[U-Boot] [PATCH 3/3] rockchip: clk: rk3399: allow requests for all UART clocks

[Kever Yang]

On 05/07/2019 04:58 PM, Christoph Muellner wrote:
> This patch adds the rate for UART1 and UART3 the same way
> as already implemented for UART0 and UART2.
>
> This is required for boards, which have their console output
> on these UARTs.
>
> Signed-off-by: Christoph Muellner <christoph.muellner at theobroma-systems.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>
>  drivers/clk/rockchip/clk_rk3399.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
> index 93a652e5ff..aa6a8ad1c9 100644
> --- a/drivers/clk/rockchip/clk_rk3399.c
> +++ b/drivers/clk/rockchip/clk_rk3399.c
> @@ -912,7 +912,9 @@ static ulong rk3399_clk_get_rate(struct clk *clk)
>  		rate = rk3399_spi_get_clk(priv->cru, clk->id);
>  		break;
>  	case SCLK_UART0:
> +	case SCLK_UART1:
>  	case SCLK_UART2:
> +	case SCLK_UART3:
>  		return 24000000;
>  		break;
>  	case PCLK_HDMI_CTRL: