RK3399 have some examples of such approach).
- Check if thumb2 is uses for SPL compilation
- I simply do find *.o files and sort them regarding the size. Then I
do know where to start with optimisations.
>
> Not expect this patchset could be merged, because of the CCF/clock
> code change, but since the clock part blocks i.MX8MM upstream, just
> would like to speed up the development with community and move on.
>
> Peng Fan (40):
> clk: correct get clk_x pointer
> clk: fixed-factor: fix get clk_fixed_factor
> clk: introduce clk_dev_binded
> clk: use clk_dev_binded
> clk-provider: sync more clk flags from Linux Kernel
> cmd: clk: print err value when clk_get_rate failed
> clk: mux: add set parent support
> clk: export mux/divider ops
> clk: add clk-gate support
> divider set rate supporrt
> clk: fixed_rate: export clk_fixed_rate
> clk: fixed_rate: add pre reloc flag
> clk: imx: import clk heplers
> clk: imx: gate2 add set rate
> linux: compat: guard PAGE_SIZE
> drivers: core: use strcmp when find device by name
> ddr: imx8m: fix ddr firmware location when enable SPL OF
> imx: add IMX8MQ kconfig entry
> imx: add IMX8MM kconfig entry
> imx: imx8mm: add clock bindings header
> imx: add i.MX8MM cpu type
> imx: spl: add spl_board_boot_device for i.MX8MM
> imx8m: update imx-regs for i.MX8MM
> imx: add get_cpu_rev support for i.MX8MM
> imx8m: rename clock to clock_imx8mq
> imx8m: restructure clock.h
> imx8m: add clk support for i.MX8MM
> imx8m: soc: probe clk before relocation
> imx8m: add pin header for i.MX8MM
> imx: add i.MX8MM PE property
> imx8m: Fix MMU table issue for OPTEE memory
> imx8m: set BYPASS ID SWAP to avoid AXI bus errors
> imx8m: soc: enable SCTR clock before timer init
> serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
> clk: imx: add Kconfig entry for i.MX8MM
> clk: imx: add pll14xx driver
> clk: add composite clk support
> clk: imx: add i.MX8MM composite clk support
> clk: imx: add i.MX8MM clk driver
> imx: add i.MX8MM EVK board support
>
> Ye Li (1):
> imx8m: Configure trustzone region 0 for non-secure access
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
> arch/arm/dts/imx8mm-evk.dts | 235 +++
> arch/arm/dts/imx8mm-pinfunc.h | 629 +++++++
> arch/arm/dts/imx8mm.dtsi | 733 ++++++++
> arch/arm/include/asm/arch-imx/cpu.h | 6 +
> arch/arm/include/asm/arch-imx8m/clock.h | 493 +----
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 387 ++++
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424 +++++
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +-
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691 +++++++
> arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
> arch/arm/include/asm/mach-imx/sys_proto.h | 8 +
> arch/arm/mach-imx/cpu.c | 12 +
> arch/arm/mach-imx/imx8m/Kconfig | 17 +-
> arch/arm/mach-imx/imx8m/Makefile | 4 +-
> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 292 +++
> .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 5 +-
> arch/arm/mach-imx/imx8m/clock_slice.c | 461 +++++
> arch/arm/mach-imx/imx8m/soc.c | 112 +-
> arch/arm/mach-imx/spl.c | 8 +
> board/freescale/imx8mm_evk/Kconfig | 12 +
> board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> board/freescale/imx8mm_evk/Makefile | 12 +
> board/freescale/imx8mm_evk/imx8mm_evk.c | 90 +
> board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> ++++++++++++++++++++
> board/freescale/imx8mm_evk/spl.c | 216 +++
> cmd/clk.c | 2 +
> configs/imx8mm_evk_defconfig | 52 +
> drivers/clk/Kconfig | 14 +
> drivers/clk/Makefile | 3 +-
> drivers/clk/clk-composite.c | 165 ++
> drivers/clk/clk-divider.c | 92 +-
> drivers/clk/clk-fixed-factor.c | 2 +-
> drivers/clk/clk-gate.c | 151 ++
> drivers/clk/clk-mux.c | 76 +-
> drivers/clk/clk.c | 8 +
> drivers/clk/clk_fixed_rate.c | 9 +-
> drivers/clk/imx/Kconfig | 9 +
> drivers/clk/imx/Makefile | 1 +
> drivers/clk/imx/clk-composite-8m.c | 170 ++
> drivers/clk/imx/clk-gate2.c | 15 +-
> drivers/clk/imx/clk-imx8mm.c | 415 ++++
> drivers/clk/imx/clk-pfd.c | 2 +-
> drivers/clk/imx/clk-pll14xx.c | 377 ++++
> drivers/clk/imx/clk-pllv3.c | 2 +-
> drivers/clk/imx/clk.h | 106 ++
> drivers/core/uclass.c | 2 +-
> drivers/ddr/imx/imx8m/helper.c | 12 +-
> drivers/serial/Kconfig | 2 +-
> include/clk.h | 9 +
> include/configs/imx8mm_evk.h | 199 ++
> include/dt-bindings/clock/imx8mm-clock.h | 244 +++
> include/linux/clk-provider.h | 74 +
> include/linux/compat.h | 2 + 55 files
> changed, 8728 insertions(+), 494 deletions(-) create mode 100644
> arch/arm/dts/imx8mm-evk-u-boot.dtsi create mode 100644
> arch/arm/dts/imx8mm-evk.dts create mode 100644
> arch/arm/dts/imx8mm-pinfunc.h create mode 100644
> arch/arm/dts/imx8mm.dtsi create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h create mode 100644
> arch/arm/mach-imx/imx8m/clock_imx8mm.c rename
> arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%) create mode
> 100644 board/freescale/imx8mm_evk/Kconfig create mode 100644
> board/freescale/imx8mm_evk/MAINTAINERS create mode 100644
> board/freescale/imx8mm_evk/Makefile create mode 100644
> board/freescale/imx8mm_evk/imx8mm_evk.c create mode 100644
> board/freescale/imx8mm_evk/lpddr4_timing.c create mode 100644
> board/freescale/imx8mm_evk/spl.c create mode 100644
> configs/imx8mm_evk_defconfig create mode 100644
> drivers/clk/clk-composite.c create mode 100644 drivers/clk/clk-gate.c
> create mode 100644 drivers/clk/imx/clk-composite-8m.c
> create mode 100644 drivers/clk/imx/clk-imx8mm.c
> create mode 100644 drivers/clk/imx/clk-pll14xx.c
> create mode 100644 include/configs/imx8mm_evk.h
> create mode 100644 include/dt-bindings/clock/imx8mm-clock.h
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190506/6668a266/attachment.sig>
More information about the U-Boot
mailing list