[U-Boot] [PATCH v2 1/8] drivers/pci : enable pcie_layerscape code for lx2-rev2

[Wasim Khan]

lx2-rev1 uses pcie_layerscape_gen4 driver and lx2-rev2 uses
pcie_layerscape driver.
Enable pcie_layerscape code for CONFIG_PCIE_LAYERSCAPE_GEN4.
Based on SoC and revision pcie controller probe will be invoked.

Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
---

Changes in v2:
 Updated patch subject and description based on Priyanka Jain
 review comments

 drivers/pci/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index b1d3dc8..d6a9b8c 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_PCIE_FSL) += pcie_fsl.o pcie_fsl_fixup.o
 obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
 obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape_fixup.o
 obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie_layerscape_gen4.o \
-				pcie_layerscape_gen4_fixup.o
+				pcie_layerscape_gen4_fixup.o pcie_layerscape.o
 obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o
 obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o
 obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o
-- 
2.7.4