[U-Boot] [PATCH] configs: ls1088aqds: Enable config to write aligned data to TxFIFO

[Kuldeep Singh]

Enable config in LS1088aqds board to send only 16 bytes aligned data to
TxFIFO while writing to flash

Signed-off-by: Kuldeep Singh <kuldeep.singh at nxp.com>
---
 configs/ls1088aqds_tfa_defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index 863d9c3361..8921231132 100644
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -17,7 +17,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_SPI_FLASH_BAR is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
@@ -45,6 +44,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_SPANSION=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_E1000=y
@@ -57,6 +57,7 @@ CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_FSL_SPI_ALIGNED_TXFIFO=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
-- 
2.17.1