November 2019 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Nov 1 03:03:15 UTC 2019
Ending: Sat Nov 30 22:01:15 UTC 2019
Messages: 3347

• [U-Boot] [PATCH] thermal: ti-bandgap: Fix adc value datatype   Faiz Abbas
• [U-Boot] [PATCH] net: cpsw: Add NULL pointer check   Faiz Abbas
• [U-Boot] [PATCH] regmap: Fix potential memory leaks   Faiz Abbas
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Faiz Abbas
• [U-Boot] [PATCH 0/8] Add Support for MMC/SD in J721e   Faiz Abbas
• [U-Boot] [PATCH 1/8] mmc: am654_sdhci: Get Xin clock by name   Faiz Abbas
• [U-Boot] [PATCH 2/8] mmc: am654_sdhci: Add Support for configuring PHY in J721e   Faiz Abbas
• [U-Boot] [PATCH 3/8] arm: dts: k3-j721e-common-proc-board: Remove voltage-ranges from sdhci nodes   Faiz Abbas
• [U-Boot] [PATCH 4/8] arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card   Faiz Abbas
• [U-Boot] [PATCH 5/8] configs: j721e_evm: Add configs for ADMA Support   Faiz Abbas
• [U-Boot] [PATCH 6/8] configs: j721e_evm_a72: Enable FAT_WRITE   Faiz Abbas
• [U-Boot] [PATCH 7/8] configs: j721e_evm_a72: Add Support for GPT partitions   Faiz Abbas
• [U-Boot] [PATCH 8/8] configs: j721e_evm_r5: Add configs for environment in eMMC   Faiz Abbas
• [U-Boot] [PATCH] configs: am65x_evm: Add Support for ADMA   Faiz Abbas
• [U-Boot] [RFC/RFT U-Boot PATCH] image: Add Image.gz parsing support in booti.   David Abdurachmanov
• [U-Boot] [PATCH] include/env.h: Ensure ulong is defined   David Abdurachmanov
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   David Abdurachmanov
• [U-Boot] [PATCH v2 1/2] freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name.   Udit Agarwal
• [U-Boot] [PATCH v2 2/2] freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name.   Udit Agarwal
• [U-Boot] [PATCH v3] Add TFA secure boot defconfig and Enables secure boot related configs in it.   Udit Agarwal
• [U-Boot] [PATCH v3 1/2] setexpr command is used while running secure boot (chain of trust with confidentiality) feature.   Udit Agarwal
• [U-Boot] [PATCH v3 2/2] Maximum size of secure boot header to be read from MMC is 12KB which spans across 0x20 blocks.   Udit Agarwal
• [U-Boot] [PATCH v4] configs/ls1046afrwy: Add TFA secure boot defconfig   Udit Agarwal
• [U-Boot] [PATCH v4] board/freescale/ls1028a: Secure boot: Adds sec_init call   Udit Agarwal
• [U-Boot] [Patch v4 2/2] armv8: fsl-layerscape: Increase mmc read size for secure-boot headers   Udit Agarwal
• [U-Boot] [Patch v4 1/2] configs: fsl-layerscape: secure_boot: Enable setexpr command   Udit Agarwal
• [U-Boot] [PATCH v1 2/2] MAINTAINERS: change colibri_imx6/imx6ull/t30/vf maintainers   Stefan Agner
• [U-Boot] [PATCH v2 00/10] RISC-V AX25-AE350 support SPL   Andes
• [U-Boot] [PATCH v2 01/10] riscv: ax25: add SPL support   Andes
• [U-Boot] [PATCH v2 02/10] riscv: ax25-ae350: add SPL configuration   Andes
• [U-Boot] [PATCH v2 03/10] riscv: ax25-ae350: Use generic memory size setup   Andes
• [U-Boot] [PATCH v2 04/10] riscv: andes_plic: Fix some wrong configurations   Andes
• [U-Boot] [PATCH v2 05/10] riscv: ax25: cache: Add SPL_RISCV_MMODE for SPL   Andes
• [U-Boot] [PATCH v2 06/10] spl: cache: Allow cache drivers in SPL   Andes
• [U-Boot] [PATCH v2 07/10] riscv: Fix clear bss loop in the start-up code   Andes
• [U-Boot] [PATCH v2 08/10] riscv: dts: Support four cores SMP   Andes
• [U-Boot] [PATCH v2 09/10] riscv: dts: Add #address-cells and #size-cells in nor node   Andes
• [U-Boot] [PATCH v2 10/10] doc: update AX25-AE350 RISC-V documentation   Andes
• [U-Boot] [PATCH v2 03/16] efi_loader: add signature verification functions   Ilias Apalodimas
• [U-Boot] [PATCH v2 00/16] efi_loader: add secure boot support   Ilias Apalodimas
• [U-Boot] [PATCH v2 04/16] efi_loader: add signature database parser   Ilias Apalodimas
• [U-Boot] [PATCH v2 04/16] efi_loader: add signature database parser   Ilias Apalodimas
• [U-Boot] [PATCH 4/4] board: amlogic: Add missing config option   Neil Armstrong
• [U-Boot] [PATCH 3/4] board: amlogic: select PWRSEQ for all amlogic platform   Neil Armstrong
• [U-Boot] [PATCH 2/4] configs: meson64: enable GIC support for G12A/G12B   Neil Armstrong
• [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process   Neil Armstrong
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Auer, Lukas
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Auer, Lukas
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Auer, Lukas
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Auer, Lukas
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Auer, Lukas
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Auer, Lukas
• [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP   Stefano Babic
• [U-Boot] [PATCH v2 3/5] imx: nandbcb: add support for i.MX7   Stefano Babic
• [U-Boot] [PATCH] tbs2910: Disable Plan9/RTEMS bootm support   Stefano Babic
• [U-Boot] [PATCH 1/1] ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'   Stefano Babic
• [U-Boot] [PATCH V4 5/6] net: fec_mxc: support i.MX8M with CLK_CCF   Stefano Babic
• [U-Boot] [PATCH] imx: update i.MX8MQ device trees   Stefano Babic
• [U-Boot] [PATCH v5 0/2] Add board support for iMX8QXP AI_ML board   Stefano Babic
• [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP   Stefano Babic
• [U-Boot] [PATCH v3 1/2] ARM: dts: imx6ull-colibri: change hierarchy of DTS files   Stefano Babic
• [U-Boot] [PATCH v3 1/2] ARM: dts: imx6ull-colibri: change hierarchy of DTS files   Stefano Babic
• [U-Boot] [PATCH v3] board/BuR/brppt2: initial commit   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191104   Stefano Babic
• [U-Boot] [PATCH v2] mx6: Allow configuring the NoC registers on i.MX6QP   Stefano Babic
• [U-Boot] [PATCH v5 0/2] Add board support for iMX8QXP AI_ML board   Stefano Babic
• [U-Boot] [PATCH] imx: sys_proto: Fixing function imx6_is_bmode_from_gpr9()   Stefano Babic
• [U-Boot] [PATCH] imx: sys_proto: Fixing function imx6_is_bmode_from_gpr9()   Stefano Babic
• [U-Boot] [PATCH] imx: sys_proto: Fixing function imx6_is_bmode_from_gpr9()   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191105   Stefano Babic
• [U-Boot] [PATCH] warp7: Fix U-Boot corruption after saving the environment   Stefano Babic
• [U-Boot] [PATCH] drivers: pci: layerscape: Add EP compatible as CONFIG   Pankaj Bansal
• [U-Boot] [PATCH v2] armv8: layerscape: Manage PCIe EP compatible string via Kconfig   Pankaj Bansal
• [U-Boot] [PATCH] board: fsl: lx2160a: Fix the typo in board_fix_fdt   Pankaj Bansal
• [U-Boot] [PATCH v2 1/2] pci: layerscape: move PCIE related CONFIG to PCI Kconfig   Pankaj Bansal
• [U-Boot] [PATCH v2 2/2] pci: layerscape: Manage PCIe EP compatible string via Kconfig   Pankaj Bansal
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a and ls2080a EP mode   Xiaowei Bao
• [U-Boot] [PATCH 2/3] PCI: layerscape: Add the configuration for PF1 and VFs   Xiaowei Bao
• [U-Boot] [PATCH 3/3] PCI: layerscape: Add the PCIe EP mode support for lx2160a-v2   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [RESEND PATCH 00/10] GE boards initial DM conversion   Robert Beckett
• [U-Boot] [RESEND PATCH 01/10] board: ge: bx50v3: sync devicetrees from Linux   Robert Beckett
• [U-Boot] [RESEND PATCH 02/10] board: ge: ppd: sync device tree from Linux   Robert Beckett
• [U-Boot] [RESEND PATCH 03/10] configs: bx50v3: Fix boot hang with video   Robert Beckett
• [U-Boot] [RESEND PATCH 04/10] board: ge: bx50v3: Fix run-time warning   Robert Beckett
• [U-Boot] [RESEND PATCH 05/10] board: ge: bx50v3: Fix message output to video console   Robert Beckett
• [U-Boot] [RESEND PATCH 06/10] configs: ppd: DM for USB and regulators PPD   Robert Beckett
• [U-Boot] [RESEND PATCH 07/10] board: ge: bx50v3: Enable DM for PCI and ethernet   Robert Beckett
• [U-Boot] [RESEND PATCH 08/10] board: ge: pass rtc_status via device tree   Robert Beckett
• [U-Boot] [RESEND PATCH 09/10] board: ge: bx50v3: use imx wdt   Robert Beckett
• [U-Boot] [RESEND PATCH 10/10] board: ge: mx53ppd: use imx wdt   Robert Beckett
• [U-Boot] [PATCH] patman: fix coverletter cc list with nulls   Robert Beckett
• [U-Boot] [RFC PATCH 0/5] WIP Add support for i.MXRT family   Giulio Benetti
• [U-Boot] [RFC PATCH 5/5] Add support for the NXP IMXRT1050-EVK board   Giulio Benetti
• [U-Boot] [RFC PATCH 4/5] ram: add SDRAM driver for i.MXRT SoCs   Giulio Benetti
• [U-Boot] Add support for imxrt   Giulio Benetti
• [U-Boot] [RFC PATCH v2 00/18] WIP Add support for i.MXRT family   Giulio Benetti
• [U-Boot] [RFC PATCH v2 01/18] imx: Add basic support for the NXP IMXRT10xx SoC family   Giulio Benetti
• [U-Boot] [RFC PATCH v2 02/18] clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocks   Giulio Benetti
• [U-Boot] [RFC PATCH v2 03/18] clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USB   Giulio Benetti
• [U-Boot] [RFC PATCH v2 04/18] clk: imx: pllv3: add enable() support   Giulio Benetti
• [U-Boot] [RFC PATCH v2 05/18] clk: imx: pllv3: add disable() support   Giulio Benetti
• [U-Boot] [RFC PATCH v2 06/18] clk: imx: pllv3: add set_rate() support   Giulio Benetti
• [U-Boot] [RFC PATCH v2 07/18] clk: imx: pllv3: add PLLV3_SYS support   Giulio Benetti
• [U-Boot] [RFC PATCH v2 08/18] clk: imx: add i.IMXRT clk driver   Giulio Benetti
• [U-Boot] [RFC PATCH v2 09/18] pinctrl: add i.MXRT driver   Giulio Benetti
• [U-Boot] [RFC PATCH v2 10/18] serial_lpuart: add clock enable if CONFIG_CLK is defined   Giulio Benetti
• [U-Boot] [RFC PATCH v2 11/18] serial_lpuart: add support for i.MXRT   Giulio Benetti
• [U-Boot] [RFC PATCH v2 12/18] ram: add SDRAM driver for i.MXRT SoCs   Giulio Benetti
• [U-Boot] [RFC PATCH v2 13/18] mmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an #if statement   Giulio Benetti
• [U-Boot] [RFC PATCH v2 14/18] mmc: fsl_esdhc: add compatible for fsl, imxrt-usdhc WIP   Giulio Benetti
• [U-Boot] [RFC PATCH v2 15/18] armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibility   Giulio Benetti
• [U-Boot] [RFC PATCH v2 16/18] video: mxsfb: add support for DM CLK   Giulio Benetti
• [U-Boot] [RFC PATCH v2 17/18] video: mxsfb: add support for i.MXRT WIP   Giulio Benetti
• [U-Boot] [RFC PATCH v2 18/18] imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK   Giulio Benetti
• [U-Boot] [PATCH] armv7m: cache: add invalidate_icache_all() stub   Giulio Benetti
• [U-Boot] [PATCH] spl: fix entry_point equal to load_addr   Giulio Benetti
• [U-Boot] [PATCH] armv7m: cache: add invalidate_icache_all() stub   Giulio Benetti
• [U-Boot] [PATCH v2] armv7m: cache: add invalidate_icache_all() stub   Giulio Benetti
• [U-Boot] [PATCH] stm32mp1: configs: fix checking the presence of an environment   Bartosz Biłas
• [U-Boot] [PATCH] stm32mp1: configs: fix checking the presence of an environment   Bartosz Biłas
• [U-Boot] Please pull ARC fixes for v2020.01-rc2   Alexey Brodkin
• [U-Boot] [PATCH] ARM: defconfig: add unified config for RPi3 and RPi4   Matthias Brugger
• [U-Boot] [PATCH] rpi4: fix dram bank initialization   Matthias Brugger
• [U-Boot] [BUG] display_options() fails on Raspberry Pi 3B+   Matthias Brugger
• [U-Boot] [BUG] display_options() fails on Raspberry Pi 3B+   Matthias Brugger
• [U-Boot] [PATCH] fdt: fix bcm283x dm-pre-reloc definitions   Matthias Brugger
• [U-Boot] Issues when saving environment in RK399 RockPI 4   Matthias Brugger
• [U-Boot] [PATCH v2 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Matthias Brugger
• [U-Boot] [PATCH] board: rpi4: fix instantiating PL011 driver   Matthias Brugger
• [U-Boot] [PATCH v2 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Matthias Brugger
• [U-Boot] [PATCH v2 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Matthias Brugger
• [U-Boot] [PATCH v3 1/4] rpi: push fw_dtb_pointer in the .data section   Matthias Brugger
• [U-Boot] [PATCH v3 4/4] ARM: bcm283x: Set memory map at run-time   Matthias Brugger
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Matthias Brugger
• [U-Boot] [PATCH v3 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Matthias Brugger
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Matthias Brugger
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Matthias Brugger
• [U-Boot] [PATCH 1/1] efi_loader: default EFI_LOADER=n on ARM11   Matthias Brugger
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Matthias Brugger
• [U-Boot] [GIT PULL resed] Raspberry Pi updates for v2020.01   Matthias Brugger
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Matthias Brugger
• [U-Boot] Raspberry Pi Compute Module 1 mini-UART   Matthias Brugger
• [U-Boot] [PATCH] ppc/km: enable DM driver support in all defconfigs   Holger Brunck
• [U-Boot] [PATCH] ppc/km: enable DM driver support in all defconfigs   Holger Brunck
• [U-Boot] [PATCH v3] ppc/km: enable DM driver support in all defconfigs   Holger Brunck
• [U-Boot] [PATCH 1/4] km/boards: fix typo for MAC address offset config option   Holger Brunck
• [U-Boot] [PATCH 2/4] km/boards: add MAC address offset as argument to ivm_populate_env   Holger Brunck
• [U-Boot] [PATCH 3/4] arm/km: remove board KMCOGE3UN   Holger Brunck
• [U-Boot] [PATCH 4/4] boards/km_arm: enable support for Macronix SPI NOR flash   Holger Brunck
• [U-Boot] [PATCH 1/4] ppc/km/tegr1: support second localbus clock signal   Holger Brunck
• [U-Boot] [PATCH 2/4] ppc/km: convert KM_DEF_NETDEV to Kconfig   Holger Brunck
• [U-Boot] [PATCH 3/4] board/km: remove CONFIG_KM_BOARD_NAME   Holger Brunck
• [U-Boot] [PATCH 4/4] ppc/kmeter1: remove unused define   Holger Brunck
• [U-Boot] [PATCH] board: Remove unnecessary inclusion of micrel.h from boards   James Byrne
• [U-Boot] [PATCH] gpio: at91_gpio: Add bank names   James Byrne
• [U-Boot] [PATCH] gpio: at91_gpio: Add bank names   James Byrne
• [U-Boot] [PATCH v2] gpio: at91_gpio: Add bank names   James Byrne
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   James Byrne
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   James Byrne
• [U-Boot] [PATCH v2 1/3] tools: checkpatch: Restore 'debug' and 'printf' to logFunctions list   James Byrne
• [U-Boot] [PATCH v2 2/3] env: Tidy up some of the env code   James Byrne
• [U-Boot] [PATCH v2 3/3] env: Provide programmatic equivalent to 'setenv -f'   James Byrne
• [U-Boot] [PATCH v3] gpio: at91_gpio: Add bank names   James Byrne
• [U-Boot] [PATCH v2 2/3] env: Tidy up some of the env code   James Byrne
• [U-Boot] [PATCH v2] cmd: remove NET and CMD_NET dependency for CMD_PXE   Patrice CHOTARD
• [U-Boot] [PATCH 1/2] video: bmp: Fix video_splash_align_axis()   Patrice CHOTARD
• [U-Boot] [PATCH 1/3] ARM: dts: stm32: DT alignment with kernel v5.3   Patrice CHOTARD
• [U-Boot] [PATCH 2/3] ARM: dts: stm32: DT alignment with kernel v5.4-rc4   Patrice CHOTARD
• [U-Boot] [PATCH] board_f.c: Insure gd->new_bootstage alignment   Patrice CHOTARD
• [U-Boot] [PATCH] omap34xx: SPL: enable MMC raw boot with u-boot.img   Denis 'GNUtoo' Carikli
• [U-Boot] [PATCH 7/8] riscv: Fix clear bss loop in the start-up code   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Rick Chen
• [U-Boot] [PATCH 1/4] asm: dma-mapping.h: Fix dma mapping functions   Rick Chen
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Veeraiyan Chidambaram
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Veeraiyan Chidambaram
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Veeraiyan Chidambaram
• [U-Boot] [PATCH v3] gitattributes: dont treat non-text files as text   Veeraiyan Chidambaram
• [U-Boot] [PATCH v4] gitattributes: dont treat non-text files as text   Veeraiyan Chidambaram
• [U-Boot] [PATCH] configs: stih410-b2260: Enable DM_ETH flag   Patrice Chotard
• [U-Boot] [PATCH 0/2] Fix BMP decode when BMP size is bigger than framebuffer   Patrice Chotard
• [U-Boot] [PATCH 1/2] video: bmp: Fix video_splash_align_axis()   Patrice Chotard
• [U-Boot] [PATCH 2/2] video: bmp: Fix video_display_rle8_bitmap()   Patrice Chotard
• [U-Boot] [PATCH v2 0/2] Fix BMP decode when BMP size is bigger than framebuffer   Patrice Chotard
• [U-Boot] [PATCH v2 1/2] video: bmp: Fix video_splash_align_axis()   Patrice Chotard
• [U-Boot] [PATCH v2 2/2] video: bmp: Fix video_display_rle8_bitmap()   Patrice Chotard
• [U-Boot] [PATCH v3 0/6] cmd: remove NET and CMD_NET dependency for CMD_PXE   Patrice Chotard
• [U-Boot] [PATCH v3 1/6] cmd: Migrate from_env() from pxe.c to nvedit.c   Patrice Chotard
• [U-Boot] [PATCH v3 2/6] cmd: Prepare sysboot command independence   Patrice Chotard
• [U-Boot] [PATCH v3 3/6] cmd: sysboot: Create a sysboot command dedicated file   Patrice Chotard
• [U-Boot] [PATCH v3 4/6] cmd: pxe_utils: Fix checkpatch WARNING/CHECK   Patrice Chotard
• [U-Boot] [PATCH v3 5/6] cmd: sysboot: Fix checkpatch WARNING/CHECK   Patrice Chotard
• [U-Boot] [PATCH v3 6/6] cmd: pxe: Fix checkpatch WARNING/CHECK   Patrice Chotard
• [U-Boot] [PATCH] board_f.c: Insure gd->new_bootstage alignment   Patrice Chotard
• [U-Boot] [PATCH v2] board_f.c: Insure gd->new_bootstage alignment   Patrice Chotard
• [U-Boot] [PATCH v3] board_f.c: Insure gd->new_bootstage alignment   Patrice Chotard
• [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images   Cristian Ciocaltea
• [U-Boot] [PATCH 1/2] image: Add IH_OS_EFI for EFI chain-load boot   Cristian Ciocaltea
• [U-Boot] [PATCH 2/2] bootm: Add a bootm command for type IH_OS_EFI   Cristian Ciocaltea
• [U-Boot] [PATCH 1/1] buildman: Improve [make-flags] section parser to allow quoted strings   Cristian Ciocaltea
• [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images   Cristian Ciocaltea
• [U-Boot] Most appropriate and scriptable way of creating partition image files   Arji Cot
• [U-Boot] [PATCH] stm32mp1: configs: fix checking the presence of an environment   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 1/5] usb: host: dwc2: add phy support   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 2/5] usb: host: dwc2: add support for clk   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 4/5] usb: host: dwc2: add usb33d supply support for stm32mp1   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert   Patrick DELAUNAY
• [U-Boot] [RESEND PATCH 1/5] usb: host: dwc2: add phy support   Patrick DELAUNAY
• [U-Boot] [PATCH v3 1/5] dm: clk: add stub for clk_disable_bulk when CONFIG_CLK is desactivated   Patrick DELAUNAY
• [U-Boot] [PATCH v3 1/5] dm: clk: add stub for clk_disable_bulk when CONFIG_CLK is desactivated   Patrick DELAUNAY
• [U-Boot] [PATCH 1/2] video: bmp: Fix video_splash_align_axis()   Patrick DELAUNAY
• [U-Boot] [PATCH v2 2/6] stm32mp1: declare backup registers for coprocessor   Patrick DELAUNAY
• [U-Boot] [PATCH v2 3/6] stm32mp1: reset coprocessor status at cold boot   Patrick DELAUNAY
• [U-Boot] [PATCH v2 4/6] remoteproc: stm32: track the coprocessor state in a backup register   Patrick DELAUNAY
• [U-Boot] [PATCH v2 5/6] stm32mp1: remove copro_state environment variable   Patrick DELAUNAY
• [U-Boot] [PATCH v2 6/6] remoteproc: stm32: load resource table from firmware   Patrick DELAUNAY
• [U-Boot] [PATCH v2 1/6] remoteproc: elf_loader: Add elf resource table load support   Patrick DELAUNAY
• [U-Boot] [PATCH] configs: stih410-b2260: Enable DM_ETH flag   Patrick DELAUNAY
• [U-Boot] [PATCH] board_f.c: Insure gd->new_bootstage alignment   Patrick DELAUNAY
• [U-Boot] [PATCH] configs: stih410-b2260: Enable DM_ETH flag   Patrick DELAUNAY
• [U-Boot] [PATCH 1/3] ARM: dts: stm32: DT alignment with kernel v5.3   Patrick DELAUNAY
• [U-Boot] [PATCH 2/3] ARM: dts: stm32: DT alignment with kernel v5.4-rc4   Patrick DELAUNAY
• [U-Boot] [PATCH 3/3] ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1   Patrick DELAUNAY
• [U-Boot] [PATCH v3 11/15] stm32mp1: activate DFU support and command MTD   Patrick DELAUNAY
• [U-Boot] [PATCH v3 12/15] stm32mp1: activate SET_DFU_ALT_INFO   Patrick DELAUNAY
• [U-Boot] [PATCH v3 13/15] stm32mp1: configs: activate CONFIG_MTD_SPI_NAND   Patrick DELAUNAY
• [U-Boot] [PATCH v3 14/15] stm32mp1: board: add spi nand support   Patrick DELAUNAY
• [U-Boot] [PATCH v3 15/15] stm32mp1: add support for virtual partition read   Patrick DELAUNAY
• [U-Boot] [PULL] Pull request: u-boot-stm32 u-boot-stm32-20191126   Patrick DELAUNAY
• [U-Boot] Most appropriate and scriptable way of creating partition image files   Alexander Dahl
• [U-Boot] How to convert imximage.cfg so it can be used in mkimage?   Alexander Dahl
• [U-Boot] How to convert imximage.cfg so it can be used in mkimage?   Alexander Dahl
• [U-Boot] [RFC PATCH] ARM: at91: Print CPU serial number in cpuinfo   Alexander Dahl
• [U-Boot] [PATCH] cmd: Add command to display or save Linux PStore dumps   Frédéric Danis
• [U-Boot] [PATCH] board: rpi4: fix instantiating PL011 driver   Mark Dapoz
• [U-Boot] [PATCH] rockchip: i2c: don't sent stop bit after each message   David.Wu
• [U-Boot] [PATCH] configs: j721e_evm_r5_defconfig: Remove SPL multi-DTB FIT support   Andrew F. Davis
• [U-Boot] [PATCH 1/3] tools: dumpimage: Provide more feedback on internal errors   Andrew F. Davis
• [U-Boot] [PATCH 0/6] J721e HS device support   Andrew F. Davis
• [U-Boot] [PATCH 1/6] configs: j721e_evm.h: Sync J721e environment configuration with AM65x   Andrew F. Davis
• [U-Boot] [PATCH 2/6] configs: ti: Factor out call to 'args_mmc' into MMC common environment   Andrew F. Davis
• [U-Boot] [PATCH 3/6] arm: K3: Fix header comment match AM6 specific file function   Andrew F. Davis
• [U-Boot] [PATCH 4/6] arm: K3: Disable ROM configured firewalls   Andrew F. Davis
• [U-Boot] [PATCH 5/6] arm: K3: Increase default SYSFW image size allocation   Andrew F. Davis
• [U-Boot] [PATCH 6/6] configs: Add configs for J721e High Security EVM   Andrew F. Davis
• [U-Boot] [PATCH 0/3] ARM: dts: stm32: udpate device tree for v2020.01   Patrick Delaunay
• [U-Boot] [PATCH 1/3] ARM: dts: stm32: DT alignment with kernel v5.3   Patrick Delaunay
• [U-Boot] [PATCH 2/3] ARM: dts: stm32: DT alignment with kernel v5.4-rc4   Patrick Delaunay
• [U-Boot] [PATCH 3/3] ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1   Patrick Delaunay
• [U-Boot] [PATCH v2 0/4] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick Delaunay
• [U-Boot] [PATCH v2 1/4] usb: host: dwc2: add phy support   Patrick Delaunay
• [U-Boot] [PATCH v2 2/4] usb: host: dwc2: add clk support   Patrick Delaunay
• [U-Boot] [PATCH v2 3/4] usb: host: dwc2: force reset assert   Patrick Delaunay
• [U-Boot] [PATCH v2 4/4] usb: host: dwc2: add trace to have clean usb start   Patrick Delaunay
• [U-Boot] [PATCH v2 0/4] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick Delaunay
• [U-Boot] [PATCH v3 0/5] usb: host: dwc2: use driver model for PHY and CLOCK   Patrick Delaunay
• [U-Boot] [PATCH v3 1/5] dm: clk: add stub for clk_disable_bulk when CONFIG_CLK is desactivated   Patrick Delaunay
• [U-Boot] [PATCH v3 2/5] usb: host: dwc2: add phy support   Patrick Delaunay
• [U-Boot] [PATCH v3 3/5] usb: host: dwc2: add clk support   Patrick Delaunay
• [U-Boot] [PATCH v3 4/5] usb: host: dwc2: force reset assert   Patrick Delaunay
• [U-Boot] [PATCH v3 5/5] usb: host: dwc2: add trace to have clean usb start   Patrick Delaunay
• [U-Boot] [PATCH 1/7] phy: generic: add error trace to detect PHY issue in uclass   Patrick Delaunay
• [U-Boot] [PATCH 2/7] usb: gadget: dwc2: change trace level for phy errors managed by uclass   Patrick Delaunay
• [U-Boot] [PATCH 3/7] board: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
• [U-Boot] [PATCH 4/7] usb: host: ohci: change trace level for phy errors managed by uclass   Patrick Delaunay
• [U-Boot] [PATCH 5/7] usb: host: ehci-hcd: change trace level for phy errors managed by uclass   Patrick Delaunay
• [U-Boot] [PATCH 6/7] usb: dwc3: change trace level for phy errors managed by uclass   Patrick Delaunay
• [U-Boot] [PATCH 7/7] ata: dwc-ahci: change trace level for phy errors managed by uclass   Patrick Delaunay
• [U-Boot] [PATCH] video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support   Patrick Delaunay
• [U-Boot] [PATCH v2 00/14] dm: add support of new binding in gpio and pincontrol   Patrick Delaunay
• [U-Boot] [PATCH v2 01/14] dm: pinctrl: convert pinctrl-single to livetree   Patrick Delaunay
• [U-Boot] [PATCH v2 02/14] dm: core: add ofnode and dev function to iterate on node property   Patrick Delaunay
• [U-Boot] [PATCH v2 03/14] dm: pinctrl: migrate pinctrl-generic to livetree   Patrick Delaunay
• [U-Boot] [PATCH v2 04/14] dt-bindings: gpio: document the new pull-up/pull-down flags   Patrick Delaunay
• [U-Boot] [PATCH v2 05/14] gpio: remove GPIOD_REQUESTED   Patrick Delaunay
• [U-Boot] [PATCH v2 06/14] gpio: remove the open_drain API and ops   Patrick Delaunay
• [U-Boot] [PATCH v2 07/14] gpio: add gpio descriptor initialization helper   Patrick Delaunay
• [U-Boot] [PATCH v2 08/14] gpio: add ops for configuration with dir flags   Patrick Delaunay
• [U-Boot] [PATCH v2 09/14] dt-bindings: gpio: alignment with kernel v5.3   Patrick Delaunay
• [U-Boot] [PATCH v2 10/14] pinctrl: sandbox: Add mux information in get_pin_muxing   Patrick Delaunay
• [U-Boot] [PATCH v2 11/14] test: dm: update test for pins configuration in pinctrl node   Patrick Delaunay
• [U-Boot] [PATCH v2 12/14] gpio: sandbox: cleanup binding support   Patrick Delaunay
• [U-Boot] [PATCH v2 13/14] test: dm: update test for pins configuration in gpio   Patrick Delaunay
• [U-Boot] [PATCH v2 14/14] test: pinmux: add pincontrol-gpio for pin configuration   Patrick Delaunay
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Wolfgang Denk
• [U-Boot] [PATCH v5 00/19] efi_loader: non-volatile variables support   Wolfgang Denk
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Wolfgang Denk
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Wolfgang Denk
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Wolfgang Denk
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Wolfgang Denk
• [U-Boot] [PATCH] [Cosmetic] Fix CRLF mess in shell script   Wolfgang Denk
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Wolfgang Denk
• [U-Boot] White space cleanup   Wolfgang Denk
• [U-Boot] White space cleanup   Wolfgang Denk
• [U-Boot] [PATCH 1/1] env: Exit tools when invalid CRC found   Wolfgang Denk
• [U-Boot] [PATCH v3] Update MAINTAINERS to include environment files   Wolfgang Denk
• [U-Boot] [PATCH 1/5] Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."   Wolfgang Denk
• [U-Boot] SPDX header might be wrong in 4 files from Android Open Source Project   Alex Deymo
• [U-Boot] [PATCH] usb: Make USB_MUSB_PIO_ONLY conditional on USB_MUSB_{HOST, GADGET}   Samuel Dionne-Riel
• [U-Boot] [PATCH v2] usb: Make USB_MUSB_PIO_ONLY selected by USB_MUSB_SUNXI   Samuel Dionne-Riel
• [U-Boot] [PATCH] usb: ehci: add ehci max xfer size ehci config entry   Gilles Doffe
• [U-Boot] [PATCH] configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Levin Du
• [U-Boot] [PATCH] m68k: Drop CONFIG_MCFPIT support   Angelo Dureghello
• [U-Boot] [PATCH 1/9] m68k: add fec base node to devicetrees   Angelo Dureghello
• [U-Boot] [PATCH 2/9] m68k: add fec fdt overrides to all boards   Angelo Dureghello
• [U-Boot] [PATCH 3/9] configs: add eth dm support for all ColdFire boards   Angelo Dureghello
• [U-Boot] [PATCH 4/9] configs: purge unneeded fec defines   Angelo Dureghello
• [U-Boot] [PATCH 5/9] m68k: add dm fec support   Angelo Dureghello
• [U-Boot] [PATCH 6/9] drivers: net: add mcf fec dm Kconfig support   Angelo Dureghello
• [U-Boot] [PATCH 7/9] drivers: mcffec: conversion to dm   Angelo Dureghello
• [U-Boot] [PATCH 8/9] drivers: fsl_mcdmafec: conversion to dm   Angelo Dureghello
• [U-Boot] [PATCH 9/9] drivers: mcfmii: add dm support   Angelo Dureghello
• [U-Boot] [PATCH 2/5] common: add blkcache init   Angelo Dureghello
• [U-Boot] [RESEND PATCH] common: add blkcache init   Angelo Dureghello
• [U-Boot] [PATCH] drivers: mmc: fsl_esdhc_imx: add m68k support   Angelo Dureghello
• [U-Boot] [PATCH 2/5] common: add blkcache init   Angelo Dureghello
• [U-Boot] [PATCH] video: mxsfb: Configure the clock after eLCDIF reset   Fabio Estevam
• [U-Boot] [RFC PATCH 5/5] Add support for the NXP IMXRT1050-EVK board   Fabio Estevam
• [U-Boot] [RFC PATCH 0/5] WIP Add support for i.MXRT family   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Allow configuring the NoC registers on i.MX6QP   Fabio Estevam
• [U-Boot] [PATCH 4/4] mx6: Allow configuring the NoC registers on i.MX6QP   Fabio Estevam
• [U-Boot] [RFC PATCH 4/5] ram: add SDRAM driver for i.MXRT SoCs   Fabio Estevam
• [U-Boot] [PATCH v3 1/6] mx7ulp: Print the LDO mode status   Fabio Estevam
• [U-Boot] [PATCH v3 2/6] mx7ulp: Introduce the CONFIG_LDO_ENABLED_MODE option   Fabio Estevam
• [U-Boot] [PATCH v3 3/6] mx7ulp: Remove the _RUN notation from the PMC1 LDOVL definitions   Fabio Estevam
• [U-Boot] [PATCH v3 4/6] mx7ulp: scg: Remove unnused scg_a7_apll_init()   Fabio Estevam
• [U-Boot] [PATCH v3 5/6] mx7ulp: Sync the device tree related files   Fabio Estevam
• [U-Boot] [PATCH v3 6/6] mx7ulp: Add support for Embedded Artists COM board   Fabio Estevam
• [U-Boot] [PATCH v2 6/6] mx7ulp: Add support for Embedded Artists COM board   Fabio Estevam
• [U-Boot] [PATCH 1/2] arm: dts: hummingboard: add cubox/hummingboard DT   Fabio Estevam
• [U-Boot] [PATCH 1/2] arm: dts: hummingboard: add cubox/hummingboard DT   Fabio Estevam
• [U-Boot] [PATCH 2/2] ARM: dts: imx6qdl: Add U-Boot specific device tree files for Cubox-i   Fabio Estevam
• [U-Boot] Issues when saving environment in RK399 RockPI 4   Fabio Estevam
• [U-Boot] [PATCH] mx6cuboxi: Add Baruch as maintainer   Fabio Estevam
• [U-Boot] [PATCH v2 1/4] dt-bindings: add imx-audmux macro definitions   Fabio Estevam
• [U-Boot] [PATCH v2 2/4] arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)   Fabio Estevam
• [U-Boot] [PATCH v2 3/4] arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)   Fabio Estevam
• [U-Boot] [PATCH v2 4/4] mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB   Fabio Estevam
• [U-Boot] Add support for imxrt   Fabio Estevam
• [U-Boot] [PATCH v3 6/6] mx7ulp: Add support for Embedded Artists COM board   Fabio Estevam
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Fabio Estevam
• [U-Boot] [PATCH v2] mx6: Allow configuring the NoC registers on i.MX6QP   Fabio Estevam
• [U-Boot] [PATCH v3 6/6] mx7ulp: Add support for Embedded Artists COM board   Fabio Estevam
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Fabio Estevam
• [U-Boot] [PATCH v3 6/6] mx7ulp: Add support for Embedded Artists COM board   Fabio Estevam
• [U-Boot] [PATCH v2 1/1] arm: fix -march for ARM11   Fabio Estevam
• [U-Boot] Pico-imx7d and imx7d sabre Break on 2020.01-rc3   Fabio Estevam
• [U-Boot] [PATCH] Revert "video: mxsfb: Configure the clock after eLCDIF reset"   Fabio Estevam
• [U-Boot] imx8mq-evk boot regression   Fabio Estevam
• [U-Boot] imx8mq-evk boot regression   Fabio Estevam
• [U-Boot] imx8mq-evk boot regression   Fabio Estevam
• [U-Boot] [PATCH] warp7: Fix U-Boot corruption after saving the environment   Fabio Estevam
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Fabio Estevam
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Fabio Estevam
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Fabio Estevam
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Fabio Estevam
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Fabio Estevam
• [U-Boot] [PATCH V4 5/6] net: fec_mxc: support i.MX8M with CLK_CCF   Peng Fan
• [U-Boot] [PATCH V4 5/6] net: fec_mxc: support i.MX8M with CLK_CCF   Peng Fan
• [U-Boot] [PATCH] imx: Kconfig: fix dependency of SPL_IMX_ROMAPI_LOADADDR   Peng Fan
• [U-Boot] [PATCH] power: regulator: support off-on-delay-us   Peng Fan
• [U-Boot] [PATCH 1/2] mmc: fsl_esdhc_imx: drop redundant clock settings   Peng Fan
• [U-Boot] [PATCH 2/2] mmc: fsl_esdhc_imx: Update compatible string for imx8m   Peng Fan
• [U-Boot] [PATCH] imx: sync with kernel device tree for Phycore SoM   Peng Fan
• [U-Boot] [PATCH v2 6/6] mx7ulp: Add support for Embedded Artists COM board   Peng Fan
• [U-Boot] [NXP-IMX] please pull imx-master-11-4   Peng Fan
• [U-Boot] [PULL] u-boot-mmc mmc-2019-11-5   Peng Fan
• [U-Boot] [PATCH v1] imx: bootaux: elf firmware support   Peng Fan
• [U-Boot] [PATCH v3 6/6] mx7ulp: Add support for Embedded Artists COM board   Peng Fan
• [U-Boot] [PATCH v3 6/6] mx7ulp: Add support for Embedded Artists COM board   Peng Fan
• [U-Boot] [PATCH] mmc: sdhci: make sdhci_get_cd static   Peng Fan
• [U-Boot] [PATCH 0/4] Drop redundant code for eSDHC clock getting   Peng Fan
• [U-Boot] [PATCH 1/9] mmc: tmio: sdhi: Track current tap number in private data   Peng Fan
• [U-Boot] [PATCH 9/9] mmc: tmio: sdhi: Add calibration tables   Peng Fan
• [U-Boot] [NXP-IMX] please pull imx-master-11-21   Peng Fan
• [U-Boot] Please pull mmc-11-27-2019   Peng Fan
• [U-Boot] [PATCH] ARM: imx6q_logic: Cleanup boot sequence check   Adam Ford
• [U-Boot] [PATCH] ARM: omap3_logic: Power on MMC when setting up PMIC   Adam Ford
• [U-Boot] [PATCH 1/2] ARM: dts: logicpd-torpedo-37xx-devkit-u-boot: Remove unused GPIO   Adam Ford
• [U-Boot] [PATCH 2/2] Revert "ARM: omap3_logic/omap35_logic: Enable GPIO in SPL"   Adam Ford
• [U-Boot] [PATCH 1/2] ARM: dts: logicpd-som-lv-37xx-devkit-u-boot: Remove unused GPIO   Adam Ford
• [U-Boot] [PATCH 2/2] configs: omap3_logic_somlv: Remove GPIO from SPL   Adam Ford
• [U-Boot] [PATCH] imx: Make NAND BCB dependent on ARCH_MX6   Adam Ford
• [U-Boot] [PATCH] Kconfig: ti: Make board detect EEPROM addresses depend BOARD_DETECT   Adam Ford
• [U-Boot] [PATCH] Kconfig: Make ZYNQMP_FIRMWARE depend on ARCH_ZYNQMP   Adam Ford
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Adam Ford
• [U-Boot] [PATCH v4 2/5] omap: mmc: Avoid using libfdt with of-platdata   Adam Ford
• [U-Boot] [PATCH] ARM: omapl138_lcdk: Shrink code size by building with Thumb   Adam Ford
• [U-Boot] [PATCH 1/3] ARM: omapl138_lcdk: Separate BSS in SPL   Adam Ford
• [U-Boot] [PATCH 2/3] ARM: omapl138_lcdk: Increase malloc pool before relocation   Adam Ford
• [U-Boot] [PATCH 3/3] ARM: omapl138_lcdk: Enable SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE   Adam Ford
• [U-Boot] [PATCH v4 2/5] omap: mmc: Avoid using libfdt with of-platdata   Adam Ford
• [U-Boot] [PATCH] ARM: omapl138_lcdk: Allow early init to start instruction cache   Adam Ford
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Adam Ford
• [U-Boot] [PATCH] ARM: da850-evm: Disable SYS_MMCSD_RAW_MODE_USE_SECTOR   Adam Ford
• [U-Boot] [PATCH] ARM: dts: da850-lcdk: Update DTS files for SPL device tree support   Adam Ford
• [U-Boot] [PATCH] include/env.h: Ensure ulong is defined   Alistair Francis
• [U-Boot] [PATCH] include/env.h: Ensure ulong is defined   Alistair Francis
• [U-Boot] [PATCH] include/env.h: Ensure ulong is defined   Alistair Francis
• [U-Boot] [PATCH v4 2/5] net: mvpp2: mark phy as invalid in case of missing appropriate driver   Ramon Fried
• [U-Boot] [PATCH v4 3/5] arm: dts: armada-cp110-*dtsi: add xmdio nodes   Ramon Fried
• [U-Boot] [PATCH v4 4/5] net: mvpp2: use new MVMDIO driver   Ramon Fried
• [U-Boot] [PATCH v4 5/5] net: mvpp2: MVPP2 now needs MVMDIO   Ramon Fried
• [U-Boot] [PATCH v4 1/5] net: mvpp2x: fix traffic stuck after PHY start error   Ramon Fried
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Ramon Fried
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Ramon Fried
• [U-Boot] Buildman Kconfig issue with consecutive builds   Schrempf Frieder
• [U-Boot] Buildman Kconfig issue with consecutive builds   Schrempf Frieder
• [U-Boot] Buildman Kconfig issue with consecutive builds   Schrempf Frieder
• [U-Boot] Buildman Kconfig issue with consecutive builds   Schrempf Frieder
• [U-Boot] Buildman Kconfig issue with consecutive builds   Schrempf Frieder
• [U-Boot] Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)   Andreas Färber
• [U-Boot] Multiple ramdisks in FIT image   Gamble, Bradley
• [U-Boot] How to convert imximage.cfg so it can be used in mkimage?   Winston Gao
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Ezequiel Garcia
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Ezequiel Garcia
• [U-Boot] Issues when saving environment in RK399 RockPI 4   Ezequiel Garcia
• [U-Boot] Issues when saving environment in RK399 RockPI 4   Ezequiel Garcia
• [U-Boot] [PATCH] board_r: Detect ifc-nor flash at run-time   Pankit Garg
• [U-Boot] [PATCH] env: Update env_addr for mmc environment driver   Pankit Garg
• [U-Boot] [u-boot] [v4] armv8: ls1028ardb: enable DisplayPort Power support   Jagdish Gediya
• [U-Boot] [PATCH 0/7] x86: coral: Add support for Cr50   Simon Glass
• [U-Boot] [PATCH 1/7] coral: Update i2c and rtc status   Simon Glass
• [U-Boot] [PATCH 2/7] tpm: Add more TPM2 definitions   Simon Glass
• [U-Boot] [PATCH 3/7] tpm: Add a driver for H1/Cr50   Simon Glass
• [U-Boot] [PATCH 4/7] pci: i2c: designware: Add compatible string   Simon Glass
• [U-Boot] [PATCH 5/7] coral: Add I2C and TPM device-tree definitions   Simon Glass
• [U-Boot] [PATCH 6/7] i2c: designware: Drop invalid debugging   Simon Glass
• [U-Boot] [PATCH 7/7] x86: coral: Enable TPM   Simon Glass
• [U-Boot] [PATCH v3 016/108] fdt: Show the preprocessed .dts file on error   Simon Glass
• [U-Boot] [PATCH v3 018/108] Revert "RFC: sandbox: net: Suppress the MAC-address warnings"   Simon Glass
• [U-Boot] [PATCH v3 026/108] x86: timer: Reduce timer code size in TPL on Intel CPUs   Simon Glass
• [U-Boot] [PATCH v3 013/108] x86: spi: Add helper functions for Intel Fast SPI   Simon Glass
• [U-Boot] [PATCH v3 013/108] x86: spi: Add helper functions for Intel Fast SPI   Simon Glass
• [U-Boot] [PATCH v3 013/108] x86: spi: Add helper functions for Intel Fast SPI   Simon Glass
• [U-Boot] [PATCH v1 2/4] dm: board: complete the initialization of the muxes in initr_dm()   Simon Glass
• [U-Boot] Please pull u-boot-fdt   Simon Glass
• [U-Boot] [PATCH] Revert "binman: Correct symbol calculation with non-zero image base"   Simon Glass
• [U-Boot] [PATCH 26/34] binman: Correct symbol calculation with non-zero image base   Simon Glass
• [U-Boot] [PATCH v1 2/3] drivers: reset: Add a managed API to get reset controllers from the DT   Simon Glass
• [U-Boot] [PATCH] binman: tegra: Adjust symbol calculation depending on end-at-4gb   Simon Glass
• [U-Boot] [PATCH v4 0/5] of-platdata: Avoid building libfdt   Simon Glass
• [U-Boot] [PATCH v4 1/5] rockchip: Avoid using libfdt with of-platdata   Simon Glass
• [U-Boot] [PATCH v4 2/5] omap: mmc: Avoid using libfdt with of-platdata   Simon Glass
• [U-Boot] [PATCH v4 3/5] rockchip: pinctrl: Disable full pinctrl for SPL   Simon Glass
• [U-Boot] [PATCH v4 4/5] dm: core: Don't include ofnode functions with of-platdata   Simon Glass
• [U-Boot] [PATCH v4 5/5] spl: Allow SPL/TPL to use of-platdata without libfdt   Simon Glass
• [U-Boot] [PATCH] patman: Fix cc-cmd option for Python 3   Simon Glass
• [U-Boot] Buildman Kconfig issue with consecutive builds   Simon Glass
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Simon Glass
• [U-Boot] Buildman Kconfig issue with consecutive builds   Simon Glass
• [U-Boot] [PATCH v2 00/41] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v2 01/41] common: Move legacy CPU functions to their own header   Simon Glass
• [U-Boot] [PATCH v2 02/41] Drop CONFIG_SHOW_ACTIVITY   Simon Glass
• [U-Boot] [PATCH v2 03/41] common: Drop global inclusion of status_led.h   Simon Glass
• [U-Boot] [PATCH v2 04/41] status_led: Tidy up the code style   Simon Glass
• [U-Boot] [PATCH v2 05/41] common: Move random-number functions into their own header   Simon Glass
• [U-Boot] [PATCH v2 06/41] common: Drop linux/crc8.h   Simon Glass
• [U-Boot] [PATCH v2 07/41] crc: Fix code style with crc functions   Simon Glass
• [U-Boot] [PATCH v2 08/41] crc32: Use the crc.h header for crc functions   Simon Glass
• [U-Boot] [PATCH v2 09/41] spl: bootcount: Move code out of header file   Simon Glass
• [U-Boot] [PATCH v2 10/41] common: Move bootcount functions to their header file   Simon Glass
• [U-Boot] [PATCH v2 11/41] common: Move sorting functions to their own header file   Simon Glass
• [U-Boot] [PATCH v2 12/41] Move strtomhz() to vsprintf.h   Simon Glass
• [U-Boot] [PATCH v2 13/41] common: Move env_get_ip() to net.h   Simon Glass
• [U-Boot] [PATCH v2 14/41] serial: usb: Correct the usbtty_...() prototypes   Simon Glass
• [U-Boot] [PATCH v2 15/41] common: Move serial_printf() to the serial header   Simon Glass
• [U-Boot] [PATCH v2 16/41] common: Move serial functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 17/41] common: Add a new lz4.h header file   Simon Glass
• [U-Boot] [PATCH v2 18/41] common: Move some time functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 19/41] common: Move wait_ticks functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 20/41] common: Move timer_get_us() function out of common.h   Simon Glass
• [U-Boot] [PATCH v2 21/41] common: Move get_ticks() function out of common.h   Simon Glass
• [U-Boot] [PATCH v2 22/41] common: Move mii_init() function out of common.h   Simon Glass
• [U-Boot] [PATCH v2 23/41] common: Move some CPU functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 24/41] common: Drop cpu_init()   Simon Glass
• [U-Boot] [PATCH v2 25/41] common: Move checkcpu() out of common.h   Simon Glass
• [U-Boot] [PATCH v2 26/41] common: Move some SMP functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 27/41] arm: powerpc: Tidy up code style for cache functions   Simon Glass
• [U-Boot] [PATCH v2 28/41] common: Move some cache and MMU functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 29/41] common: Drop checkicache() and checkdcache()   Simon Glass
• [U-Boot] [PATCH v2 30/41] common: Move ARM cache operations out of common.h   Simon Glass
• [U-Boot] [PATCH v2 31/41] arm: powerpc: Tidy up code style for interrupt functions   Simon Glass
• [U-Boot] [PATCH v2 32/41] common: Move interrupt functions into a new header   Simon Glass
• [U-Boot] [PATCH v2 33/41] common: Move enable/disable_interrupts out of common.h   Simon Glass
• [U-Boot] [PATCH v2 34/41] common: Move command functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 35/41] common: Drop board_show_dram()   Simon Glass
• [U-Boot] [PATCH v2 36/41] common: Move board_get_usable_ram_top() out of common.h   Simon Glass
• [U-Boot] [PATCH v2 37/41] common: Move some board functions out of common.h   Simon Glass
• [U-Boot] [PATCH v2 38/41] common: Move pci_init_board() out of common.h   Simon Glass
• [U-Boot] [PATCH v2 39/41] common: Move trap_init() out of common.h   Simon Glass
• [U-Boot] [PATCH v2 40/41] common: Drop get_endaddr()   Simon Glass
• [U-Boot] [PATCH v2 41/41] common: Move old EEPROM functions into a new header   Simon Glass
• [U-Boot] [PATCH v2 00/41] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v2 00/41] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v3 043/108] x86: Adjust mrccache_get_region() to use livetree   Simon Glass
• [U-Boot] [PATCH v2 05/41] common: Move random-number functions into their own header   Simon Glass
• [U-Boot] [PATCH v2 32/41] common: Move interrupt functions into a new header   Simon Glass
• [U-Boot] [PATCH v3 00/42] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v3 01/42] common: Move legacy CPU functions to their own header   Simon Glass
• [U-Boot] [PATCH v3 02/42] Drop CONFIG_SHOW_ACTIVITY   Simon Glass
• [U-Boot] [PATCH v3 03/42] common: Drop global inclusion of status_led.h   Simon Glass
• [U-Boot] [PATCH v3 04/42] status_led: Tidy up the code style   Simon Glass
• [U-Boot] [PATCH v3 05/42] common: Move random-number functions into their own header   Simon Glass
• [U-Boot] [PATCH v3 06/42] common: Drop linux/crc8.h   Simon Glass
• [U-Boot] [PATCH v3 07/42] crc: Fix code style with crc functions   Simon Glass
• [U-Boot] [PATCH v3 08/42] crc32: Use the crc.h header for crc functions   Simon Glass
• [U-Boot] [PATCH v3 09/42] spl: bootcount: Move code out of header file   Simon Glass
• [U-Boot] [PATCH v3 10/42] common: Move bootcount functions to their header file   Simon Glass
• [U-Boot] [PATCH v3 11/42] common: Move sorting functions to their own header file   Simon Glass
• [U-Boot] [PATCH v3 12/42] Move strtomhz() to vsprintf.h   Simon Glass
• [U-Boot] [PATCH v3 13/42] common: Move env_get_ip() to net.h   Simon Glass
• [U-Boot] [PATCH v3 14/42] serial: usb: Correct the usbtty_...() prototypes   Simon Glass
• [U-Boot] [PATCH v3 15/42] common: Move serial_printf() to the serial header   Simon Glass
• [U-Boot] [PATCH v3 16/42] common: Move serial functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 17/42] common: Add a new lz4.h header file   Simon Glass
• [U-Boot] [PATCH v3 18/42] common: Move some time functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 19/42] common: Move wait_ticks functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 20/42] arm: pxa: Drop pxa_wait_ticks()   Simon Glass
• [U-Boot] [PATCH v3 21/42] common: Move timer_get_us() function out of common.h   Simon Glass
• [U-Boot] [PATCH v3 22/42] common: Move get_ticks() function out of common.h   Simon Glass
• [U-Boot] [PATCH v3 23/42] common: Move mii_init() function out of common.h   Simon Glass
• [U-Boot] [PATCH v3 24/42] common: Move some CPU functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 25/42] common: Drop cpu_init()   Simon Glass
• [U-Boot] [PATCH v3 26/42] common: Move checkcpu() out of common.h   Simon Glass
• [U-Boot] [PATCH v3 27/42] common: Move some SMP functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 28/42] arm: powerpc: Tidy up code style for cache functions   Simon Glass
• [U-Boot] [PATCH v3 29/42] common: Move some cache and MMU functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 30/42] common: Drop checkicache() and checkdcache()   Simon Glass
• [U-Boot] [PATCH v3 31/42] common: Move ARM cache operations out of common.h   Simon Glass
• [U-Boot] [PATCH v3 32/42] arm: powerpc: Tidy up code style for interrupt functions   Simon Glass
• [U-Boot] [PATCH v3 33/42] common: Move interrupt functions into a new header   Simon Glass
• [U-Boot] [PATCH v3 34/42] common: Move enable/disable_interrupts out of common.h   Simon Glass
• [U-Boot] [PATCH v3 35/42] common: Move command functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 36/42] common: Drop board_show_dram()   Simon Glass
• [U-Boot] [PATCH v3 37/42] common: Move board_get_usable_ram_top() out of common.h   Simon Glass
• [U-Boot] [PATCH v3 38/42] common: Move some board functions out of common.h   Simon Glass
• [U-Boot] [PATCH v3 39/42] common: Move pci_init_board() out of common.h   Simon Glass
• [U-Boot] [PATCH v3 40/42] common: Move trap_init() out of common.h   Simon Glass
• [U-Boot] [PATCH v3 41/42] common: Drop get_endaddr()   Simon Glass
• [U-Boot] [PATCH v3 42/42] common: Move old EEPROM functions into a new header   Simon Glass
• [U-Boot] [PATCH] patman: fix coverletter cc list with nulls   Simon Glass
• [U-Boot] [PATCH v3 3/4] image: fdt: copy possible optee nodes to a loaded devicetree   Simon Glass
• [U-Boot] [PATCH v3 01/42] common: Move legacy CPU functions to their own header   Simon Glass
• [U-Boot] [PATCH v4 00/42] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v4 01/42] common: Move older CPU functions to their own header   Simon Glass
• [U-Boot] [PATCH v4 02/42] Drop CONFIG_SHOW_ACTIVITY   Simon Glass
• [U-Boot] [PATCH v4 03/42] common: Drop global inclusion of status_led.h   Simon Glass
• [U-Boot] [PATCH v4 04/42] status_led: Tidy up the code style   Simon Glass
• [U-Boot] [PATCH v4 05/42] common: Move random-number functions into their own header   Simon Glass
• [U-Boot] [PATCH v4 06/42] common: Drop linux/crc8.h   Simon Glass
• [U-Boot] [PATCH v4 07/42] crc: Fix code style with crc functions   Simon Glass
• [U-Boot] [PATCH v4 08/42] crc32: Use the crc.h header for crc functions   Simon Glass
• [U-Boot] [PATCH v4 09/42] spl: bootcount: Move code out of header file   Simon Glass
• [U-Boot] [PATCH v4 10/42] common: Move bootcount functions to their header file   Simon Glass
• [U-Boot] [PATCH v4 11/42] common: Move sorting functions to their own header file   Simon Glass
• [U-Boot] [PATCH v4 12/42] Move strtomhz() to vsprintf.h   Simon Glass
• [U-Boot] [PATCH v4 13/42] common: Move env_get_ip() to net.h   Simon Glass
• [U-Boot] [PATCH v4 14/42] serial: usb: Correct the usbtty_...() prototypes   Simon Glass
• [U-Boot] [PATCH v4 15/42] common: Move serial_printf() to the serial header   Simon Glass
• [U-Boot] [PATCH v4 16/42] common: Move serial functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 17/42] common: Add a new lz4.h header file   Simon Glass
• [U-Boot] [PATCH v4 18/42] common: Move some time functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 19/42] common: Move wait_ticks functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 20/42] arm: pxa: Drop pxa_wait_ticks()   Simon Glass
• [U-Boot] [PATCH v4 21/42] common: Move timer_get_us() function out of common.h   Simon Glass
• [U-Boot] [PATCH v4 22/42] common: Move get_ticks() function out of common.h   Simon Glass
• [U-Boot] [PATCH v4 23/42] common: Move mii_init() function out of common.h   Simon Glass
• [U-Boot] [PATCH v4 24/42] common: Move some CPU functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 25/42] common: Drop cpu_init()   Simon Glass
• [U-Boot] [PATCH v4 26/42] common: Move checkcpu() out of common.h   Simon Glass
• [U-Boot] [PATCH v4 27/42] common: Move some SMP functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 28/42] arm: powerpc: Tidy up code style for cache functions   Simon Glass
• [U-Boot] [PATCH v4 29/42] common: Move some cache and MMU functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 30/42] common: Drop checkicache() and checkdcache()   Simon Glass
• [U-Boot] [PATCH v4 31/42] common: Move ARM cache operations out of common.h   Simon Glass
• [U-Boot] [PATCH v4 32/42] arm: powerpc: Tidy up code style for interrupt functions   Simon Glass
• [U-Boot] [PATCH v4 33/42] common: Move interrupt functions into a new header   Simon Glass
• [U-Boot] [PATCH v4 34/42] common: Move enable/disable_interrupts out of common.h   Simon Glass
• [U-Boot] [PATCH v4 35/42] common: Move command functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 36/42] common: Drop board_show_dram()   Simon Glass
• [U-Boot] [PATCH v4 37/42] common: Move board_get_usable_ram_top() out of common.h   Simon Glass
• [U-Boot] [PATCH v4 38/42] common: Move some board functions out of common.h   Simon Glass
• [U-Boot] [PATCH v4 39/42] common: Move pci_init_board() out of common.h   Simon Glass
• [U-Boot] [PATCH v4 40/42] common: Move trap_init() out of common.h   Simon Glass
• [U-Boot] [PATCH v4 41/42] common: Drop get_endaddr()   Simon Glass
• [U-Boot] [PATCH v4 42/42] common: Move old EEPROM functions into a new header   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v4 31/42] common: Move ARM cache operations out of common.h   Simon Glass
• [U-Boot] Build warnings in libfdt   Simon Glass
• [U-Boot] [U-Boot-Board-Maintainers] Please pull u-boot-fdt   Simon Glass
• [U-Boot] flashing and testing u-boot on chromebook_bob   Simon Glass
• [U-Boot] [PATCH] dm: serial: Handle "stdout-path" with ":options" correctly   Simon Glass
• [U-Boot] Best way to use UCLASS_GPIO board id   Simon Glass
• [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: allow inclusion of a tee binary   Simon Glass
• [U-Boot] Best way to use UCLASS_GPIO board id   Simon Glass
• [U-Boot] [PATCH v1 1/1] cmd: pxe: Fix bootm argument count   Simon Glass
• [U-Boot] [PATCH v1 1/1] cmd: adding malloc, math, and strcmp commands to u-boot   Simon Glass
• [U-Boot] flashing and testing u-boot on chromebook_bob   Simon Glass
• [U-Boot] [PATCHv2 2/5] env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check   Simon Glass
• [U-Boot] test: Coverage error tools/binman/etype/cbfs.py 97% on i686   Simon Glass
• [U-Boot] [PATCH v3 077/108] spi: ich: Move the protection/lockdown code into a function   Simon Glass
• [U-Boot] [PATCH v3 081/108] spi: ich: Add mmio_base to struct ich_spi_platdata   Simon Glass
• [U-Boot] [PATCH v3 083/108] spi: ich: Support of-platdata for fast-spi   Simon Glass
• [U-Boot] [PATCH v3 1/6] lib: rsa: decouple rsa from FIT image verification   Simon Glass
• [U-Boot] [PATCH v3 2/6] rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config   Simon Glass
• [U-Boot] [PATCH v3 3/6] include: image.h: add key info to image_sign_info   Simon Glass
• [U-Boot] [PATCH v3 5/6] lib: rsa: add rsa_verify_with_pkey()   Simon Glass
• [U-Boot] [PATCH v3 6/6] test: add rsa_verify() unit test   Simon Glass
• [U-Boot] [PATCH v3 4/6] lib: rsa: generate additional parameters for public key   Simon Glass
• [U-Boot] [RFC PATCH 01/29] include: pci_ids: add vendor ID for Cavium   Simon Glass
• [U-Boot] [RFC PATCH 02/29] include: pci: Increase max pci region limit   Simon Glass
• [U-Boot] [RFC PATCH 03/29] fdtdec: add API to read pci bus-range property   Simon Glass
• [U-Boot] [RFC PATCH 04/29] drivers: pci-uclass: fix incorrect argument in map_sysmem   Simon Glass
• [U-Boot] [RFC PATCH 05/29] drivers: pci-uclass: make DT subnode parse optional   Simon Glass
• [U-Boot] [RFC PATCH 06/29] drivers: pci-uclass: add multi entry support for pci regions   Simon Glass
• [U-Boot] [RFC PATCH 07/29] drivers: pci-uclass: add support for Enhanced Allocation in Bridges   Simon Glass
• [U-Boot] [RFC PATCH 08/29] drivers: pci-uclass: add support for Single-Root I/O Virtualizaiton   Simon Glass
• [U-Boot] [RFC PATCH 09/29] drivers: pci-uclass: add VF map_bar support for Enhanced Allocation   Simon Glass
• [U-Boot] [RFC PATCH 10/29] drivers: pci-uclass: Add support for Alternate-RoutingID capability   Simon Glass
• [U-Boot] [RFC PATCH 11/29] include: arm: asm: io: add 64bit clrbits and setbits helpers   Simon Glass
• [U-Boot] [RFC PATCH 12/29] drivers: rtc: ds1337: add driver model support   Simon Glass
• [U-Boot] [RFC PATCH 13/29] arch: include: octeontx: add headers for OcteonTX   Simon Glass
• [U-Boot] [RFC PATCH 15/29] drivers: ata: ahci: update max id if it is more than available ports   Simon Glass
• [U-Boot] [RFC PATCH 14/29] arch: include: octeontx2: add headers for OcteonTX2   Simon Glass
• [U-Boot] [RFC PATCH 16/29] drivers: ata: ahci: fill upper 32bit buffer address in sg descriptor   Simon Glass
• [U-Boot] [RFC PATCH 17/29] drivers: ata: ahci: add BAR index quirk for OcteonTX   Simon Glass
• [U-Boot] [RFC PATCH 18/29] drivers: pci: add PCI controller driver for OcteonTX   Simon Glass
• [U-Boot] [RFC PATCH 19/29] drivers: gpio: add GPIO controller driver for OcteonTX   Simon Glass
• [U-Boot] [RFC PATCH 20/29] drivers: i2c: add I2C controller driver for OcteonTX   Simon Glass
• [U-Boot] [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX   Simon Glass
• [U-Boot] [PATCH v3 033/108] x86: power: Add an ACPI PMC uclass   Simon Glass
• [U-Boot] [PATCH v3 036/108] pci: Add support for p2sb uclass   Simon Glass
• [U-Boot] [PATCH v3 057/108] x86: fsp: Add FSP2 base support   Simon Glass
• [U-Boot] [PATCH v3 068/108] x86: Add an option to control the position of U-Boot   Simon Glass
• [U-Boot] [PATCH v3 082/108] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Simon Glass
• [U-Boot] [PATCH v3 083/108] spi: ich: Support of-platdata for fast-spi   Simon Glass
• [U-Boot] [PATCH v3 075/108] x86: spi: Don't enable SPI_FLASH_BAR by default   Simon Glass
• [U-Boot] [PATCH v3 081/108] spi: ich: Add mmio_base to struct ich_spi_platdata   Simon Glass
• [U-Boot] [PATCH v3 085/108] spi: ich: Add support for get_mmap() method   Simon Glass
• [U-Boot] [PATCH v3 086/108] spi: ich: Add TPL support   Simon Glass
• [U-Boot] [PATCH v3 000/108] x86: Add initial support for apollolake   Simon Glass
• [U-Boot] [PATCH v4 00/42] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v4 00/42] common: Further reduce common.h   Simon Glass
• [U-Boot] [PATCH v4 000/100] x86: Add initial support for apollolake   Simon Glass
• [U-Boot] [PATCH v4 001/100] binman: Add a library to access binman entries   Simon Glass
• [U-Boot] [PATCH v4 002/100] dm: gpio: Allow control of GPIO uclass in SPL   Simon Glass
• [U-Boot] [PATCH v4 003/100] dm: core: Fix offset_to_ofnode() with invalid offset   Simon Glass
• [U-Boot] [PATCH v4 004/100] dm: pci: Allow delaying auto-config until after relocation   Simon Glass
• [U-Boot] [PATCH v4 005/100] dm: pci: Move pci_get_devfn() into a common file   Simon Glass
• [U-Boot] [PATCH v4 006/100] net: Move the checksum functions to lib/   Simon Glass
• [U-Boot] [PATCH v4 007/100] i2c: designware: Tidy up PCI support   Simon Glass
• [U-Boot] [PATCH v4 008/100] i2c: designware: Avoid using static data   Simon Glass
• [U-Boot] [PATCH v4 009/100] i2c: designware: Support use in SPL   Simon Glass
• [U-Boot] [PATCH v4 010/100] x86: spi: Add helper functions for Intel Fast SPI   Simon Glass
• [U-Boot] [PATCH v4 011/100] fdt: Show the preprocessed .dts file on error   Simon Glass
• [U-Boot] [PATCH v4 012/100] board_r: Move early-timer init later   Simon Glass
• [U-Boot] [PATCH v4 013/100] RFC: sandbox: net: Suppress the MAC-address warnings   Simon Glass
• [U-Boot] [PATCH v4 014/100] Revert "RFC: sandbox: net: Suppress the MAC-address warnings"   Simon Glass
• [U-Boot] [PATCH v4 015/100] x86: timer: use a timer base of 0   Simon Glass
• [U-Boot] [PATCH v4 016/100] x86: timer: Reduce timer code size in TPL on Intel CPUs   Simon Glass
• [U-Boot] [PATCH v4 017/100] x86: Drop unnecessary cpu code for TPL   Simon Glass
• [U-Boot] [PATCH v4 018/100] x86: Drop unnecessary interrupt code for TPL   Simon Glass
• [U-Boot] [PATCH v4 019/100] x86: power: Add an ACPI PMC uclass   Simon Glass
• [U-Boot] [PATCH v4 020/100] x86: sandbox: Add a PMC emulator and test   Simon Glass
• [U-Boot] [PATCH v4 021/100] x86: power: Add a 'pmc' command   Simon Glass
• [U-Boot] [PATCH v4 022/100] pci: Add support for p2sb uclass   Simon Glass
• [U-Boot] [PATCH v4 023/100] sandbox: Disable mmio by default in tests   Simon Glass
• [U-Boot] [PATCH v4 024/100] sandbox: Add PCI driver and test for p2sb   Simon Glass
• [U-Boot] [PATCH v4 025/100] x86: Move UCLASS_IRQ into a separate file   Simon Glass
• [U-Boot] [PATCH v4 026/100] sandbox: Add a test for IRQ   Simon Glass
• [U-Boot] [PATCH v4 027/100] x86: Define the SPL image start   Simon Glass
• [U-Boot] [PATCH v4 028/100] x86: Reduce mrccache record alignment size   Simon Glass
• [U-Boot] [PATCH v4 029/100] x86: Correct mrccache find_next_mrc_cache() calculation   Simon Glass
• [U-Boot] [PATCH v4 030/100] x86: Adjust mrccache_get_region() to use livetree   Simon Glass
• [U-Boot] [PATCH v4 031/100] x86: Adjust mrccache_get_region() to support get_mmap()   Simon Glass
• [U-Boot] [PATCH v4 032/100] x86: Add a new global_data member for the cache record   Simon Glass
• [U-Boot] [PATCH v4 033/100] x86: Tidy up error handling in mrccache_save()   Simon Glass
• [U-Boot] [PATCH v4 034/100] x86: Update mrccache to support multiple caches   Simon Glass
• [U-Boot] [PATCH v4 035/100] x86: Add mrccache support for a 'variable' cache   Simon Glass
• [U-Boot] [PATCH v4 036/100] x86: Don't export mrccache_update()   Simon Glass
• [U-Boot] [PATCH v4 037/100] x86: Move fsp_prepare_mrc_cache() to fsp1 directory   Simon Glass
• [U-Boot] [PATCH v4 038/100] x86: Set the DRAM banks to reflect real location   Simon Glass
• [U-Boot] [PATCH v4 039/100] x86: Set up the MTRR for SDRAM   Simon Glass
• [U-Boot] [PATCH v4 040/100] x86: Don't imply libfdt or SPI flash in TPL   Simon Glass
• [U-Boot] [PATCH v4 041/100] x86: Allow removal of standard PCH drivers   Simon Glass
• [U-Boot] [PATCH v4 042/100] x86: Allow interrupt to happen once   Simon Glass
• [U-Boot] [PATCH v4 043/100] x86: fsp: Make graphics support common to FSP1/2   Simon Glass
• [U-Boot] [PATCH v4 044/100] x86: fsp: Correct wrong header inlude in fsp_support.c   Simon Glass
• [U-Boot] [PATCH v4 045/100] x86: fsp: Add FSP2 base support   Simon Glass
• [U-Boot] [PATCH v4 046/100] x86: fsp: Set up an MTRR for the graphics frame buffer   Simon Glass
• [U-Boot] [PATCH v4 047/100] x86: fsp: Add a new arch_fsp_init_r() hook   Simon Glass
• [U-Boot] [PATCH v4 048/100] x86: fsp: Allow remembering the location of FSP-S   Simon Glass
• [U-Boot] [PATCH v4 049/100] x86: fsp: Make the notify API call common   Simon Glass
• [U-Boot] [PATCH v4 050/100] x86: Don't include the BIOS emulator in TPL   Simon Glass
• [U-Boot] [PATCH v4 051/100] x86: Add an option to include a FIT   Simon Glass
• [U-Boot] [PATCH v4 052/100] x86: Add support for newer CAR schemes   Simon Glass
• [U-Boot] [PATCH v4 053/100] x86: Disable microcode section for FSP2   Simon Glass
• [U-Boot] [PATCH v4 054/100] x86: Update the fsp command for FSP2   Simon Glass
• [U-Boot] [PATCH v4 055/100] x86: Update .dtsi file for FSP2   Simon Glass
• [U-Boot] [PATCH v4 056/100] x86: Add an option to control the position of U-Boot   Simon Glass
• [U-Boot] [PATCH v4 057/100] x86: Add an option to control the position of SPL   Simon Glass
• [U-Boot] [PATCH v4 058/100] x86: Add an fdtmap and image-header   Simon Glass
• [U-Boot] [PATCH v4 059/100] x86: Don't repeat microcode in U-Boot if not needed   Simon Glass
• [U-Boot] [PATCH v4 060/100] x86: Separate out U-Boot and device tree in ROM image   Simon Glass
• [U-Boot] [PATCH v4 061/100] x86: Make MSR_PKG_POWER_SKU common   Simon Glass
• [U-Boot] [PATCH v4 062/100] spi: Correct operations check in dm_spi_xfer()   Simon Glass
• [U-Boot] [PATCH v4 063/100] x86: spi: Don't enable SPI_FLASH_BAR by default   Simon Glass
• [U-Boot] [PATCH v4 064/100] spi: ich: Move init function just above probe()   Simon Glass
• [U-Boot] [PATCH v4 065/100] spi: ich: Move the protection/lockdown code into a function   Simon Glass
• [U-Boot] [PATCH v4 066/100] spi: ich: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v4 067/100] spi: ich: Fix header order   Simon Glass
• [U-Boot] [PATCH v4 068/100] spi: ich: Various small tidy-ups   Simon Glass
• [U-Boot] [PATCH v4 069/100] spi: ich: Add mmio_base to struct ich_spi_platdata   Simon Glass
• [U-Boot] [PATCH v4 070/100] dm: doc: Add a note about of-platdata and header files   Simon Glass
• [U-Boot] [PATCH v4 071/100] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Simon Glass
• [U-Boot] [PATCH v4 072/100] spi: ich: Support of-platdata for fast-spi   Simon Glass
• [U-Boot] [PATCH v4 073/100] spi: ich: Support hardware sequencing   Simon Glass
• [U-Boot] [PATCH v4 074/100] spi: ich: Add support for get_mmap() method   Simon Glass
• [U-Boot] [PATCH v4 075/100] spi: ich: Add TPL support   Simon Glass
• [U-Boot] [PATCH v4 076/100] spi: ich: Add Apollo Lake support   Simon Glass
• [U-Boot] [PATCH v4 077/100] mtd: spi: Export spi_flash_std_probe()   Simon Glass
• [U-Boot] [PATCH v4 078/100] x86: Enable pinctrl in SPL and TPL   Simon Glass
• [U-Boot] [PATCH v4 079/100] x86: Add low-power subsystem (lpss) support   Simon Glass
• [U-Boot] [PATCH v4 080/100] x86: Add a generic Intel pinctrl driver   Simon Glass
• [U-Boot] [PATCH v4 081/100] x86: Add a generic Intel GPIO driver   Simon Glass
• [U-Boot] [PATCH v4 082/100] x86: apl: Add basic IO addresses   Simon Glass
• [U-Boot] [PATCH v4 083/100] x86: apl: Add PMC driver   Simon Glass
• [U-Boot] [PATCH v4 084/100] x86: apl: Add UART driver   Simon Glass
• [U-Boot] [PATCH v4 085/100] x86: apl: Add pinctrl driver   Simon Glass
• [U-Boot] [PATCH v4 086/100] i2c: designware: Add Apollo Lake support   Simon Glass
• [U-Boot] [PATCH v4 087/100] x86: apl: Add systemagent driver   Simon Glass
• [U-Boot] [PATCH v4 088/100] x86: apl: Add hostbridge driver   Simon Glass
• [U-Boot] [PATCH v4 089/100] x86: apl: Add ITSS driver   Simon Glass
• [U-Boot] [PATCH v4 090/100] x86: apl: Add LPC driver   Simon Glass
• [U-Boot] [PATCH v4 091/100] x86: apl: Add PCH driver   Simon Glass
• [U-Boot] [PATCH v4 092/100] x86: apl: Add PUNIT driver   Simon Glass
• [U-Boot] [PATCH v4 093/100] x86: apl: Add SPL loaders   Simon Glass
• [U-Boot] [PATCH v4 094/100] x86: apl: Add a CPU driver   Simon Glass
• [U-Boot] [PATCH v4 095/100] x86: apl: Add SPL/TPL init   Simon Glass
• [U-Boot] [PATCH v4 096/100] x86: apl: Add P2SB driver   Simon Glass
• [U-Boot] [PATCH v4 097/100] x86: apl: Add Kconfig and Makefile   Simon Glass
• [U-Boot] [PATCH v4 098/100] x86: apl: Add FSP structures   Simon Glass
• [U-Boot] [PATCH v4 099/100] x86: apl: Add FSP support   Simon Glass
• [U-Boot] [PATCH v4 100/100] x86: Add chromebook_coral   Simon Glass
• [U-Boot] [PATCH v4 000/100] x86: Add initial support for apollolake   Simon Glass
• [U-Boot] [PATCH v5 000/101] x86: Add initial support for apollolake   Simon Glass
• [U-Boot] [PATCH v5 001/101] binman: Add a library to access binman entries   Simon Glass
• [U-Boot] [PATCH v5 002/101] dm: gpio: Allow control of GPIO uclass in SPL   Simon Glass
• [U-Boot] [PATCH v5 003/101] dm: core: Fix offset_to_ofnode() with invalid offset   Simon Glass
• [U-Boot] [PATCH v5 004/101] dm: pci: Allow delaying auto-config until after relocation   Simon Glass
• [U-Boot] [PATCH v5 005/101] dm: pci: Move pci_get_devfn() into a common file   Simon Glass
• [U-Boot] [PATCH v5 006/101] net: Move the checksum functions to lib/   Simon Glass
• [U-Boot] [PATCH v5 007/101] i2c: designware: Tidy up PCI support   Simon Glass
• [U-Boot] [PATCH v5 008/101] i2c: designware: Avoid using static data   Simon Glass
• [U-Boot] [PATCH v5 009/101] i2c: designware: Support use in SPL   Simon Glass
• [U-Boot] [PATCH v5 010/101] x86: spi: Add helper functions for Intel Fast SPI   Simon Glass
• [U-Boot] [PATCH v5 011/101] fdt: Show the preprocessed .dts file on error   Simon Glass
• [U-Boot] [PATCH v5 012/101] board_r: Move early-timer init later   Simon Glass
• [U-Boot] [PATCH v5 013/101] RFC: sandbox: net: Suppress the MAC-address warnings   Simon Glass
• [U-Boot] [PATCH v5 014/101] Revert "RFC: sandbox: net: Suppress the MAC-address warnings"   Simon Glass
• [U-Boot] [PATCH v5 015/101] x86: timer: use a timer base of 0   Simon Glass
• [U-Boot] [PATCH v5 016/101] x86: timer: Reduce timer code size in TPL on Intel CPUs   Simon Glass
• [U-Boot] [PATCH v5 017/101] x86: Drop unnecessary cpu code for TPL   Simon Glass
• [U-Boot] [PATCH v5 018/101] x86: Drop unnecessary interrupt code for TPL   Simon Glass
• [U-Boot] [PATCH v5 019/101] x86: power: Add an ACPI PMC uclass   Simon Glass
• [U-Boot] [PATCH v5 020/101] x86: sandbox: Add a PMC emulator and test   Simon Glass
• [U-Boot] [PATCH v5 021/101] x86: power: Add a 'pmc' command   Simon Glass
• [U-Boot] [PATCH v5 022/101] pci: Add support for p2sb uclass   Simon Glass
• [U-Boot] [PATCH v5 023/101] sandbox: Disable mmio by default in tests   Simon Glass
• [U-Boot] [PATCH v5 024/101] sandbox: Add PCI driver and test for p2sb   Simon Glass
• [U-Boot] [PATCH v5 025/101] x86: Move UCLASS_IRQ into a separate file   Simon Glass
• [U-Boot] [PATCH v5 026/101] sandbox: Add a test for IRQ   Simon Glass
• [U-Boot] [PATCH v5 027/101] x86: Define the SPL image start   Simon Glass
• [U-Boot] [PATCH v5 028/101] x86: Reduce mrccache record alignment size   Simon Glass
• [U-Boot] [PATCH v5 029/101] x86: Correct mrccache find_next_mrc_cache() calculation   Simon Glass
• [U-Boot] [PATCH v5 030/101] x86: Adjust mrccache_get_region() to use livetree   Simon Glass
• [U-Boot] [PATCH v5 031/101] x86: Adjust mrccache_get_region() to support get_mmap()   Simon Glass
• [U-Boot] [PATCH v5 032/101] x86: Add a new global_data member for the cache record   Simon Glass
• [U-Boot] [PATCH v5 033/101] x86: Tidy up error handling in mrccache_save()   Simon Glass
• [U-Boot] [PATCH v5 034/101] x86: Update mrccache to support multiple caches   Simon Glass
• [U-Boot] [PATCH v5 035/101] x86: Add mrccache support for a 'variable' cache   Simon Glass
• [U-Boot] [PATCH v5 036/101] x86: Don't export mrccache_update()   Simon Glass
• [U-Boot] [PATCH v5 037/101] x86: Move fsp_prepare_mrc_cache() to fsp1 directory   Simon Glass
• [U-Boot] [PATCH v5 038/101] x86: Set the DRAM banks to reflect real location   Simon Glass
• [U-Boot] [PATCH v5 039/101] x86: Set up the MTRR for SDRAM   Simon Glass
• [U-Boot] [PATCH v5 040/101] x86: Don't imply libfdt or SPI flash in TPL   Simon Glass
• [U-Boot] [PATCH v5 041/101] x86: Allow removal of standard PCH drivers   Simon Glass
• [U-Boot] [PATCH v5 042/101] x86: Allow interrupt to happen once   Simon Glass
• [U-Boot] [PATCH v5 043/101] x86: fsp: Make graphics support common to FSP1/2   Simon Glass
• [U-Boot] [PATCH v5 044/101] x86: fsp: Correct wrong header inlude in fsp_support.c   Simon Glass
• [U-Boot] [PATCH v5 045/101] x86: fsp: Add FSP2 base support   Simon Glass
• [U-Boot] [PATCH v5 046/101] x86: fsp: Set up an MTRR for the graphics frame buffer   Simon Glass
• [U-Boot] [PATCH v5 047/101] x86: fsp: Add a new arch_fsp_init_r() hook   Simon Glass
• [U-Boot] [PATCH v5 048/101] x86: fsp: Allow remembering the location of FSP-S   Simon Glass
• [U-Boot] [PATCH v5 049/101] x86: fsp: Make the notify API call common   Simon Glass
• [U-Boot] [PATCH v5 050/101] x86: Don't include the BIOS emulator in TPL   Simon Glass
• [U-Boot] [PATCH v5 051/101] x86: Add an option to include a FIT   Simon Glass
• [U-Boot] [PATCH v5 052/101] x86: Add support for newer CAR schemes   Simon Glass
• [U-Boot] [PATCH v5 053/101] x86: Disable microcode section for FSP2   Simon Glass
• [U-Boot] [PATCH v5 054/101] x86: Update the fsp command for FSP2   Simon Glass
• [U-Boot] [PATCH v5 055/101] x86: Update .dtsi file for FSP2   Simon Glass
• [U-Boot] [PATCH v5 056/101] x86: Add an option to control the position of U-Boot   Simon Glass
• [U-Boot] [PATCH v5 057/101] x86: Add an option to control the position of SPL   Simon Glass
• [U-Boot] [PATCH v5 058/101] x86: Add an fdtmap and image-header   Simon Glass
• [U-Boot] [PATCH v5 059/101] x86: Don't repeat microcode in U-Boot if not needed   Simon Glass
• [U-Boot] [PATCH v5 060/101] x86: Separate out U-Boot and device tree in ROM image   Simon Glass
• [U-Boot] [PATCH v5 061/101] x86: Make MSR_PKG_POWER_SKU common   Simon Glass
• [U-Boot] [PATCH v5 062/101] spi: Correct operations check in dm_spi_xfer()   Simon Glass
• [U-Boot] [PATCH v5 063/101] x86: spi: Don't enable SPI_FLASH_BAR by default   Simon Glass
• [U-Boot] [PATCH v5 064/101] spi: ich: Move init function just above probe()   Simon Glass
• [U-Boot] [PATCH v5 065/101] spi: ich: Move the protection/lockdown code into a function   Simon Glass
• [U-Boot] [PATCH v5 066/101] spi: ich: Convert to livetree   Simon Glass
• [U-Boot] [PATCH v5 067/101] spi: ich: Fix header order   Simon Glass
• [U-Boot] [PATCH v5 068/101] spi: ich: Various small tidy-ups   Simon Glass
• [U-Boot] [PATCH v5 069/101] spi: ich: Add mmio_base to struct ich_spi_platdata   Simon Glass
• [U-Boot] [PATCH v5 070/101] dm: doc: Add a note about of-platdata and header files   Simon Glass
• [U-Boot] [PATCH v5 071/101] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Simon Glass
• [U-Boot] [PATCH v5 072/101] spi: ich: Support of-platdata for fast-spi   Simon Glass
• [U-Boot] [PATCH v5 073/101] spi: ich: Support hardware sequencing   Simon Glass
• [U-Boot] [PATCH v5 074/101] spi: ich: Add support for get_mmap() method   Simon Glass
• [U-Boot] [PATCH v5 075/101] spi: ich: Add TPL support   Simon Glass
• [U-Boot] [PATCH v5 076/101] spi: ich: Add Apollo Lake support   Simon Glass
• [U-Boot] [PATCH v5 077/101] mtd: spi: Export spi_flash_std_probe()   Simon Glass
• [U-Boot] [PATCH v5 078/101] x86: Enable pinctrl in SPL and TPL   Simon Glass
• [U-Boot] [PATCH v5 079/101] x86: Add low-power subsystem (lpss) support   Simon Glass
• [U-Boot] [PATCH v5 080/101] x86: Add a generic Intel pinctrl driver   Simon Glass
• [U-Boot] [PATCH v5 081/101] x86: Add a generic Intel GPIO driver   Simon Glass
• [U-Boot] [PATCH v5 082/101] x86: Move qemu CPU fixup function into its own file   Simon Glass
• [U-Boot] [PATCH v5 083/101] x86: apl: Add basic IO addresses   Simon Glass
• [U-Boot] [PATCH v5 084/101] x86: apl: Add PMC driver   Simon Glass
• [U-Boot] [PATCH v5 085/101] x86: apl: Add UART driver   Simon Glass
• [U-Boot] [PATCH v5 086/101] x86: apl: Add pinctrl driver   Simon Glass
• [U-Boot] [PATCH v5 087/101] i2c: designware: Add Apollo Lake support   Simon Glass
• [U-Boot] [PATCH v5 088/101] x86: apl: Add systemagent driver   Simon Glass
• [U-Boot] [PATCH v5 089/101] x86: apl: Add hostbridge driver   Simon Glass
• [U-Boot] [PATCH v5 090/101] x86: apl: Add ITSS driver   Simon Glass
• [U-Boot] [PATCH v5 091/101] x86: apl: Add LPC driver   Simon Glass
• [U-Boot] [PATCH v5 092/101] x86: apl: Add PCH driver   Simon Glass
• [U-Boot] [PATCH v5 093/101] x86: apl: Add PUNIT driver   Simon Glass
• [U-Boot] [PATCH v5 094/101] x86: apl: Add SPL loaders   Simon Glass
• [U-Boot] [PATCH v5 095/101] x86: apl: Add a CPU driver   Simon Glass
• [U-Boot] [PATCH v5 096/101] x86: apl: Add SPL/TPL init   Simon Glass
• [U-Boot] [PATCH v5 097/101] x86: apl: Add P2SB driver   Simon Glass
• [U-Boot] [PATCH v5 098/101] x86: apl: Add Kconfig and Makefile   Simon Glass
• [U-Boot] [PATCH v5 099/101] x86: apl: Add FSP structures   Simon Glass
• [U-Boot] [PATCH v5 100/101] x86: apl: Add FSP support   Simon Glass
• [U-Boot] [PATCH v5 101/101] x86: Add chromebook_coral   Simon Glass
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Simon Glass
• [U-Boot] [PATCH v5 007/101] i2c: designware: Tidy up PCI support   Simon Glass
• [U-Boot] [PATCH v5 009/101] i2c: designware: Support use in SPL   Simon Glass
• [U-Boot] [PATCH v5 012/101] board_r: Move early-timer init later   Simon Glass
• [U-Boot] [PATCH v5 013/101] RFC: sandbox: net: Suppress the MAC-address warnings   Simon Glass
• [U-Boot] [PATCH v5 024/101] sandbox: Add PCI driver and test for p2sb   Simon Glass
• [U-Boot] [PATCH v5 045/101] x86: fsp: Add FSP2 base support   Simon Glass
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Simon Glass
• [U-Boot] [PATCH v5 045/101] x86: fsp: Add FSP2 base support   Simon Glass
• [U-Boot] [PATCH v5 071/101] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Simon Glass
• [U-Boot] [PATCH v5 073/101] spi: ich: Support hardware sequencing   Simon Glass
• [U-Boot] [PATCH v5 075/101] spi: ich: Add TPL support   Simon Glass
• [U-Boot] [PATCH v5 078/101] x86: Enable pinctrl in SPL and TPL   Simon Glass
• [U-Boot] [PATCH v5 073/101] spi: ich: Support hardware sequencing   Simon Glass
• [U-Boot] Sharing a hardware lab   Simon Glass
• [U-Boot] [PATCH] usb: increase USB control timeout value   Christian Gmeiner
• [U-Boot] [PATCH] net: ftgmac100: align RX/TX descriptors on ARCH_DMA_MINALIGN   Cédric Le Goater
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH] ARM: omapl138_lcdk: Shrink code size by building with Thumb   Bartosz Golaszewski
• [U-Boot] [PATCH] ARM: omapl138_lcdk: Allow early init to start instruction cache   Bartosz Golaszewski
• [U-Boot] [PATCH 1/3] ARM: omapl138_lcdk: Separate BSS in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH 2/3] ARM: omapl138_lcdk: Increase malloc pool before relocation   Bartosz Golaszewski
• [U-Boot] [PATCH 3/3] ARM: omapl138_lcdk: Enable SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE   Bartosz Golaszewski
• [U-Boot] [PATCH] scripts: dtc: ignore files generated generated by python   Bartosz Golaszewski
• [U-Boot] [PATCH] ARM: dts: da850-lcdk: Update DTS files for SPL device tree support   Bartosz Golaszewski
• [U-Boot] [PATCH 0/4] omapl138_lcdk: fix MMC boot   Bartosz Golaszewski
• [U-Boot] [PATCH 1/4] mmc: davinci: drop support for ti,dm6441-mmc   Bartosz Golaszewski
• [U-Boot] [PATCH 2/4] mmc: davinci: drop struct davinci_mmc_plat   Bartosz Golaszewski
• [U-Boot] [PATCH 3/4] board: omapl138_lcdk: add the mmc device to SPL   Bartosz Golaszewski
• [U-Boot] [PATCH 4/4] mmc: davinci: fix mmc boot in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH v4 2/4] arm: socfpga: Convert reset manager from struct to defines   Simon Goldschmidt
• [U-Boot] [PATCH 1/1] net: avoid address-of-packed-member error   Simon Goldschmidt
• [U-Boot] [PATCHv2 0/4] support remote system update on Intel Stratix10 SoC   Simon Goldschmidt
• [U-Boot] [PATCH 1/1] net: avoid address-of-packed-member error   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error   Simon Goldschmidt
• [U-Boot] [PATCH v1 2/3] drivers: reset: Add a managed API to get reset controllers from the DT   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] spi: cadence_qspi: Move to spi-mem framework   Simon Goldschmidt
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Simon Goldschmidt
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Simon Goldschmidt
• [U-Boot] [PATCH V2 1/3] watchdog: designware: Migrate CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Simon Goldschmidt
• [U-Boot] [PATCH V2 2/3] watchdog: designware: Convert to DM and DT probing   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/4] usb: host: dwc2: use driver model for PHY and CLOCK   Simon Goldschmidt
• [U-Boot] [PATCH v2] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH] env: Access Environment in SPI flashes before relocation   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/4] usb: host: dwc2: use driver model for PHY and CLOCK   Simon Goldschmidt
• [U-Boot] [PATCH v2] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH] env: Access Environment in SPI flashes before relocation   Simon Goldschmidt
• [U-Boot] [PATCH] spl: fix stack usage check if gd is not initialized   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/5] dm: clk: add stub for clk_disable_bulk when CONFIG_CLK is desactivated   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] usb: composite: fix possible alignment issues   Simon Goldschmidt
• [U-Boot] [PATCH 2/2] usb: dwc2: fix possible alignment issues   Simon Goldschmidt
• [U-Boot] [PATCH v6 2/4] arm: socfpga: Convert reset manager from struct to defines   Simon Goldschmidt
• [U-Boot] [PATCH v6 3/4] arm: socfpga: Convert system manager from struct to defines   Simon Goldschmidt
• [U-Boot] [PATCH v6 4/4] arm: socfpga: Convert clock manager from struct to defines   Simon Goldschmidt
• [U-Boot] [PATCH v6 07/19] arm: socfpga: Move Stratix10 and Agilex clock manager common code   Simon Goldschmidt
• [U-Boot] [PATCH v6 08/19] arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHz   Simon Goldschmidt
• [U-Boot] [PATCH v6 13/19] ddr: altera: Restructure Stratix 10 SDRAM driver   Simon Goldschmidt
• [U-Boot] [PATCH v6 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [PATCH v6 19/19] arm: socfpga: agilex: Enable Agilex SoC build   Simon Goldschmidt
• [U-Boot] [PULL] u-boot-socfpga/master   Simon Goldschmidt
• [U-Boot] U-Boot for the Socfpga Arria10 board   Simon Goldschmidt
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Simon Goldschmidt
• [U-Boot] MULTI_DTB_FIT_GZIP   Simon Goldschmidt
• [U-Boot] [PATCH v6 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/2] spi: cadence-qspi: Move to spi-mem APIs   Simon Goldschmidt
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Simon Goldschmidt
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Simon Goldschmidt
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Simon Goldschmidt
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [RESEND PATCH v3] spi: cadence_qspi: support DM_CLK   Simon Goldschmidt
• [U-Boot] [BUG] usb: drivers/usb/gadget/composite.c fails to build   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] ARM: socfpga: Actually put bridges into reset on Gen5 in bridge disable   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Introduce u-boot-with-nand-spl.sfp target   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: add kernel parameter for immediate reboot   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] usb: composite: fix possible alignment issues   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/2] usb: dwc2: fix possible alignment issues   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Simon Goldschmidt
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Simon Goldschmidt
• [U-Boot] [PATCH v7 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [PATCH v7 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/3] env: Tidy up some of the env code   Simon Goldschmidt
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [PATCH v8 18/19] configs: socfpga: Move Stratix10 and Agilex common CONFIGs   Simon Goldschmidt
• [U-Boot] Using sspi for hardware detection?   Simon Goldschmidt
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Simon Goldschmidt
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Simon Goldschmidt
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Simon Goldschmidt
• [U-Boot] Using sspi for hardware detection?   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Simon Goldschmidt
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Simon Goldschmidt
• [U-Boot] [PATCH v1] gcc-9: silence 'address-of-packed-member' warning   Simon Goldschmidt
• [U-Boot] [PATCHv2 0/4] support remote system update on Intel Stratix10 SoC   Richard Gong
• [U-Boot] [PATCH v3 1/4] rpi: push fw_dtb_pointer in the .data section   Alexander Graf
• [U-Boot] [PATCH v3 3/4] ARM: bcm283x: Set rpi_bcm283x_base at run-time   Alexander Graf
• [U-Boot] [PATCH v3 4/4] ARM: bcm283x: Set memory map at run-time   Alexander Graf
• [U-Boot] U-Boot for the Socfpga Arria10 board   Wolfgang Grandegger
• [U-Boot] [PATCH v5 17/26] configs: socfpga: mcvevk: Remove useless UBI infos   Wolfgang Grandegger
• [U-Boot] Please pull u-boot-video   Anatolij Gustschin
• [U-Boot] [PATCH] imx: sys_proto: Fixing function imx6_is_bmode_from_gpr9()   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video   Anatolij Gustschin
• [U-Boot] [PATCH] video: mxsfb: Configure the clock after eLCDIF reset   Anatolij Gustschin
• [U-Boot] [PATCH] video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support   Anatolij Gustschin
• [U-Boot] [PATCH v4 0/5] Extend mv88e61xx driver to support 88E6071   Anatolij Gustschin
• [U-Boot] [PATCH] Revert "video: mxsfb: Configure the clock after eLCDIF reset"   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video   Anatolij Gustschin
• [U-Boot] `uclass_find_device_by_name` fails to find the device   Nandor Han
• [U-Boot] [PATCH 0/4] ARM: imx6: DHCOM i.MX6 PDK: Fixing reset   Robert Hancock
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Robert Hancock
• [U-Boot] [PATCH] arm: add acpi support for the arm   Steven Hao
• [U-Boot] [PATCH v2] arm: add acpi support for the arm   Steven Hao
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Steven Hao
• [U-Boot] [PATCH] arm: add acpi support for the arm   Steven Hao
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Steven Hao
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Steven Hao
• [U-Boot] 回复: [PATCH v3] arm: add acpi support for the arm   Steven Hao
• [U-Boot] [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX   Tim Harvey
• [U-Boot] [EXT] Re: [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX   Tim Harvey
• [U-Boot] SPL NAND FIT support working?   Tim Harvey
• [U-Boot] SPL NAND FIT support working?   Tim Harvey
• [U-Boot] [RFC PATCH] spl: nand: use nand pagesize to fix loading FIT images   Tim Harvey
• [U-Boot] MULTI_DTB_FIT_GZIP   Tim Harvey
• [U-Boot] [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX   Tim Harvey
• [U-Boot] MULTI_DTB_FIT_GZIP   Tim Harvey
• [U-Boot] [v4] armv8: ls1028ardb: enable DisplayPort Power support   Wen He
• [U-Boot] [v2] armv8: ls1043aqds: modify the qspi_bootcmd definition   Wen He
• [U-Boot] [v2] armv8: ls1028a: disable multimedia feature when not supported   Wen He
• [U-Boot] [v3] armv8: ls1028a: disable multimedia feature when not supported   Wen He
• [U-Boot] [u-boot] [v4] armv8: ls1028ardb: enable DisplayPort Power support   Wen He
• [U-Boot] [v5] armv8: ls1028ardb: enable DisplayPort Power support   Wen He
• [U-Boot] [v4] armv8: ls1028a: disable multimedia feature when not supported   Wen He
• [U-Boot] [PATCH 1/2] cosmetic: Fix spelling and whitespace errors   Thomas Hebb
• [U-Boot] [PATCH 2/2] Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"   Thomas Hebb
• [U-Boot] [PATCH 1/3] Kconfig: disambiguate config names for tiny printf   Thomas Hebb
• [U-Boot] [PATCH 2/3] Kconfig: add description for TPL_ROCKCHIP_COMMON_BOARD   Thomas Hebb
• [U-Boot] [PATCH 3/3] Kconfig: make TPL_DM_SERIAL depend on TPL_DM   Thomas Hebb
• [U-Boot] [PATCH 1/3] Makefile: don't try to construct CLEAN_FILES based on config   Thomas Hebb
• [U-Boot] [PATCH 2/3] Makefile: consolidate hardcoded lists of files to clean   Thomas Hebb
• [U-Boot] [PATCH 3/3] Makefile: add Rockchip idbloader.img to CLEAN_FILES   Thomas Hebb
• [U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering   Thomas Hebb
• [U-Boot] [PATCH 2/2] rockchip: imply instead of selecting SPL_SYS_MALLOC_SIMPLE   Thomas Hebb
• [U-Boot] [PATCH v2] cosmetic: Fix spelling and whitespace errors   Thomas Hebb
• [U-Boot] [PATCH v2 1/3] rockchip: fix ordering of DRAM init   Thomas Hebb
• [U-Boot] [PATCH v2 2/3] rockchip: allow DRAM init in SPL   Thomas Hebb
• [U-Boot] [PATCH v2 3/3] rockchip: imply instead of selecting SPL_SYS_MALLOC_SIMPLE   Thomas Hebb
• [U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering   Tom Hebb
• [U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering   Tom Hebb
• [U-Boot] Switch MVPP2 to use new MVMDIO - how do I move this along?   Nevo Hed
• [U-Boot] [PATCH 1/4] arm64: dts: sync Allwinner H6 files   Andre Heider
• [U-Boot] [PATCH 2/4] arm64: dts: sun50i: Add support for Orange Pi 3   Andre Heider
• [U-Boot] [PATCH 3/4] sunxi: board: Use eth_env_set_enetaddr_by_index()   Andre Heider
• [U-Boot] [PATCH 4/4] sunxi: board: fixup the BT address for Orange Pi 3   Andre Heider
• [U-Boot] [PATCH 4/4] sunxi: board: fixup the BT address for Orange Pi 3   Andre Heider
• [U-Boot] [PATCH 4/4] sunxi: board: fixup the BT address for Orange Pi 3   Andre Heider
• [U-Boot] [PATCH v2 0/4] arm64: dts: sun50i: Add support for Orange Pi 3   Andre Heider
• [U-Boot] [PATCH v2 1/4] sunxi: board: Use eth_env_set_enetaddr_by_index()   Andre Heider
• [U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Andre Heider
• [U-Boot] [PATCH v2 3/4] arm64: dts: sync Allwinner H6 files   Andre Heider
• [U-Boot] [PATCH v2 4/4] arm64: dts: sun50i: Add support for Orange Pi 3   Andre Heider
• [U-Boot] [PATCH v2 1/4] sunxi: board: Use eth_env_set_enetaddr_by_index()   Andre Heider
• [U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Andre Heider
• [U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Andre Heider
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Claudius Heine
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Claudius Heine
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Claudius Heine
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Claudius Heine
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Claudius Heine
• [U-Boot] [PATCH] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Claudius Heine
• [U-Boot] [PATCH] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Claudius Heine
• [U-Boot] [PATCH 0/4] ARM: imx6: DHCOM i.MX6 PDK: Fixing reset   Claudius Heine
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Claudius Heine
• [U-Boot] [PATCH 2/4] ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver   Claudius Heine
• [U-Boot] [PATCH 3/4] ARM: imx6: DHCOM i.MX6 PDK: Enable wdt command   Claudius Heine
• [U-Boot] [PATCH 4/4] ARM: imx6: DHCOM i.MX6 PDK: Use HW_WATCHDOG in SPL   Claudius Heine
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Claudius Heine
• [U-Boot] [PATCH 0/4] ARM: imx6: DHCOM i.MX6 PDK: Fixing reset   Claudius Heine
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Claudius Heine
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Claudius Heine
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Claudius Heine
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Claudius Heine
• [U-Boot] [PATCH v2 0/2] ARM: imx6: DHCOM i.MX6 PDK: Fixing reset   Claudius Heine
• [U-Boot] [PATCH v2 1/2] ARM: dts: dh-imx6: add u-boot specific wdt-reboot node   Claudius Heine
• [U-Boot] [PATCH v2 2/2] ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command   Claudius Heine
• [U-Boot] [PATCH 0/4] ARM: imx6: DHCOM i.MX6 PDK: Fixing reset   Claudius Heine
• [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error   Joe Hershberger
• [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0   Joe Hershberger
• [U-Boot] [PATCH v4 13/42] common: Move env_get_ip() to net.h   Joe Hershberger
• [U-Boot] [PATCHv2 2/5] env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check   Joe Hershberger
• [U-Boot] [PATCH 1/8] net: phy: ti: rename ti.c to dp83867.c   Joe Hershberger
• [U-Boot] [PATCH v2] cmd: remove NET and CMD_NET dependency for CMD_PXE   Joe Hershberger
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Joe Hershberger
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Joe Hershberger
• [U-Boot] [PATCH 2/8] net: phy: dp83867: move static initialization to .probe()   Joe Hershberger
• [U-Boot] [PATCH 3/8] dt-bindings: phy: dp83867: Add documentation for disabling clock output   Joe Hershberger
• [U-Boot] [PATCH 6/8] net: phy: dp83867: io impedance is not dependent on RGMII delay   Joe Hershberger
• [U-Boot] [PATCH 7/8] net: phy: dp83867: refactor rgmii configuration   Joe Hershberger
• [U-Boot] [PATCH 4/8] net: phy: dp83867: Add ability to disable output clock   Joe Hershberger
• [U-Boot] [RESEND PATCH] net: tftp: Fix tftp store address check in store_block()   Joe Hershberger
• [U-Boot] [PATCH 5/8] net: phy: dp83867: rework delay rgmii delay handling   Joe Hershberger
• [U-Boot] [PATCH 8/8] arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid   Joe Hershberger
• [U-Boot] [PATCH] Makefile: fix processing of default environment file   Joe Hershberger
• [U-Boot] [PATCH 1/1] env: Exit tools when invalid CRC found   Joe Hershberger
• [U-Boot] [PATCH v2] fw_setenv: avoid writing environment when nothing has changed   Joe Hershberger
• [U-Boot] [PATCH] env: Update env_addr for mmc environment driver   Joe Hershberger
• [U-Boot] [PATCH v3] Update MAINTAINERS to include environment files   Joe Hershberger
• [U-Boot] [PATCH 1/6] dma: Introduce dma_get_cfg() interface   Joe Hershberger
• [U-Boot] [PATCH 3/6] net: ti: am65-cpsw-nuss: Rework RX flow ID handling   Joe Hershberger
• [U-Boot] [PATCH 4/6] net: ti: am65-cpsw-nuss: Add new compatible for J721e   Joe Hershberger
• [U-Boot] [PATCH 5/6] arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes   Joe Hershberger
• [U-Boot] [PATCH 2/6] dma: ti: k3-udma: Implement dma_get_cfg() interface   Joe Hershberger
• [U-Boot] [PATCH 6/6] configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet   Joe Hershberger
• [U-Boot] [PATCH v4 013/100] RFC: sandbox: net: Suppress the MAC-address warnings   Joe Hershberger
• [U-Boot] [PATCH v4 1/5] net: phy: mv88e61xx: rework to enable detection of 88E6071 devices   Joe Hershberger
• [U-Boot] [PATCH v5 1/3] net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity   Joe Hershberger
• [U-Boot] [PATCH v5 2/3] net: mdio-uclass: add dm_eth_phy_connect helper function   Joe Hershberger
• [U-Boot] [PATCH v5 3/3] drivers: net: fsl_enetc: use the new MDIO DM helper functions   Joe Hershberger
• [U-Boot] [PATCH v3 01/11] include: phy: define XFI and USXGMII interface types   Joe Hershberger
• [U-Boot] [PATCH v3 02/11] include: phy: add data field for private driver data   Joe Hershberger
• [U-Boot] [PATCH v3 03/11] drivers: net: aquantia: use XFI, USXGMII interface types   Joe Hershberger
• [U-Boot] [PATCH v3 04/11] drivers: net: aquantia: add PHY generation information   Joe Hershberger
• [U-Boot] [PATCH v3 05/11] drivers: net: aquantia: set up SI protocol based on interface type   Joe Hershberger
• [U-Boot] [PATCH v3 06/11] drivers: net: aquantia: set MDI reversal based on DT property   Joe Hershberger
• [U-Boot] [PATCH v3 07/11] drivers: net: aquantia: set SMBus addr based on DT property   Joe Hershberger
• [U-Boot] [PATCH v3 08/11] drivers: net: aquantia: check system interface too when checking for link up   Joe Hershberger
• [U-Boot] [PATCH v3 09/11] doc: bindings: add bindings document for PHY nodes   Joe Hershberger
• [U-Boot] [PATCH v3 10/11] doc: bindings: Aquantia PHY node binding   Joe Hershberger
• [U-Boot] [PATCH v3 11/11] drivers: net: fsl_enetc: use XFI, USXGMII interface type macros   Joe Hershberger
• [U-Boot] [PATCH 1/3] drivers: net: fsl_enetc: Add 2.5Gbps to supported link speeds   Joe Hershberger
• [U-Boot] [PATCH 2/3] drivers: net: fsl_enetc: move PCS and PHY config to probe   Joe Hershberger
• [U-Boot] [PATCH 3/3] drivers: net: fsl_enetc_mdio: return with time-out if HW is stuck   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: fsl_enetc: register internal MDIO bus   Joe Hershberger
• [U-Boot] [PATCH v2 1/6] net: introduce DSA class for Ethernet switches   Joe Hershberger
• [U-Boot] [PATCH v4 1/5] net: mvpp2x: fix traffic stuck after PHY start error   Joe Hershberger
• [U-Boot] [PATCH v4 2/5] net: mvpp2: mark phy as invalid in case of missing appropriate driver   Joe Hershberger
• [U-Boot] [PATCH v4 3/5] arm: dts: armada-cp110-*dtsi: add xmdio nodes   Joe Hershberger
• [U-Boot] [PATCH v4 4/5] net: mvpp2: use new MVMDIO driver   Joe Hershberger
• [U-Boot] [PATCH v4 5/5] net: mvpp2: MVPP2 now needs MVMDIO   Joe Hershberger
• [U-Boot] [PATCH] net: rtl8169: Support RTL-8168c/8111c   Joe Hershberger
• [U-Boot] [PATCH] net: phy: Increase link up delay in genphy_update_link()   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: macb: let miiphy_read/_write pass arbitrary addresses   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: macb: explicitly pass phy_adr to mdio read and write   Joe Hershberger
• [U-Boot] [PATCH] net: eth-uclass: ignore unavailable devices   Joe Hershberger
• [U-Boot] [PATCH] phy: atheros: add some debug output   Joe Hershberger
• [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions   Joe Hershberger
• [U-Boot] [PATCH 2/9] phy: atheros: move delay config to common function   Joe Hershberger
• [U-Boot] [PATCH 3/9] phy: atheros: ar8035: remove extra delay config   Joe Hershberger
• [U-Boot] [PATCH 4/9] phy: atheros: ar8035: use phy_{read|write}_mmd()   Joe Hershberger
• [U-Boot] [PATCH 5/9] phy: atheros: don't overwrite debug register values   Joe Hershberger
• [U-Boot] [PATCH 6/9] phy: atheros: fix delay configuration   Joe Hershberger
• [U-Boot] [PATCH 7/9] phy: atheros: Add device tree bindings and config   Joe Hershberger
• [U-Boot] [PATCH 8/9] phy: atheros: ar8035: remove static clock config   Joe Hershberger
• [U-Boot] [PATCH 9/9] phy: atheros: consolidate {ar8031|ar8035}_config()   Joe Hershberger
• [U-Boot] [PATCH] net: phy: aquantia: wait for phy init sequence to finish   Joe Hershberger
• [U-Boot] [PATCH] net: phy: micrel: make sure the factory test bit is cleared   Joe Hershberger
• [U-Boot] [PATCH] net: ftgmac100: align RX/TX descriptors on ARCH_DMA_MINALIGN   Joe Hershberger
• [U-Boot] [PATCH] net: tftp: Fix too small block size   Joe Hershberger
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Joseph Hershberger
• [U-Boot] [PATCH v5 006/101] net: Move the checksum functions to lib/   Joseph Hershberger
• [U-Boot] [PATCH v1 2/3] drivers: reset: Add a managed API to get reset controllers from the DT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 3/5] regmap: Allow providing read/write callbacks through struct regmap_config   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 1/4] drivers: Add a new framework for multiplexer devices   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 2/4] dm: board: complete the initialization of the muxes in initr_dm()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 3/4] drivers: mux: mmio-based syscon mux controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/4] regmap: Add a managed API, custom read/write callbacks and support for regmap fields   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/4] regmap: Add devm_regmap_init()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/4] regmap: Add support for regmap fields   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 4/4] test: dm: Add tests for regmap managed API and regmap fields   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/4] drivers: Add a framework for MUX drivers   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/4] drivers: Add a new framework for multiplexer devices   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/4] dm: board: complete the initialization of the muxes in initr_dm()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/4] drivers: mux: mmio-based syscon mux controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 4/4] test: Add tests for the multiplexer framework   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/4] dm: board: complete the initialization of the muxes in initr_dm()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 2/3] drivers: reset: Add a managed API to get reset controllers from the DT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/4] drivers: mux: mmio-based syscon mux controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 1/5] dm: clk: add stub for clk_disable_bulk when CONFIG_CLK is desactivated   Jean-Jacques Hiblot
• [U-Boot] Using kernelCI infrastructure for firmware testing   Kevin Hilman
• [U-Boot] [PATCH v4 2/5] omap: mmc: Avoid using libfdt with of-platdata   Peter Howard
• [U-Boot] [PATCH] tools: env: handle corrupted ubi volumes during sanity check   Martin Hundebøll
• [U-Boot] [u-boot][PATCH v2] drivers/fsl-mc: Support DPSPARSER object and apply spb command   Florinel Iordache
• [U-Boot] [PATCH v2 0/8] Enablement of PCIe controller for lx2-rev2   Priyanka Jain
• [U-Boot] [PATCH 1/2] configs: ls1028a: Resync with savedefconfig   Priyanka Jain
• [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0   Priyanka Jain
• [U-Boot] [PATCH] armv8: fsl-layerscape: fix hwconfig and prefetching   Priyanka Jain
• [U-Boot] pull request u-boot-mpc85xx   Priyanka Jain
• [U-Boot] [PATCH v2] pci: add DM based mpc85xx driver   Priyanka Jain
• [U-Boot] [PATCH v2 0/9] powerpc: convert socrates board to DM   Priyanka Jain
• [U-Boot] [PATCH 1/2] freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name.   Priyanka Jain
• [U-Boot] [PATCH] armv8: fsl-layerscape: use IS_ENABLED()   Priyanka Jain
• [U-Boot] [PATCH 2/2] freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name.   Priyanka Jain
• [U-Boot] [PATCH] armv8: layerscape: set HWCONFIG_BUFFER_SIZE   Priyanka Jain
• [U-Boot] pull request u-boot-fsl-qoriq   Priyanka Jain
• [U-Boot] [PATCH] pci: layerscape: Only set EP CFG READY bit   Priyanka Jain
• [U-Boot] [PATCH 1/2] armv8: dts: ls1088a: add PSCI binding for LS1088A   Priyanka Jain
• [U-Boot] [PATCH 2/2] armv8: fsl-layerscape: do not use layerscape EFI reset if PSCI used   Priyanka Jain
• [U-Boot] [PATCH v2 1/6] armv8: fsl-layerscape: guard caam specific defines   Priyanka Jain
• [U-Boot] [PATCH] armv8: fsl-lsch3: convert CONFIG_TARGET_x to CONFIG_ARCH_x   Priyanka Jain
• [U-Boot] [PATCH] armv8: fsl-layerscape: introduce fsl_board_late_init()   Priyanka Jain
• [U-Boot] [PATCH] armv8: layerscape: set HWCONFIG_BUFFER_SIZE   Priyanka Jain
• [U-Boot] [PATCH 1/2] drivers: net: fsl_enetc: set phydev->node   Priyanka Jain
• [U-Boot] [PATCH 2/2] drivers: net: fsl_enetc: fix RGMII configuration   Priyanka Jain
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: fix warning if no hwconfig is defined   Priyanka Jain
• [U-Boot] [PATCH v2] configs: spi: Add the SPI_FLASH_BAR for ESPI   Priyanka Jain
• [U-Boot] [PATCH v2 1/2] freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name.   Priyanka Jain
• [U-Boot] [PATCH] armv8: layerscape: set HWCONFIG_BUFFER_SIZE   Priyanka Jain
• [U-Boot] [PATCH] include/configs: ls1012a: add pfe stop command before boot linux kernel   Priyanka Jain
• [U-Boot] [v2] include/configs: ls1012a: add pfe stop command   Priyanka Jain
• [U-Boot] [v2] armv8: ls1043aqds: modify the qspi_bootcmd definition   Priyanka Jain
• [U-Boot] [v2] armv8: ls1028a: disable multimedia feature when not supported   Priyanka Jain
• [U-Boot] [PATCH 01/42] configs: ls1012a: enable CONFIG_DM_I2C   Priyanka Jain
• [U-Boot] [PATCH 02/42] include/configs: arm: ls1012a: fix compilation error   Priyanka Jain
• [U-Boot] [PATCH 05/42] configs: ls1012a: enable CONFIG_DM_GPIO to fix compilation error   Priyanka Jain
• [U-Boot] [PATCH 06/42] gpio: do not include <asm/arch/gpio.h> for ARCH_LS1012A   Priyanka Jain
• [U-Boot] [PATCH 07/42] configs: ls1012a: enable CONFIG_DM_RTC   Priyanka Jain
• [U-Boot] [PATCH 08/42] board: freescale: ls1012aqds: support dm_i2c_* API   Priyanka Jain
• [U-Boot] [PATCH 09/42] include/configs: ls1012a_common: define default i2c bus   Priyanka Jain
• [U-Boot] [PATCH] configs: ls1028a: enable OF_LIBFDT_OVERLAY   Priyanka Jain
• [U-Boot] [PATCH 2/5] fsl: layerscape: guard *env_sf_get_env_addr() on CONFIG_ENV_IS_IN_SPI_FLASH   Priyanka Jain
• [U-Boot] [PATCH 4/5] T1042RDB_PI_NAND_SECURE_BOOT: SECURE_BOOT means environment is nowhere   Priyanka Jain
• [U-Boot] [PATCH 4/5] T1042RDB_PI_NAND_SECURE_BOOT: SECURE_BOOT means environment is nowhere   Priyanka Jain
• [U-Boot] [v2 2/2] ata: sata_sil: Add DM support for Silicon sata driver   Priyanka Jain
• [U-Boot] [PATCHv2 4/5] T1042RDB_PI_NAND_SECURE_BOOT: Guard t104xrdb SPL env code   Priyanka Jain
• [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: get clock directly from global data   Priyanka Jain
• [U-Boot] [PATCH 2/4] arm: ls1021a: drop redundant board_mmc_init()   Priyanka Jain
• [U-Boot] [PATCH 3/4] arm: drop eSDHC clock getting in mxc_get_clock() for layerscape   Priyanka Jain
• [U-Boot] [PATCH 4/4] mpc83xx: remove unused clock.h   Priyanka Jain
• [U-Boot] [v4] armv8: ls1028a: disable multimedia feature when not supported   Priyanka Jain
• [U-Boot] pull request u-boot-mpc85xx   Priyanka Jain
• [U-Boot] [V3 1/2] ata: fsl_sata: Add DM support for Freescale PowerPC SATA driver   Priyanka Jain
• [U-Boot] [v2 1/6] powerpc: p2041: dts: Add Sata DT nodes   Priyanka Jain
• [U-Boot] [PATCH] env: Update env_addr for mmc environment driver   Priyanka Jain
• [U-Boot] [PATCH] board_r: Detect ifc-nor flash at run-time   Priyanka Jain
• [U-Boot] [u-boot][PATCH v2] drivers/fsl-mc: Support DPSPARSER object and apply spb command   Priyanka Jain
• [U-Boot] [PATCH v3] Add TFA secure boot defconfig and Enables secure boot related configs in it.   Priyanka Jain
• [U-Boot] [PATCH v3 1/2] setexpr command is used while running secure boot (chain of trust with confidentiality) feature.   Priyanka Jain
• [U-Boot] [PATCH v3 2/2] Maximum size of secure boot header to be read from MMC is 12KB which spans across 0x20 blocks.   Priyanka Jain
• [U-Boot] [PATCH 1/2] configs: ls1028a: Resync with savedefconfig   Priyanka Jain
• [U-Boot] [PATCH v4] armv8: Add workaround for USB erratum A-050106   Priyanka Jain
• [U-Boot] [PATCH 2/2] configs: ls1028a: enable CMD_DM   Priyanka Jain
• [U-Boot] [PATCH] board: fsl: lx2160a: Fix the typo in board_fix_fdt   Priyanka Jain
• [U-Boot] [PATCH v3 1/3] spi: nxp_fspi: new driver for the FlexSPI controller   Priyanka Jain
• [U-Boot] [PATCH v4] armv8: Add workaround for USB erratum A-050106   Priyanka Jain
• [U-Boot] [PATCH] ppc/km: enable DM driver support in all defconfigs   Priyanka Jain
• [U-Boot] [PATCH v3] armv8: ls1046afrwy: Add support for LS1046AFRWY Rev B board   Priyanka Jain
• [U-Boot] pull request u-boot-mpc85xx   Priyanka Jain
• [U-Boot] [PATCH v3 01/20] arch: powerpc: add eSDHC node to p1020 dts   Priyanka Jain
• [U-Boot] [PATCH] configs/lx2160a: Add CONFIG_ENV_SECT_SIZE in defconfig   Priyanka Jain
• [U-Boot] [PATCH v2] armv8: layerscape: Manage PCIe EP compatible string via Kconfig   Priyanka Jain
• [U-Boot] [PATCH v4] configs/ls1046afrwy: Add TFA secure boot defconfig   Priyanka Jain
• [U-Boot] [PATCH v2 1/2] spi: nxp_fspi: new driver for the FlexSPI controller   Priyanka Jain
• [U-Boot] [U-Boot-Custodians] [RFC] Eliminate boards not using CONFIG_DM=y   Priyanka Jain
• [U-Boot] [PATCH 4/4] sunxi: board: fixup the BT address for Orange Pi 3   Ondřej Jirman
• [U-Boot] [PATCH 4/4] sunxi: board: fixup the BT address for Orange Pi 3   Ondřej Jirman
• [U-Boot] [PATCH] net: Always build the string_to_enetaddr() helper   Ondřej Jirman
• [U-Boot] [PATCH v2 1/4] sunxi: board: Use eth_env_set_enetaddr_by_index()   Ondřej Jirman
• [U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Ondřej Jirman
• [U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Ondřej Jirman
• [U-Boot] [PATCH v2 2/4] arm: sunxi: add a config option to fixup a Bluetooth address   Ondřej Jirman
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz, Foundries
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz, Foundries
• [U-Boot] [PATCH v2 5/5] sifive: fu540: Enable spi-nor flash support   Sagar Kadam
• [U-Boot] Working Principles of Mender (OTA) and Secure U-boot (HAB library)   Emre Karaaslan
• [U-Boot] Working Principles of Mender (OTA) and Secure U-boot (HAB library)   Emre Karaaslan
• [U-Boot] [PATCH v3 00/18] misc: Add AVS class 0 support for AM6   Keerthy
• [U-Boot] uboot environment in ubi on qspi flash   Alexander Kerner
• [U-Boot] [PATCH] rockchip: Fix spl boot order path of booting device   Mark Kettenis
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Mark Kettenis
• [U-Boot] [PATCH v2 0/8] Enablement of PCIe controller for lx2-rev2   Wasim Khan
• [U-Boot] [PATCH v2 1/8] drivers/pci : enable pcie_layerscape code for lx2-rev2   Wasim Khan
• [U-Boot] [PATCH v2 2/8] pci: layerscape: Add stream_id_cur field to ls_pcie structure   Wasim Khan
• [U-Boot] [PATCH v2 3/8] pci: layerscape: Suffix API names with _ls   Wasim Khan
• [U-Boot] [PATCH v2 4/8] pci: layerscape_gen4: Suffix API names with _ls_gen4   Wasim Khan
• [U-Boot] [PATCH v2 5/8] armv8: lx2160a: Add FSL_PEX_STREAM_ID_END for LX2160A   Wasim Khan
• [U-Boot] [PATCH v2 6/8] pci: layerscape: Common device tree fixup for NXP SoCs   Wasim Khan
• [U-Boot] [PATCH v2 7/8] pci: layerscape: Move streamId allocation to common device tree fixup   Wasim Khan
• [U-Boot] [PATCH v2 8/8] pci: layerscape: device tree fixup based on SoC and Version   Wasim Khan
• [U-Boot] [PATCH v3 0/9] Enablement of PCIe controller for lx2160a rev2   Wasim Khan
• [U-Boot] [PATCH v3 1/9] drivers/pci : enable pcie_layerscape code for lx2160a rev2   Wasim Khan
• [U-Boot] [PATCH v3 2/9] pci: layerscape: Add stream_id_cur field to ls_pcie structure   Wasim Khan
• [U-Boot] [PATCH v3 3/9] pci: layerscape: Suffix API names with _ls   Wasim Khan
• [U-Boot] [PATCH v3 4/9] pci: layerscape_gen4: Suffix API names with _ls_gen4   Wasim Khan
• [U-Boot] [PATCH v3 5/9] armv8: lx2160a: Add FSL_PEX_STREAM_ID_END for LX2160A   Wasim Khan
• [U-Boot] [PATCH v3 6/9] pci: layerscape: Common device tree fixup for NXP SoCs   Wasim Khan
• [U-Boot] [PATCH v3 7/9] pci: layerscape: Move streamId allocation to common device tree fixup   Wasim Khan
• [U-Boot] [PATCH v3 8/9] pci: layerscape: device tree fixup based on SoC and Version   Wasim Khan
• [U-Boot] [PATCH v3 9/9] configs: lx2160a: enable CONFIG_OF_BOARD_FIXUP for SECURE_BOOT defconfig   Wasim Khan
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Vasily Khoruzhick
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Vasily Khoruzhick
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Vasily Khoruzhick
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Vasily Khoruzhick
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Vasily Khoruzhick
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Vasily Khoruzhick
• [U-Boot] [PATCH] rockchip: rk3399: split rockpro64 out of evb_rk3399   Vasily Khoruzhick
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Vasily Khoruzhick
• [U-Boot] [PATCH] rockchip: rk3399: split rockpro64 out of evb_rk3399   Vasily Khoruzhick
• [U-Boot] [PATCH v2] rockchip: rk3399: split rockpro64 out of evb_rk3399   Vasily Khoruzhick
• [U-Boot] [PATCH v2] rockchip: rk3399: split rockpro64 out of evb_rk3399   Vasily Khoruzhick
• [U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support   Vasily Khoruzhick
• [U-Boot] [PATCH] power: fan53555: add support for Silergy SYR82X and SYR83X   Vasily Khoruzhick
• [U-Boot] [PATCH] rockchip: i2c: don't sent stop bit after each message   Vasily Khoruzhick
• [U-Boot] [PATCH] power: fan53555: fix fan53555_regulator_set_value   Vasily Khoruzhick
• [U-Boot] [PATCH] rockchip: i2c: don't sent stop bit after each message   Vasily Khoruzhick
• [U-Boot] [PATCH] power: fan53555: add support for Silergy SYR82X and SYR83X   Vasily Khoruzhick
• [U-Boot] Reboot is broken on RockPro64 with mainline u-boot and ATF   Vasily Khoruzhick
• [U-Boot] Reboot is broken on RockPro64 with mainline u-boot and ATF   Vasily Khoruzhick
• [U-Boot] Reboot is broken on RockPro64 with mainline u-boot and ATF   Vasily Khoruzhick
• [U-Boot] [PATCH v2 2/8] rockchip: rk3399: Support common spl_board_init   Vasily Khoruzhick
• [U-Boot] [PATCH 1/2] rockchip: rk3399: fix force power on reset   Vasily Khoruzhick
• [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Vasily Khoruzhick
• [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Vasily Khoruzhick
• [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Vasily Khoruzhick
• [U-Boot] [PATCH 1/1] ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'   Troy Kisky
• [U-Boot] [PATCH v2 1/2] nitrogen6x: prepare for CONFIG_MX6QDL   Troy Kisky
• [U-Boot] [PATCH v2 2/2] ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'   Troy Kisky
• [U-Boot] [PATCH] tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLS   Jan Kiszka
• [U-Boot] [PATCH] tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLS   Jan Kiszka
• [U-Boot] [PATCH 1/2] rockchip: px30: Fixup PMUGRF registers layout order   Paul Kocialkowski
• [U-Boot] [PATCH 2/2] rockchip: px30: Add support for using UART3 as debug UART   Paul Kocialkowski
• [U-Boot] [PATCH 2/2] rockchip: px30: Add support for using UART3 as debug UART   Paul Kocialkowski
• [U-Boot] [PATCH v2 1/3] rockchip: px30: Fixup PMUGRF registers layout order   Paul Kocialkowski
• [U-Boot] [PATCH v2 2/3] rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNEL   Paul Kocialkowski
• [U-Boot] [PATCH v2 3/3] rockchip: px30: Add support for using UART3 as debug UART   Paul Kocialkowski
• [U-Boot] [PATCH] configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig   Jonathan A. Kollasch
• [U-Boot] [PATCH v3 13/22] ram: rk3328: use common sdram driver   Matwey V. Kornilov
• [U-Boot] [PATCH v3 13/22] ram: rk3328: use common sdram driver   Matwey V. Kornilov
• [U-Boot] [PATCH v1 1/2] MAINTAINERS: change apalis_imx6/colibri_imx6 maintainers   Max Krummenacher
• [U-Boot] [PATCH v1 2/2] MAINTAINERS: change colibri_imx6/imx6ull/t30/vf maintainers   Max Krummenacher
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: LS1044A/1048A: enable Only 1x 10GE port   Pramod Kumar
• [U-Boot] [PATCH v3] armv8: ls1046afrwy: Add support for LS1046AFRWY Rev B board   Pramod Kumar
• [U-Boot] [PATCH v2 1/5] ARM: MediaTek: Add support for MediaTek MT8518 SoC   Mingming Lee
• [U-Boot] [PATCH] include/configs: ls1012a: add pfe stop command before boot linux kernel   Biwen Li
• [U-Boot] [PATCH] include/configs: ls1012a: add pfe stop command before boot linux kernel   Biwen Li
• [U-Boot] [v2] include/configs: ls1012a: add pfe stop command   Biwen Li
• [U-Boot] [PATCH 01/42] configs: ls1012a: enable CONFIG_DM_I2C   Biwen Li
• [U-Boot] [PATCH 02/42] include/configs: arm: ls1012a: fix compilation error   Biwen Li
• [U-Boot] [PATCH 03/42] board: freescale: ls1012ardb: ls1012ardb.c: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 04/42] board: freescale: ls1012ardb: eth.c: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 05/42] configs: ls1012a: enable CONFIG_DM_GPIO to fix compilation error   Biwen Li
• [U-Boot] [PATCH 06/42] gpio: do not include <asm/arch/gpio.h> for ARCH_LS1012A   Biwen Li
• [U-Boot] [PATCH 07/42] configs: ls1012a: enable CONFIG_DM_RTC   Biwen Li
• [U-Boot] [PATCH 08/42] board: freescale: ls1012aqds: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 09/42] include/configs: ls1012a_common: define default i2c bus   Biwen Li
• [U-Boot] [PATCH 10/42] configs: arm: ls1043a: enable CONFIG_DM_I2C   Biwen Li
• [U-Boot] [PATCH 11/42] include/configs: arm: ls1043a: fix a compilation error   Biwen Li
• [U-Boot] [PATCH 12/42] configs: arm: ls1043a: enable CONFIG_DM_GPIO   Biwen Li
• [U-Boot] [PATCH 13/42] board: freescale: ls1043aqds: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 14/42] board: freescale: ls1043aqds: fix build error   Biwen Li
• [U-Boot] [PATCH 15/42] include/configs: ls1043a_common: define default i2c bus   Biwen Li
• [U-Boot] [PATCH 16/42] gpio: do not include <asm/arch/gpio.h> for ARCH_LS1043A   Biwen Li
• [U-Boot] [PATCH 17/42] configs: ls1046a: enable CONFIG_DM_I2C   Biwen Li
• [U-Boot] [PATCH 18/42] include/configs: arm: ls1046a: fix compilation error   Biwen Li
• [U-Boot] [PATCH 19/42] configs: arm: ls1046a: enable CONFIG_DM_GPIO   Biwen Li
• [U-Boot] [PATCH 20/42] board: freescale: ls1046aqds: fix build error   Biwen Li
• [U-Boot] [PATCH 21/42] include/configs: ls1046a_common: do not define CONFIG_DM_I2C for spl   Biwen Li
• [U-Boot] [PATCH 22/42] armv8: dts: ls1046ardb: enable i2c0 and i2c3 DT node   Biwen Li
• [U-Boot] [PATCH 23/42] include/configs: ls1046a_common.h: define default i2c bus   Biwen Li
• [U-Boot] [PATCH 24/42] armv8: dts: ls1046aqds: enable i2c0 DT node   Biwen Li
• [U-Boot] [PATCH 25/42] armv8: dts: ls1046afrwy: enable i2c0 DT node   Biwen Li
• [U-Boot] [PATCH 26/42] board: freescale: ls1046aqds: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 27/42] board: freescale: ls1046afrwy: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 28/42] pmic: i2c: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 29/42] gpio: do not include <asm/arch/gpio.h> for ARCH_LS1046A   Biwen Li
• [U-Boot] [PATCH 30/42] configs: arm: ls1021a: enable CONFIG_DM_I2C   Biwen Li
• [U-Boot] [PATCH 31/42] include/configs: arm: ls1021a: fix compilation error   Biwen Li
• [U-Boot] [PATCH 32/42] board: freescale: ls1021atwr: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 33/42] configs: arm: ls1021a: fix compilation error   Biwen Li
• [U-Boot] [PATCH 34/42] ls1021aqds: dcu: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 35/42] board: freescale: ls1021aqds: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 36/42] include/configs: ls1021atwr: i2c: do not define DM_I2C for spl   Biwen Li
• [U-Boot] [PATCH 37/42] video: dcu: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 38/42] board: freescale: common: diu_ch7301: support dm_i2c_* API   Biwen Li
• [U-Boot] [PATCH 39/42] rtc: pcf8563: support driver model   Biwen Li
• [U-Boot] [PATCH 40/42] armv8: fsl-layerscape: spl: fix build error when enabled CONFIG_DM_I2C   Biwen Li
• [U-Boot] [PATCH 41/42] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag   Biwen Li
• [U-Boot] [PATCH 42/42] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN   Biwen Li
• [U-Boot] [v3] include/configs: ls1012a: add pfe stop command   Biwen Li
• [U-Boot] [v2] include/configs: ls1012a: add pfe stop command   Biwen Li
• [U-Boot] [v2 1/8] rtc: pcf8563: support driver model   Biwen Li
• [U-Boot] [v2 2/8] armv8: fsl-layerscape: spl: fix build error when enabled CONFIG_DM_I2C   Biwen Li
• [U-Boot] [v2 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag   Biwen Li
• [U-Boot] [v2 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN   Biwen Li
• [U-Boot] [v2 5/8] dm: ls1012a: add i2c DM support   Biwen Li
• [U-Boot] [v2 6/8] dm: arm: ls1043a: add i2c DM support   Biwen Li
• [U-Boot] [v2 7/8] dm: arm: ls1046a: add i2c DM support   Biwen Li
• [U-Boot] [v2 8/8] dm: arm: ls1021a: add i2c DM support   Biwen Li
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Walter Lozano
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Walter Lozano
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Walter Lozano
• [U-Boot] [PATCH 2/2] ARM: dts: imx6qdl: Add U-Boot specific device tree files for Cubox-i   Walter Lozano
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Walter Lozano
• [U-Boot] [PATCH v4 4/5] dm: core: Don't include ofnode functions with of-platdata   Walter Lozano
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Walter Lozano
• [U-Boot] [PATCH 0/7] mmc: fsl_esdhc: clean up and shrink the driver   Y.b. Lu
• [U-Boot] [PATCH 0/4] Drop redundant code for eSDHC clock getting   Y.b. Lu
• [U-Boot] [PATCH 0/4] Drop redundant code for eSDHC clock getting   Yangbo Lu
• [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: get clock directly from global data   Yangbo Lu
• [U-Boot] [PATCH 2/4] arm: ls1021a: drop redundant board_mmc_init()   Yangbo Lu
• [U-Boot] [PATCH 3/4] arm: drop eSDHC clock getting in mxc_get_clock() for layerscape   Yangbo Lu
• [U-Boot] [PATCH 4/4] mpc83xx: remove unused clock.h   Yangbo Lu
• [U-Boot] [V3 1/2] ata: fsl_sata: Add DM support for Freescale PowerPC SATA driver   Peng Ma
• [U-Boot] [V3 2/2] ata: sata_sil: Add DM support for Silicon sata driver   Peng Ma
• [U-Boot] [V3 2/2] ata: sata_sil: Add DM support for Silicon sata driver   Peng Ma
• [U-Boot] [V3 1/2] ata: fsl_sata: Add DM support for Freescale PowerPC SATA driver   Peng Ma
• [U-Boot] [PATCH 1/5] Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."   Peng Ma
• [U-Boot] [PATCH 2/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"   Peng Ma
• [U-Boot] [PATCH 3/5] arch: powerpc: Rewrite the sata node to fit the driver   Peng Ma
• [U-Boot] [PATCH 4/5] Revert "configs: enable sata device module in T2080QDS"   Peng Ma
• [U-Boot] [PATCH 5/5] ata: fsl_sata: Update fsl sata header file   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 2/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 1/5] Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 2/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"   Peng Ma
• [U-Boot] [PATCH] arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors   Suniel Mahesh
• [U-Boot] [PATCH 21/30] liebherr: Drop duplicate dm.h inclusion   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (06.11.2019)   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (06.11.2019)   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (06.11.2019)   Lukasz Majewski
• [U-Boot] [PATCH v2] spl: Introduce SPL_DM_GPIO Kconfig define   Lukasz Majewski
• [U-Boot] [PATCH v2] spl: Introduce SPL_DM_GPIO Kconfig define   Lukasz Majewski
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Lukasz Majewski
• [U-Boot] [PATCH v2 2/2] usb: dwc2: fix possible alignment issues   Lukasz Majewski
• [U-Boot] [U-Boot-Board-Maintainers] [U-Boot-Custodians] [RFC] Eliminate boards not using CONFIG_DM=y   Lukasz Majewski
• [U-Boot] GPT overlap on i.MX6   Lukasz Majewski
• [U-Boot] [PATCH v1 1/4] dfu: Drop unused prototype of dfu_trigger_reset()   Lukasz Majewski
• [U-Boot] [PATCH v1 2/4] dfu: Refactor do_dfu() to handle optional argument   Lukasz Majewski
• [U-Boot] [PATCH v1 3/4] dfu: Add optional timeout parameter   Lukasz Majewski
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Lukasz Majewski
• [U-Boot] [PATCH v1 3/4] dfu: Add optional timeout parameter   Lukasz Majewski
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Lukasz Majewski
• [U-Boot] GPT overlap on i.MX6   Lukasz Majewski
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Lukasz Majewski
• [U-Boot] GPT overlap on i.MX6   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (29.11.2019)   Lukasz Majewski
• [U-Boot] amlogic a96 mini   Belisko Marek
• [U-Boot] [PATCH 1/2] configs: ls1028a: Resync with savedefconfig   Alex Marginean
• [U-Boot] [PATCH 2/2] configs: ls1028a: enable CMD_DM   Alex Marginean
• [U-Boot] [PATCH v3 0/5] Add helper function for linking a DM Eth device to a PHY   Alex Marginean
• [U-Boot] [PATCH v3 1/5] net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity   Alex Marginean
• [U-Boot] [PATCH v3 2/5] net: mdio-uclass: add dm_eth_phy_connect helper function   Alex Marginean
• [U-Boot] [PATCH v3 3/5] net: mdio-uclass: Add helper functions for scanning the MDIO bus   Alex Marginean
• [U-Boot] [PATCH v3 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Alex Marginean
• [U-Boot] [PATCH v3 5/5] drivers: net: fsl_enetc: use the new MDIO DM helper functions   Alex Marginean
• [U-Boot] [PATCH] configs: ls1028a: enable OF_LIBFDT_OVERLAY   Alex Marginean
• [U-Boot] [PATCH v4 0/5] Add helper function for linking a DM Eth device to a PHY   Alex Marginean
• [U-Boot] [PATCH v4 1/5] net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity   Alex Marginean
• [U-Boot] [PATCH v4 2/5] net: mdio-uclass: add dm_eth_phy_connect helper function   Alex Marginean
• [U-Boot] [PATCH v4 3/5] net: mdio-uclass: Add helper functions for scanning the MDIO bus   Alex Marginean
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Alex Marginean
• [U-Boot] [PATCH v4 5/5] drivers: net: fsl_enetc: use the new MDIO DM helper functions   Alex Marginean
• [U-Boot] [PATCH v3 00/11] Add XFI, USXGMII net protocols, use them in Aquantia driver   Alex Marginean
• [U-Boot] [PATCH v3 01/11] include: phy: define XFI and USXGMII interface types   Alex Marginean
• [U-Boot] [PATCH v3 02/11] include: phy: add data field for private driver data   Alex Marginean
• [U-Boot] [PATCH v3 03/11] drivers: net: aquantia: use XFI, USXGMII interface types   Alex Marginean
• [U-Boot] [PATCH v3 04/11] drivers: net: aquantia: add PHY generation information   Alex Marginean
• [U-Boot] [PATCH v3 05/11] drivers: net: aquantia: set up SI protocol based on interface type   Alex Marginean
• [U-Boot] [PATCH v3 06/11] drivers: net: aquantia: set MDI reversal based on DT property   Alex Marginean
• [U-Boot] [PATCH v3 07/11] drivers: net: aquantia: set SMBus addr based on DT property   Alex Marginean
• [U-Boot] [PATCH v3 08/11] drivers: net: aquantia: check system interface too when checking for link up   Alex Marginean
• [U-Boot] [PATCH v3 09/11] doc: bindings: add bindings document for PHY nodes   Alex Marginean
• [U-Boot] [PATCH v3 10/11] doc: bindings: Aquantia PHY node binding   Alex Marginean
• [U-Boot] [PATCH v3 11/11] drivers: net: fsl_enetc: use XFI, USXGMII interface type macros   Alex Marginean
• [U-Boot] [PATCH 1/3] drivers: net: fsl_enetc: Add 2.5Gbps to supported link speeds   Alex Marginean
• [U-Boot] [PATCH 2/3] drivers: net: fsl_enetc: move PCS and PHY config to probe   Alex Marginean
• [U-Boot] [PATCH 3/3] drivers: net: fsl_enetc_mdio: return with time-out if HW is stuck   Alex Marginean
• [U-Boot] [RFC PATCH v3 0/3] Felix Eth switch driver and questions on DSA switches   Alex Marginean
• [U-Boot] [RFC PATCH v3 1/3] drivers: net: Add a driver for the Felix Ethernet switch on NXP LS1028A   Alex Marginean
• [U-Boot] [RFC PATCH v3 2/3] arm: dts: ls1028a: add node for the integrated Ethernet switch   Alex Marginean
• [U-Boot] [RFC PATCH v3 3/3] configs: ls1028a: enable FSL_FELIX switch driver   Alex Marginean
• [U-Boot] [PATCH 0/6] Introduce DSA Ethernet switch class and Felix driver   Alex Marginean
• [U-Boot] [PATCH 1/6] net: introduce DSA class for Ethernet switches   Alex Marginean
• [U-Boot] [PATCH 2/6] drivers: net: add a DSA sandbox driver   Alex Marginean
• [U-Boot] [PATCH 3/6] test: dm: add a simple unit test for DSA class   Alex Marginean
• [U-Boot] [PATCH 4/6] drivers: net: add Felix DSA switch driver   Alex Marginean
• [U-Boot] [PATCH 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies   Alex Marginean
• [U-Boot] [PATCH 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig   Alex Marginean
• [U-Boot] [PATCH v2] configs: ls1028a: enable CMD_DM   Alex Marginean
• [U-Boot] [PATCH v5 0/3] Add helper function for linking a DM Eth device to a PHY   Alex Marginean
• [U-Boot] [PATCH v5 1/3] net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity   Alex Marginean
• [U-Boot] [PATCH v5 2/3] net: mdio-uclass: add dm_eth_phy_connect helper function   Alex Marginean
• [U-Boot] [PATCH v5 3/3] drivers: net: fsl_enetc: use the new MDIO DM helper functions   Alex Marginean
• [U-Boot] [PATCH v2 0/6] Introduce DSA Ethernet switch class and Felix driver   Alex Marginean
• [U-Boot] [PATCH v2 1/6] net: introduce DSA class for Ethernet switches   Alex Marginean
• [U-Boot] [PATCH v2 2/6] drivers: net: add a DSA sandbox driver   Alex Marginean
• [U-Boot] [PATCH v2 3/6] test: dm: add a simple unit test for DSA class   Alex Marginean
• [U-Boot] [PATCH v2 4/6] drivers: net: add Felix DSA switch driver   Alex Marginean
• [U-Boot] [PATCH v2 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies   Alex Marginean
• [U-Boot] [PATCH v2 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig   Alex Marginean
• [U-Boot] [PATCH] drivers: net: fsl_enetc: register internal MDIO bus   Alex Marginean
• [U-Boot] [PATCH] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT   Alex Marginean
• [U-Boot] [PATCH v2] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT   Alex Marginean
• [U-Boot] [PATCH v2 3/4] drivers: mux: mmio-based syscon mux controller   Alexandru Marginean
• [U-Boot] [PATCH v4 0/5] Add helper function for linking a DM Eth device to a PHY   Alexandru Marginean
• [U-Boot] [PATCH v4 0/5] Add helper function for linking a DM Eth device to a PHY   Alexandru Marginean
• [U-Boot] [RFC PATCH v3 0/3] Felix Eth switch driver and questions on DSA switches   Alexandru Marginean
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Alexandru Marginean
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Alexandru Marginean
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Alexandru Marginean
• [U-Boot] [PATCH 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies   Alexandru Marginean
• [U-Boot] [PATCH] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT   Alexandru Marginean
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: LS1044A/1048A: enable Only 1x 10GE port   Alexandru Marginean
• [U-Boot] [PATCH 1/1] net: sun8i_emac: Remove debug message   Stefan Mavrodiev
• [U-Boot] [PATCH] buildman: Fix problem with non-existent output directories   Bin Meng
• [U-Boot] [PATCH v3 013/108] x86: spi: Add helper functions for Intel Fast SPI   Bin Meng
• [U-Boot] [PATCH v3 014/108] spi: Add support for memory-mapped flash   Bin Meng
• [U-Boot] [PATCH v3 031/108] x86: Don't print CPU info in TPL   Bin Meng
• [U-Boot] [PATCH v3 032/108] x86: Quieten TPL's jump_to_image_no_args()   Bin Meng
• [U-Boot] [PATCH v3 033/108] x86: power: Add an ACPI PMC uclass   Bin Meng
• [U-Boot] [PATCH 1/1] cbfs: do not pack struct cbfs_cachenode   Bin Meng
• [U-Boot] [PATCH v3 001/108] binman: Correct symbol calculation with non-zero image base   Bin Meng
• [U-Boot] [PATCH v3 002/108] binman: Add support for Intel FSP-S   Bin Meng
• [U-Boot] [PATCH v3 003/108] binman: Add support for Intel FSP-T   Bin Meng
• [U-Boot] [PATCH v3 004/108] binman: Fix up comment in intel-fsp-m   Bin Meng
• [U-Boot] [PATCH v3 006/108] dm: gpio: Allow control of GPIO uclass in SPL   Bin Meng
• [U-Boot] [PATCH v3 012/108] spl: Correct priority selection for image loaders   Bin Meng
• [U-Boot] [PATCH v3 014/108] spi: Add support for memory-mapped flash   Bin Meng
• [U-Boot] [PATCH v3 015/108] dm: doc: Correct of-platdata driver name   Bin Meng
• [U-Boot] [PATCH v3 019/108] spl: Add a size check for TPL   Bin Meng
• [U-Boot] [PATCH v3 021/108] x86: timer: Set up the timer in timer_early_get_count()   Bin Meng
• [U-Boot] [PATCH v3 022/108] x86: timer: Use a separate flag for whether timer is inited   Bin Meng
• [U-Boot] [PATCH v3 024/108] x86: spl: Support init of a PUNIT   Bin Meng
• [U-Boot] [PATCH v3 025/108] x86: tpl: Add a fake PCI bus   Bin Meng
• [U-Boot] [PATCH v3 029/108] x86: Add a CPU init function for TPL   Bin Meng
• [U-Boot] [PATCH v3 030/108] x86: Move CPU init to before spl_init()   Bin Meng
• [U-Boot] [PATCH v3 031/108] x86: Don't print CPU info in TPL   Bin Meng
• [U-Boot] [PATCH v3 032/108] x86: Quieten TPL's jump_to_image_no_args()   Bin Meng
• [U-Boot] Different build result for board "tbs2910" in gitlab-ci and azure   Bin Meng
• [U-Boot] Different build result for board "tbs2910" in gitlab-ci and azure   Bin Meng
• [U-Boot] Different build result for board "tbs2910" in gitlab-ci and azure   Bin Meng
• [U-Boot] [PATCH v3 006/108] dm: gpio: Allow control of GPIO uclass in SPL   Bin Meng
• [U-Boot] [PATCH v3 013/108] x86: spi: Add helper functions for Intel Fast SPI   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH v3 033/108] x86: power: Add an ACPI PMC uclass   Bin Meng
• [U-Boot] [PATCH v3 036/108] pci: Add support for p2sb uclass   Bin Meng
• [U-Boot] [PATCH v3 016/108] fdt: Show the preprocessed .dts file on error   Bin Meng
• [U-Boot] [PATCH v3 037/108] sandbox: Add PCI driver and test for p2sb   Bin Meng
• [U-Boot] [PATCH v3 038/108] x86: Move UCLASS_IRQ into a separate file   Bin Meng
• [U-Boot] [PATCH v3 039/108] sandbox: Add a test for IRQ   Bin Meng
• [U-Boot] [PATCH v3 040/108] x86: Define the SPL image start   Bin Meng
• [U-Boot] [PATCH v3 041/108] x86: Reduce mrccache record alignment size   Bin Meng
• [U-Boot] [PATCH v3 042/108] x86: Correct mrccache find_next_mrc_cache() calculation   Bin Meng
• [U-Boot] [PATCH v3 043/108] x86: Adjust mrccache_get_region() to use livetree   Bin Meng
• [U-Boot] [PATCH v3 047/108] x86: Update mrccache to support multiple caches   Bin Meng
• [U-Boot] [PATCH v3 048/108] x86: Add mrccache support for a 'variable' cache   Bin Meng
• [U-Boot] [PATCH v3 050/108] x86: Set the DRAM banks to reflect real location   Bin Meng
• [U-Boot] [PATCH v1 1/4] drivers: Add a new framework for multiplexer devices   Bin Meng
• [U-Boot] [PATCH 1/2] gpio: fix CONFIG_IS_ENABLED(DM_GPIO) for SPL   Bin Meng
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Bin Meng
• [U-Boot] Buildman Kconfig issue with consecutive builds   Bin Meng
• [U-Boot] Buildman Kconfig issue with consecutive builds   Bin Meng
• [U-Boot] [PATCH] usb: xhci: support 1.1 or later version   Bin Meng
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Bin Meng
• [U-Boot] [PATCH v2 5/5] sifive: fu540: Enable spi-nor flash support   Bin Meng
• [U-Boot] [PATCH v3 043/108] x86: Adjust mrccache_get_region() to use livetree   Bin Meng
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Bin Meng
• [U-Boot] [RFC PATCH v3 0/3] Felix Eth switch driver and questions on DSA switches   Bin Meng
• [U-Boot] [PATCH] net: tftp: Fix tftp store address check in store_block()   Bin Meng
• [U-Boot] [PATCH] net: tftp: Fix tftp store address check in store_block()   Bin Meng
• [U-Boot] [RESEND PATCH] net: tftp: Fix tftp store address check in store_block()   Bin Meng
• [U-Boot] [U-Boot-Board-Maintainers] Please pull u-boot-fdt   Bin Meng
• [U-Boot] [PATCH v2 5/5] sifive: fu540: Enable spi-nor flash support   Bin Meng
• [U-Boot] [PATCH v2 3/4] dm: spi: Check cs number before accessing slaves   Bin Meng
• [U-Boot] [U-Boot-Board-Maintainers] Please pull u-boot-fdt   Bin Meng
• [U-Boot] [PATCH v4 1/2] riscv: dts: Add hifive-unleashed-a00 dts from Linux   Bin Meng
• [U-Boot] [PATCH v4 2/2] sifive: fu540: Enable OF_SEPARATE   Bin Meng
• [U-Boot] [PATCH] dm: serial: Handle "stdout-path" with ":options" correctly   Bin Meng
• [U-Boot] [PATCH v3 051/108] x86: Set up the MTRR for SDRAM   Bin Meng
• [U-Boot] [PATCH v3 052/108] x86: Don't imply libfdt or SPI flash in TPL   Bin Meng
• [U-Boot] [PATCH v3 055/108] x86: fsp: Make graphics support common to FSP1/2   Bin Meng
• [U-Boot] [PATCH v3 056/108] x86: fsp: Correct wrong header inlude in fsp_support.c   Bin Meng
• [U-Boot] [PATCH v3 057/108] x86: fsp: Add FSP2 base support   Bin Meng
• [U-Boot] [PATCH v3 058/108] x86: fsp: Set up an MTRR for the graphics frame buffer   Bin Meng
• [U-Boot] [PATCH v3 059/108] x86: fsp: Add a new arch_fsp_init_r() hook   Bin Meng
• [U-Boot] [PATCH v3 060/108] x86: fsp: Allow remembering the location of FSP-S   Bin Meng
• [U-Boot] [PATCH v3 061/108] x86: fsp: Make the notify API call common   Bin Meng
• [U-Boot] [PATCH v3 063/108] x86: Add an option to include a FIT   Bin Meng
• [U-Boot] [PATCH v3 064/108] x86: Add support for newer CAR schemes   Bin Meng
• [U-Boot] [PATCH v3 065/108] x86: Disable microcode section for FSP2   Bin Meng
• [U-Boot] [PATCH v3 066/108] x86: Update the fsp command for FSP2   Bin Meng
• [U-Boot] [PATCH v3 067/108] x86: Update .dtsi file for FSP2   Bin Meng
• [U-Boot] [PATCH v3 068/108] x86: Add an option to control the position of U-Boot   Bin Meng
• [U-Boot] [PATCH v3 069/108] x86: Add an option to control the position of SPL   Bin Meng
• [U-Boot] [PATCH v3 070/108] x86: Add an fdtmap and image-header   Bin Meng
• [U-Boot] [PATCH v3 071/108] x86: Don't repeat microcode in U-Boot if not needed   Bin Meng
• [U-Boot] [PATCH v3 072/108] x86: Separate out U-Boot and device tree in ROM image   Bin Meng
• [U-Boot] [PATCH v3 073/108] x86: Make MSR_PKG_POWER_SKU common   Bin Meng
• [U-Boot] [PATCH v3 074/108] spi: Correct operations check in dm_spi_xfer()   Bin Meng
• [U-Boot] [PATCH v3 075/108] x86: spi: Don't enable SPI_FLASH_BAR by default   Bin Meng
• [U-Boot] [PATCH v3 076/108] spi: ich: Move init function just above probe()   Bin Meng
• [U-Boot] [PATCH v3 077/108] spi: ich: Move the protection/lockdown code into a function   Bin Meng
• [U-Boot] [PATCH v3 078/108] spi: ich: Convert to livetree   Bin Meng
• [U-Boot] [PATCH v3 079/108] spi: ich: Fix header order   Bin Meng
• [U-Boot] [PATCH v3 080/108] spi: ich: Various small tidy-ups   Bin Meng
• [U-Boot] [PATCH v3 081/108] spi: ich: Add mmio_base to struct ich_spi_platdata   Bin Meng
• [U-Boot] [PATCH v3 082/108] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Bin Meng
• [U-Boot] [PATCH v3 083/108] spi: ich: Support of-platdata for fast-spi   Bin Meng
• [U-Boot] [PATCH v3 085/108] spi: ich: Add support for get_mmap() method   Bin Meng
• [U-Boot] [PATCH v3 084/108] spi: ich: Support hardware sequencing   Bin Meng
• [U-Boot] [PATCH v3 086/108] spi: ich: Add TPL support   Bin Meng
• [U-Boot] [PATCH v3 087/108] spi: ich: Add Apollolake support   Bin Meng
• [U-Boot] [PATCH v3 088/108] mtd: spi: Export spi_flash_std_probe()   Bin Meng
• [U-Boot] [PATCH v3 089/108] x86: apollolake: Add basic IO addresses   Bin Meng
• [U-Boot] [PATCHv2] buildman: Fix problem with non-existent output directories   Bin Meng
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Bin Meng
• [U-Boot] [PATCH] arm: add acpi support for the arm   Bin Meng
• [U-Boot] [PATCH v3 083/108] spi: ich: Support of-platdata for fast-spi   Bin Meng
• [U-Boot] [PATCH v3 081/108] spi: ich: Add mmio_base to struct ich_spi_platdata   Bin Meng
• [U-Boot] [PATCH v3 077/108] spi: ich: Move the protection/lockdown code into a function   Bin Meng
• [U-Boot] [PATCH v2] travis: rework NXP layerscape jobs   Bin Meng
• [U-Boot] [PATCH v3 082/108] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Bin Meng
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Bin Meng
• [U-Boot] [PATCH 1/3] drivers: pci: Fix Host bridge bus number issue   Bin Meng
• [U-Boot] [PATCH 2/3] drivers: core: uclass: Get next device fail with driver probe fail   Bin Meng
• [U-Boot] [PATCH 3/3] drivers: pci: pci-uclass: Get PCI dma regions support   Bin Meng
• [U-Boot] [PATCH v4 000/100] x86: Add initial support for apollolake   Bin Meng
• [U-Boot] [PATCH] binman: README: fix default filename of u-boot-with-ucode-ptr   Bin Meng
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Bin Meng
• [U-Boot] [PATCH v2] dm: serial: Handle "stdout-path" with ":options" correctly   Bin Meng
• [U-Boot] [RESEND PATCH v2] dm: serial: Handle "stdout-path" with ":options" correctly   Bin Meng
• [U-Boot] [PATCH] dm: serial: Handle "stdout-path" with ":options" correctly   Bin Meng
• [U-Boot] [PATCH v5 001/101] binman: Add a library to access binman entries   Bin Meng
• [U-Boot] [PATCH v5 002/101] dm: gpio: Allow control of GPIO uclass in SPL   Bin Meng
• [U-Boot] [PATCH v5 003/101] dm: core: Fix offset_to_ofnode() with invalid offset   Bin Meng
• [U-Boot] [PATCH v5 004/101] dm: pci: Allow delaying auto-config until after relocation   Bin Meng
• [U-Boot] [PATCH v5 005/101] dm: pci: Move pci_get_devfn() into a common file   Bin Meng
• [U-Boot] [PATCH v5 006/101] net: Move the checksum functions to lib/   Bin Meng
• [U-Boot] [PATCH v5 008/101] i2c: designware: Avoid using static data   Bin Meng
• [U-Boot] [PATCH v5 007/101] i2c: designware: Tidy up PCI support   Bin Meng
• [U-Boot] [PATCH v5 009/101] i2c: designware: Support use in SPL   Bin Meng
• [U-Boot] [PATCH v5 010/101] x86: spi: Add helper functions for Intel Fast SPI   Bin Meng
• [U-Boot] [PATCH v5 011/101] fdt: Show the preprocessed .dts file on error   Bin Meng
• [U-Boot] [PATCH v5 012/101] board_r: Move early-timer init later   Bin Meng
• [U-Boot] [PATCH v5 013/101] RFC: sandbox: net: Suppress the MAC-address warnings   Bin Meng
• [U-Boot] [PATCH v5 015/101] x86: timer: use a timer base of 0   Bin Meng
• [U-Boot] [PATCH v5 016/101] x86: timer: Reduce timer code size in TPL on Intel CPUs   Bin Meng
• [U-Boot] [PATCH v5 017/101] x86: Drop unnecessary cpu code for TPL   Bin Meng
• [U-Boot] [PATCH v5 018/101] x86: Drop unnecessary interrupt code for TPL   Bin Meng
• [U-Boot] [PATCH v5 020/101] x86: sandbox: Add a PMC emulator and test   Bin Meng
• [U-Boot] [PATCH v5 021/101] x86: power: Add a 'pmc' command   Bin Meng
• [U-Boot] [PATCH v5 022/101] pci: Add support for p2sb uclass   Bin Meng
• [U-Boot] [PATCH v5 023/101] sandbox: Disable mmio by default in tests   Bin Meng
• [U-Boot] [PATCH v5 024/101] sandbox: Add PCI driver and test for p2sb   Bin Meng
• [U-Boot] [PATCH v5 025/101] x86: Move UCLASS_IRQ into a separate file   Bin Meng
• [U-Boot] [PATCH v5 026/101] sandbox: Add a test for IRQ   Bin Meng
• [U-Boot] [PATCH v5 029/101] x86: Correct mrccache find_next_mrc_cache() calculation   Bin Meng
• [U-Boot] [PATCH v5 030/101] x86: Adjust mrccache_get_region() to use livetree   Bin Meng
• [U-Boot] [PATCH v5 031/101] x86: Adjust mrccache_get_region() to support get_mmap()   Bin Meng
• [U-Boot] [PATCH v5 036/101] x86: Don't export mrccache_update()   Bin Meng
• [U-Boot] [PATCH v5 045/101] x86: fsp: Add FSP2 base support   Bin Meng
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Bin Meng
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Bin Meng
• [U-Boot] [PATCH v5 045/101] x86: fsp: Add FSP2 base support   Bin Meng
• [U-Boot] [PATCH v5 051/101] x86: Add an option to include a FIT   Bin Meng
• [U-Boot] [PATCH v5 052/101] x86: Add support for newer CAR schemes   Bin Meng
• [U-Boot] [PATCH v5 054/101] x86: Update the fsp command for FSP2   Bin Meng
• [U-Boot] [PATCH v5 056/101] x86: Add an option to control the position of U-Boot   Bin Meng
• [U-Boot] [PATCH v5 060/101] x86: Separate out U-Boot and device tree in ROM image   Bin Meng
• [U-Boot] [PATCH v5 063/101] x86: spi: Don't enable SPI_FLASH_BAR by default   Bin Meng
• [U-Boot] [PATCH v5 069/101] spi: ich: Add mmio_base to struct ich_spi_platdata   Bin Meng
• [U-Boot] [PATCH v5 070/101] dm: doc: Add a note about of-platdata and header files   Bin Meng
• [U-Boot] [PATCH v5 071/101] spi: ich: Correct max-size bug in ich_spi_adjust_size()   Bin Meng
• [U-Boot] [PATCH v5 072/101] spi: ich: Support of-platdata for fast-spi   Bin Meng
• [U-Boot] [PATCH v5 073/101] spi: ich: Support hardware sequencing   Bin Meng
• [U-Boot] [PATCH v5 074/101] spi: ich: Add support for get_mmap() method   Bin Meng
• [U-Boot] [PATCH v5 075/101] spi: ich: Add TPL support   Bin Meng
• [U-Boot] [PATCH v5 076/101] spi: ich: Add Apollo Lake support   Bin Meng
• [U-Boot] [PATCH v5 078/101] x86: Enable pinctrl in SPL and TPL   Bin Meng
• [U-Boot] [PATCH] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT   Bin Meng
• [U-Boot] [PATCH v5 045/101] x86: fsp: Add FSP2 base support   Bin Meng
• [U-Boot] [PATCH v5 073/101] spi: ich: Support hardware sequencing   Bin Meng
• [U-Boot] [PATCH v5 073/101] spi: ich: Support hardware sequencing   Bin Meng
• [U-Boot] [PATCH v5 079/101] x86: Add low-power subsystem (lpss) support   Bin Meng
• [U-Boot] [PATCH v5 080/101] x86: Add a generic Intel pinctrl driver   Bin Meng
• [U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected   Kurt Miller
• [U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意，邮件由lists.intricate at gmail.com代发】   Kurt Miller
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Soeren Moch
• [U-Boot] [PATCH 2/2] arm: dts: rk3399-rockpro64: slightly increase center voltage   Soeren Moch
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Soeren Moch
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Soeren Moch
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Soeren Moch
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Soeren Moch
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Soeren Moch
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Soeren Moch
• [U-Boot] [PATCH] tbs2910: Disable VxWorks image booting support   Soeren Moch
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Anand Moon
• [U-Boot] [PATCH] power: fan53555: add support for Silergy SYR82X and SYR83X   Anand Moon
• [U-Boot] [PATCH] power: fan53555: add support for Silergy SYR82X and SYR83X   Anand Moon
• [U-Boot] [U-boot] RK3399 + CortexM0   Anand Moon
• [U-Boot] [PATCH 0/4] Odroid n2 using eMMC would fail to boot up   Anand Moon
• [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process   Anand Moon
• [U-Boot] [PATCH 2/4] configs: meson64: enable GIC support for G12A/G12B   Anand Moon
• [U-Boot] [PATCH 3/4] board: amlogic: select PWRSEQ for all amlogic platform   Anand Moon
• [U-Boot] [PATCH 4/4] board: amlogic: Add missing config option   Anand Moon
• [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process   Anand Moon
• [U-Boot] [PATCH 4/4] board: amlogic: Add missing config option   Anand Moon
• [U-Boot] [PATCH] imx: sync with kernel device tree for Phycore SoM   Parthiban Nallathambi
• [U-Boot] [PATCH] rtc: add support for DS3232 device   Han Nandor
• [U-Boot] [PATCH 0/3] Add reboot mode support   Han Nandor
• [U-Boot] [PATCH 1/3] reboot-mode: add support for reboot mode control   Han Nandor
• [U-Boot] [PATCH 2/3] reboot-mode: read the boot mode from GPIOs status   Han Nandor
• [U-Boot] [PATCH 3/3] reboot-mode: read the boot mode from RTC memory   Han Nandor
• [U-Boot] Using sspi for hardware detection?   Romain Naour
• [U-Boot] Using sspi for hardware detection?   Romain Naour
• [U-Boot] standalone application on odroid xu4   Michael Neises
• [U-Boot] [PATCH 2/5] common: add blkcache init   Eric Nelson
• [U-Boot] [PATCH 2/5] common: add blkcache init   Eric Nelson
• [U-Boot] [PATCH 2/5] common: add blkcache init   Eric Nelson
• [U-Boot] [PATCH 1/4] ARM: mx6: ddr: Make debug prints work with tiny printf   Eric Nelson
• [U-Boot] [PATCH 2/4] ARM: mx6: ddr: Factor out SDQS configuration code   Eric Nelson
• [U-Boot] [PATCH 3/4] ARM: mx6: ddr: Configure all SDQS pullups using loop   Eric Nelson
• [U-Boot] [PATCH 4/4] ARM: mx6: ddr: Add support for iMX6SX   Eric Nelson
• [U-Boot] [PATCH] ARM: mx6: pmu: Expose PMU LDO configuration interface   Eric Nelson
• [U-Boot] [PATCH] arm: socfpga: add kernel parameter for immediate reboot   Nguyen, Dinh
• [U-Boot] [PATCH] imx: sys_proto: Fixing function imx6_is_bmode_from_gpr9()   Christoph Niedermaier
• [U-Boot] Pico-imx7d and imx7d sabre Break on 2020.01-rc3   Joris Offouga
• [U-Boot] [PATCH v1 1/1] cmd: adding malloc, math, and strcmp commands to u-boot   Vladimir Olovyannikov
• [U-Boot] [PATCH v1 1/1] cmd: pxe: Fix bootm argument count   Vladimir Olovyannikov
• [U-Boot] [PATCH INTERNAL v1 0/2] Add error logging support for Broadcom boards   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/2] cmd: bcm: logsetup: Add Broadcom error log setup command   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/2] common: Add DDR error logging (ELOG) support for Broadcom boards   Vladimir Olovyannikov
• [U-Boot] [PATCH v1 1/1] cmd: adding malloc, math, and strcmp commands to u-boot   Vladimir Olovyannikov
• [U-Boot] [PATCH v1 1/1] cmd: adding malloc, math, and strcmp commands to u-boot   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/1] drivers: gpio: Add common Broadcom iproc gpio driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/1] drivers: i2c: Add brcm iproc I2C driver support   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/1] cmd: gpt: Enumerate partitions and save info into an U-Boot variable   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/1] drivers: pcie: Add Broadcom IPROC PCIe driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 0/3] Introduce APIs for multi PCIe host controller platforms   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/3] drivers: pci: Fix Host bridge bus number issue   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/3] drivers: core: uclass: Get next device fail with driver probe fail   Vladimir Olovyannikov
• [U-Boot] [PATCH 3/3] drivers: pci: pci-uclass: Get PCI dma regions support   Vladimir Olovyannikov
• [U-Boot] [PATCH 0/3] Extend pinctrl-single driver with APIs   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/3] pinctrl: pinctrl-single: Handle different register width   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/3] pinctrl: pinctrl-single: Add request api   Vladimir Olovyannikov
• [U-Boot] [PATCH 3/3] pinctrl: pinctrl-single: Parse gpio details from dt   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/1] arm: cpu: armv8: add support for arm psci reset2.   Vladimir Olovyannikov
• [U-Boot] [PATCH 0/2] Add Broadcom SPI driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/2] drivers: spi: Add commands for Micron SPI   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/2] drivers: spi: Add brcm iproc spi driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/1] drivers: mmc: rpmb: Use R1 response   Vladimir Olovyannikov
• [U-Boot] [PATCH 0/2] Add SP805 driver for iproc platforms (DM)   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/2] dt-bindings: documentation on sp805(DM) iproc driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 0/2] Add Broadcom XHCI driver for iproc platforms   Vladimir Olovyannikov
• [U-Boot] [PATCH 1/2] dt-bindings: Documentation on BRCM xHCI controller   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/2] drivers: usb: host: Add BRCM xHCI driver   Vladimir Olovyannikov
• [U-Boot] [PATCH 2/2] drivers: usb: host: Add BRCM xHCI driver   Vladimir Olovyannikov
• [U-Boot] [PATCH v2 0/2] Add Broadcom XHCI driver for iproc platforms   Vladimir Olovyannikov
• [U-Boot] [PATCH v2 1/2] dt-bindings: Documentation on BRCM xHCI controller   Vladimir Olovyannikov
• [U-Boot] [PATCH v2 2/2] drivers: usb: host: Add BRCM xHCI driver   Vladimir Olovyannikov
• [U-Boot] [PATCH v2 2/2] drivers: usb: host: Add BRCM xHCI driver   Vladimir Olovyannikov
• [U-Boot] [PATCH v2 0/2] Add Broadcom XHCI driver for iproc platforms   Vladimir Olovyannikov
• [U-Boot] [PATCH v3 1/2] dt-bindings: Documentation on BRCM xHCI controller   Vladimir Olovyannikov
• [U-Boot] [PATCH v3 2/2] drivers: usb: host: Add BRCM xHCI driver   Vladimir Olovyannikov
• [U-Boot] [PATCH v3 0/2] Add Broadcom XHCI driver for iproc platforms   Vladimir Olovyannikov
• [U-Boot] [PATCH v3 1/2] dt-bindings: Documentation on BRCM xHCI controller   Vladimir Olovyannikov
• [U-Boot] [PATCH v3 2/2] drivers: usb: host: Add BRCM xHCI driver   Vladimir Olovyannikov
• [U-Boot] Pull request: u-boot-net.git master   Vladimir Oltean
• [U-Boot] [PATCH 0/6] Introduce DSA Ethernet switch class and Felix driver   Vladimir Oltean
• [U-Boot] [PATCH] arm: socfpga: stratix10: Add alias for gmac0 in S10 dts   Ooi, Joyce
• [U-Boot] [PATCH] spi: cadence_qspi_apb: fix QSPI write issues   Ooi, Joyce
• [U-Boot] [PATCH] arm: dts: Stratix10: change pad skew values for EMAC0 PHY driver   Ooi, Joyce
• [U-Boot] [PATCH] arm: socfpga: add kernel parameter for immediate reboot   Ooi, Joyce
• [U-Boot] [PATCH] board: altera: stratix10: add fitImage to support secure boot   Ooi, Joyce
• [U-Boot] Different build result for board "tbs2910" in gitlab-ci and azure   Igor Opaniuk
• [U-Boot] [PATCH v3 0/5] imx: nandbcb: support for i.MX7 and bcb only updates   Igor Opaniuk
• [U-Boot] [PATCH v3 1/5] imx: gpmi: add defines for hw randominizer   Igor Opaniuk
• [U-Boot] [PATCH v3 2/5] nand: mxs_nand: add API for switching different BCH layouts   Igor Opaniuk
• [U-Boot] [PATCH v3 3/5] imx: nandbcb: add support for i.MX7   Igor Opaniuk
• [U-Boot] [PATCH v3 4/5] imx: nandbcb: refactor update function   Igor Opaniuk
• [U-Boot] [PATCH v3 5/5] imx: nandbcb: add support for writing BCB only   Igor Opaniuk
• [U-Boot] [PATCH v2 3/5] imx: nandbcb: add support for i.MX7   Igor Opaniuk
• [U-Boot] [PATCH v3 1/2] ARM: dts: imx6ull-colibri: change hierarchy of DTS files   Igor Opaniuk
• [U-Boot] [PATCH v3 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes   Igor Opaniuk
• [U-Boot] [PATCH v3 1/2] ARM: dts: imx6ull-colibri: change hierarchy of DTS files   Igor Opaniuk
• [U-Boot] [PATCH v1 0/6] imx: colibri imx6/imx7: apalis imx6: migrate to DM_ETH   Igor Opaniuk
• [U-Boot] [PATCH v1 1/6] ARM: dts: imx6_colibri: introduce fec node   Igor Opaniuk
• [U-Boot] [PATCH v1 2/6] colibri_imx6: migrate to DM_ETH   Igor Opaniuk
• [U-Boot] [PATCH v1 3/6] ARM: dts: imx6_apalis: introduce fec node   Igor Opaniuk
• [U-Boot] [PATCH v1 4/6] apalis_imx6: migrate to DM_ETH   Igor Opaniuk
• [U-Boot] [PATCH v1 5/6] ARM: dts: imx7: imx7_colibri: introduce fec node   Igor Opaniuk
• [U-Boot] [PATCH v1 6/6] colibri_imx7: migrate to DM_ETH   Igor Opaniuk
• [U-Boot] [PATCH v1 1/2] MAINTAINERS: change apalis_imx6/colibri_imx6 maintainers   Igor Opaniuk
• [U-Boot] [PATCH v1 2/2] MAINTAINERS: change colibri_imx6/imx6ull/t30/vf maintainers   Igor Opaniuk
• [U-Boot] [RFC PATCH v1] imx: bootaux: PoC for elf firmware support   Igor Opaniuk
• [U-Boot] [PATCH v1] imx: bootaux: elf firmware support   Igor Opaniuk
• [U-Boot] [PATCH v1] imx: bootaux: elf firmware support   Igor Opaniuk
• [U-Boot] Quickboot in u-boot   Igor Opaniuk
• [U-Boot] SPDX header might be wrong in 4 files from Android Open Source Project   Igor Opaniuk
• [U-Boot] [U-boot] regression: bootaux doesn't work with DCACHE enabled   Igor Opaniuk
• [U-Boot] [U-boot] regression: bootaux doesn't work with DCACHE enabled   Igor Opaniuk
• [U-Boot] [PATCH v2 1/3] mach-imx: bootaux: print stack pointer and reset vector   Igor Opaniuk
• [U-Boot] [PATCH v2 2/3] mach-imx: bootaux: add dcache flushing before enabling M4   Igor Opaniuk
• [U-Boot] [PATCH v2 3/3] mach-imx: bootaux: elf firmware support   Igor Opaniuk
• [U-Boot] [PATCH v1 2/2] board: colibri_imx7: reserve DDR memory for Cortex-M4   Igor Opaniuk
• [U-Boot] [PATCH v1 1/2] common: fdt_support: add support for setting usable memory   Igor Opaniuk
• [U-Boot] [PATCH 1/2] cosmetic: Fix spelling and whitespace errors   Chris Packham
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Chris Packham
• [U-Boot] IO Error Propagation on Armada-385   Chris Packham
• [U-Boot] [PATCH] ARC: enable unit tests on development platforms   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: enable unit tests on development platforms   Eugeniy Paltsev
• [U-Boot] [PATCH] rpi4: fix dram bank initialization   Jian-Hong Pan
• [U-Boot] [PATCH v2] rpi4: fix dram bank initialization   Jian-Hong Pan
• [U-Boot] [PATCH] rpi4: fix dram bank initialization   Jian-Hong Pan
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Anup Patel
• [U-Boot] [PATCH v4 1/2] riscv: dts: Add hifive-unleashed-a00 dts from Linux   Anup Patel
• [U-Boot] [PATCH v4 2/2] sifive: fu540: Enable OF_SEPARATE   Anup Patel
• [U-Boot] [RFC/RFT U-Boot PATCH] image: Add Image.gz parsing support in booti.   Atish Patra
• [U-Boot] [RFC/RFT U-Boot PATCH] image: Add Image.gz parsing support in booti.   Atish Patra
• [U-Boot] [RFC/RFT PATCH v3 0/3] Add compressed Image booting support   Atish Patra
• [U-Boot] [RFC/RFT PATCH v3 1/3] lib: kconfig: Add option to set BZIP2 compression method   Atish Patra
• [U-Boot] [RFC/RFT PATCH v3 2/3] image: Add a common compression type detection function.   Atish Patra
• [U-Boot] [RFC/RFT PATCH v3 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [U-Boot] [PATCH 4/8] riscv: andes_plic: Fix some wrong configurations   Atish Patra
• [U-Boot] [RFC/RFT PATCH v3 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [U-Boot] [RFC/RFT PATCH v4 0/3] Add compressed Image booting support   Atish Patra
• [U-Boot] [RFC/RFT PATCH v4 1/3] lib: kconfig: Add option to set BZIP2 compression method   Atish Patra
• [U-Boot] [RFC/RFT PATCH v4 2/3] image: Add a common compression type detection function.   Atish Patra
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [U-Boot] [RFC/RFT PATCH v4 3/3] image: Add compressed Image parsing support in booti.   Atish Patra
• [U-Boot] IO Error Propagation on Armada-385   Luka Perkov
• [U-Boot] [PATCH] net: tftp: Fix too small block size   Andre Przywara
• [U-Boot] [RFC PATCH 0/1] Update doc/README.drivers.eth   Andre Przywara
• [U-Boot] [RFC PATCH 1/1] doc: net: Rewrite network driver documentation   Andre Przywara
• [U-Boot] [RFC PATCH 1/1] doc: net: Rewrite network driver documentation   Andre Przywara
• [U-Boot] [uboot PATCH 0/4] phy: ti-pipe3: Match TRM sequence & settings   Roger Quadros
• [U-Boot] [uboot PATCH 1/4] phy: ti-pipe3: Use TRM recommended settings for SATA DPLL   Roger Quadros
• [U-Boot] [uboot PATCH 2/4] phy: ti-pipe3: Introduce mode property in driver data   Roger Quadros
• [U-Boot] [uboot PATCH 3/4] phy: ti-pipe3: improve DPLL stability for SATA & USB   Roger Quadros
• [U-Boot] [uboot PATCH 4/4] phy: ti-pipe3: Fix SATA & USB PHY power up sequence   Roger Quadros
• [U-Boot] [PATCH v2 2/4] dm: board: complete the initialization of the muxes in initr_dm()   Vignesh Raghavendra
• [U-Boot] [PATCH 1/2] spi: cadence_qspi: Move to spi-mem framework   Vignesh Raghavendra
• [U-Boot] [PATCH] mtd: spi-nor-core: Fix static checker warnings   Vignesh Raghavendra
• [U-Boot] [PATCH v2] spi: cadence_qspi: support DM_CLK   Vignesh Raghavendra
• [U-Boot] [PATCH v2] spi: cadence_qspi: support DM_CLK   Vignesh Raghavendra
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Vignesh Raghavendra
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Vignesh Raghavendra
• [U-Boot] [PATCH 00/11] ti: k3-udma: Add support for J721e   Vignesh Raghavendra
• [U-Boot] [PATCH 01/11] lib: Import few bitmap functions from Linux   Vignesh Raghavendra
• [U-Boot] [PATCH 02/11] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager   Vignesh Raghavendra
• [U-Boot] [PATCH 03/11] soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop   Vignesh Raghavendra
• [U-Boot] [PATCH 04/11] soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandle   Vignesh Raghavendra
• [U-Boot] [PATCH 05/11] dma: ti: k3-udma: Get SYSFW reference from DT phandle   Vignesh Raghavendra
• [U-Boot] [PATCH 06/11] dma: ti: k3-udma: Remove coherency check for cache ops   Vignesh Raghavendra
• [U-Boot] [PATCH 07/11] dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfers   Vignesh Raghavendra
• [U-Boot] [PATCH 08/11] dma: ti: k3-udma: Switch to exposed ring mode   Vignesh Raghavendra
• [U-Boot] [PATCH 09/11] dma: ti: k3-udma: Fix ring push operation for 32 bit cores   Vignesh Raghavendra
• [U-Boot] [PATCH 10/11] dma: ti: k3-udma: Fix build warnings when building for 32 bit platforms   Vignesh Raghavendra
• [U-Boot] [PATCH 11/11] dma: ti: k3-udma: Add new compatible to J721e   Vignesh Raghavendra
• [U-Boot] [PATCH 05/11] dma: ti: k3-udma: Get SYSFW reference from DT phandle   Vignesh Raghavendra
• [U-Boot] [PATCH 1/2] Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA   Vignesh Raghavendra
• [U-Boot] [PATCH 2/2] dma: Add stub of dma_memcpy and dma_get_device   Vignesh Raghavendra
• [U-Boot] [PATCH 0/4] dma-mapping: Add cache flush/invalidation to dma_{un}map_single   Vignesh Raghavendra
• [U-Boot] [PATCH 1/4] asm: dma-mapping.h: Fix dma mapping functions   Vignesh Raghavendra
• [U-Boot] [PATCH 2/4] mmc: tmio-common: Drop custom dma mapping functions   Vignesh Raghavendra
• [U-Boot] [PATCH 3/4] mtd: denali: Drop custom dma mapping functions   Vignesh Raghavendra
• [U-Boot] [PATCH 4/4] net: macb: Drop local cache flush   Vignesh Raghavendra
• [U-Boot] [PATCH 0/6] J721e: Add networking support   Vignesh Raghavendra
• [U-Boot] [PATCH 1/6] dma: Introduce dma_get_cfg() interface   Vignesh Raghavendra
• [U-Boot] [PATCH 2/6] dma: ti: k3-udma: Implement dma_get_cfg() interface   Vignesh Raghavendra
• [U-Boot] [PATCH 3/6] net: ti: am65-cpsw-nuss: Rework RX flow ID handling   Vignesh Raghavendra
• [U-Boot] [PATCH 4/6] net: ti: am65-cpsw-nuss: Add new compatible for J721e   Vignesh Raghavendra
• [U-Boot] [PATCH 5/6] arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes   Vignesh Raghavendra
• [U-Boot] [PATCH 6/6] configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet   Vignesh Raghavendra
• [U-Boot] [PATCH v2 1/4] mtd: spi: spi-nor-core: Add SST vendor specific SFDP parser   Vignesh Raghavendra
• [U-Boot] [PATCH 0/4] J721e: Add USB support   Vignesh Raghavendra
• [U-Boot] [PATCH 1/4] usb: cdns3: Fix include file path   Vignesh Raghavendra
• [U-Boot] [PATCH 2/4] environment: ti: Add DFU environment variables k3_dfu.h   Vignesh Raghavendra
• [U-Boot] [PATCH 3/4] arm: dts: k3-j721e: Add DT nodes for USB   Vignesh Raghavendra
• [U-Boot] [PATCH 4/4] configs: j721e_evm_a72_defconfig: Enable USB related configs   Vignesh Raghavendra
• [U-Boot] [PATCH 02/11] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager   Vignesh Raghavendra
• [U-Boot] [PATCH 1/4] usb: cdns3: Fix include file path   Vignesh Raghavendra
• [U-Boot] [PATCH v2 0/2] spi: cadence-qspi: Move to spi-mem APIs   Vignesh Raghavendra
• [U-Boot] [PATCH v2 1/2] spi: cadence_qspi: Move to spi-mem framework   Vignesh Raghavendra
• [U-Boot] [PATCH v2 2/2] spi: cadence-qspi: Add direct mode support   Vignesh Raghavendra
• [U-Boot] [PATCH v3 075/108] x86: spi: Don't enable SPI_FLASH_BAR by default   Vignesh Raghavendra
• [U-Boot] [PATCH] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig   Vignesh Raghavendra
• [U-Boot] [PATCH 0/6] J721e: Add networking support   Vignesh Raghavendra
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] tools/imximage: fix reported DCD information for MX7ULP   Jorge Ramirez-Ortiz
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Gray Remlin
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Gray Remlin
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Gray Remlin
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Gray Remlin
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Gray Remlin
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Gray Remlin
• [U-Boot] [PATCH V3 0/5] aes: add support for aes192 and aes256   Philippe Reynes
• [U-Boot] [PATCH V3 1/5] aes: add a define for the size of a block   Philippe Reynes
• [U-Boot] [PATCH V3 2/5] aes: add support of aes192 and aes256   Philippe Reynes
• [U-Boot] [PATCH V3 3/5] tegra20: crypto: update code to use new aes api   Philippe Reynes
• [U-Boot] [PATCH V3 4/5] aes: add test unit for aes128   Philippe Reynes
• [U-Boot] [PATCH V3 5/5] aes: add test unit for aes196 and aes256   Philippe Reynes
• [U-Boot] required host packages on Travis CI   Tom Rini
• [U-Boot] [RFC/RFT U-Boot PATCH] image: Add Image.gz parsing support in booti.   Tom Rini
• [U-Boot] [PATCH v2] cmd: avb: Fix requested partitions list   Tom Rini
• [U-Boot] [PATCH 1/2] libavb: Update libavb to current AOSP master   Tom Rini
• [U-Boot] [PATCH 2/2] libavb: Fix build warnings after updating the lib   Tom Rini
• [U-Boot] [PATCH] mkimage: Set correct FDT type and ramdisk architecture in FIT auto mode   Tom Rini
• [U-Boot] [PATCH] drivers: phy: Handle gracefully NULL pointers   Tom Rini
• [U-Boot] [PATCH] linux_compat: fix potential NULL pointer access   Tom Rini
• [U-Boot] [PATCH 1/2] common: Kconfig: Fix typo in TPL_LOG_CONSOLE description   Tom Rini
• [U-Boot] [PATCH 2/2] tiny-printf: Support vsnprintf()   Tom Rini
• [U-Boot] [PATCH v2] NVMe: do PCI enumerate before nvme scan   Tom Rini
• [U-Boot] [PATCH 1/1] lib: errno: sync error codes   Tom Rini
• [U-Boot] [PATCH 1/1] lib: errno: avoid error format-overflow   Tom Rini
• [U-Boot] [PATCH] dts: fix MULTI_DTB_FIT compression choice prompt   Tom Rini
• [U-Boot] [PATCH v3] ata: ahci allow 64-bit DMA for SATA   Tom Rini
• [U-Boot] [PATCH 1/1] disk: part_dos: correctly detect DOS PBR   Tom Rini
• [U-Boot] [PATCH v2 1/2] lib: errno: check for unsupported error number   Tom Rini
• [U-Boot] [PATCH v2 2/2] test: provide test for errno_str()   Tom Rini
• [U-Boot] [PATCH] lib: time: Add microsecond timer   Tom Rini
• [U-Boot] [PATCH v2] nvme: use page-aligned buffer for identify command   Tom Rini
• [U-Boot] [PATCH 1/1] virtio: pci: use correct type in virtio_pci_bind()   Tom Rini
• [U-Boot] [PATCH] nvme: flush dcache on both r/w, and the prp list   Tom Rini
• [U-Boot] [PATCH 1/1] checkpatch.pl: update from Linux kernel v5.4-rc3   Tom Rini
• [U-Boot] [PATCH v2] cmd: avb: Support A/B slots   Tom Rini
• [U-Boot] [PATCH] dts: Kconfig: Fix help for SPL_OF_CONTROL   Tom Rini
• [U-Boot] [PATCH] Makefile: Fix printing problem in size_check on overflow   Tom Rini
• [U-Boot] [PATCH] gpio: da8xx_gpio: Fix the _gpio_direction_output function   Tom Rini
• [U-Boot] [PATCHv3 01/13] gitlab-ci: Fix indentation in some stanzas   Tom Rini
• [U-Boot] [PATCHv3 02/13] gitlab-ci: Prepend to PATH rather than replace it   Tom Rini
• [U-Boot] [PATCHv3 03/13] test/py: Split mark to multiple lines   Tom Rini
• [U-Boot] [PATCHv3 04/13] test/py: Fix pytest4 deprecation warnings   Tom Rini
• [U-Boot] [PATCHv3 05/13] test/py: Automated conversion to Python 3   Tom Rini
• [U-Boot] [PATCHv3 06/13] test/py: Manual python3 fixes   Tom Rini
• [U-Boot] [PATCHv3 07/13] test/py: test_ut.py: Ensure we use bytes   Tom Rini
• [U-Boot] [PATCHv3 08/13] test/py: test_efi_selftest.py: Updates for python 3 support   Tom Rini
• [U-Boot] [PATCHv3 09/13] test/py: Update test_fs to decode check_output calls   Tom Rini
• [U-Boot] [PATCHv3 10/13] test/py: Rework test.py to be a different kind of wrapper   Tom Rini
• [U-Boot] [PATCHv3 11/13] test/py: Update docs, add requirements.txt for pip   Tom Rini
• [U-Boot] [PATCHv3 12/13] gitlab/travis: Rework how and when we use virtualenv in order to use python3   Tom Rini
• [U-Boot] [PATCHv3 13/13] test/py: Use raw strings more to avoid deprecation warnings   Tom Rini
• [U-Boot] [PATCH] azure: Update for python3 and current pytest   Tom Rini
• [U-Boot] [PATCH] azure: Update for python3 and current pytest   Tom Rini
• [U-Boot] [PATCH] azure: Update for python3 and current pytest   Tom Rini
• [U-Boot] [PATCH] azure: Update the script to prepend PATH not override PATH   Tom Rini
• [U-Boot] [PATCH] buildman: Fix problem with non-existent output directories   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Please pull u-boot-video   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc2   Tom Rini
• [U-Boot] [PATCH] azure: Update the script to prepend PATH not override PATH   Tom Rini
• [U-Boot] [PATCH 0/3] arm: dts: ti: sync cpsw/mdio/phy with latest linux 1 - drop phy_id   Tom Rini
• [U-Boot] Different build result for board "tbs2910" in gitlab-ci and azure   Tom Rini
• [U-Boot] Different build result for board "tbs2910" in gitlab-ci and azure   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH] buildman: Fix problem with non-existent output directories   Tom Rini
• [U-Boot] [PATCH] tbs2910: Disable Plan9/RTEMS bootm support   Tom Rini
• [U-Boot] [PATCH v2 7/8] env: ti: boot: Boot Android with dynamic partitions   Tom Rini
• [U-Boot] [PATCH] tbs2910: Disable Plan9/RTEMS bootm support   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Please pull ARC fixes for v2020.01-rc2   Tom Rini
• [U-Boot] [PATCH v2 16/17] binman: Move to use Python 3   Tom Rini
• [U-Boot] [PATCH v5 00/19] efi_loader: non-volatile variables support   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [PATCH 1/1] net: remove superfluous __packed attribute   Tom Rini
• [U-Boot] [PATCH 1/1] net: avoid address-of-packed-member error   Tom Rini
• [U-Boot] [PATCH 1/1] net: avoid address-of-packed-member error   Tom Rini
• [U-Boot] [RFC/RFT U-Boot PATCH] image: Add Image.gz parsing support in booti.   Tom Rini
• [U-Boot] [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191104   Tom Rini
• [U-Boot] [PATCH 1/3] arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id   Tom Rini
• [U-Boot] [PATCH 2/3] arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id   Tom Rini
• [U-Boot] [PATCH 3/3] arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id   Tom Rini
• [U-Boot] [PATCH v2 1/6] net: ti: cpsw: enable 10Mbps link speed support in rgmii mode   Tom Rini
• [U-Boot] [PATCH v2 2/6] net: ti: cpsw: move parsing of dt port's parameters in separate func   Tom Rini
• [U-Boot] [PATCH v2 3/6] net: ti: cpsw: add support for standard eth "max-speed" dt property   Tom Rini
• [U-Boot] [PATCH v2 4/6] net: ti: cpsw: fix mac tx internal delay for rgmii-rxid mode   Tom Rini
• [U-Boot] [PATCH v2 5/6] net: ti: am65x-cpsw: fix mac tx internal delay for rgmii-rxid mode   Tom Rini
• [U-Boot] [PATCH v2 6/6] net: ti: cpsw: convert to use dev/ofnode api   Tom Rini
• [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [RFC/RFT U-Boot PATCH] image: Add Image.gz parsing support in booti.   Tom Rini
• [U-Boot] [PATCH] travis: Rework how we write the ~/.buildman file   Tom Rini
• [U-Boot] Please pull u-boot-fdt   Tom Rini
• [U-Boot] [PATCH] travis: Rework how we write the ~/.buildman file   Tom Rini
• [U-Boot] required host packages on Travis CI   Tom Rini
• [U-Boot] [PULL] u-boot-mmc mmc-2019-11-5   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH] Makefile: fix dependency for imx targets   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [PATCH] gitlab/azure: Enable LLVM tests   Tom Rini
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Tom Rini
• [U-Boot] [PATCH] fdt: fix bcm283x dm-pre-reloc definitions   Tom Rini
• [U-Boot] [PATCH v2 1/3] fdt: fix bcm283x dm-pre-reloc definitions   Tom Rini
• [U-Boot] [PATCH] travis: Fix the clang-7 test   Tom Rini
• [U-Boot] [PATCH] common/console.c: Fix unused warning with console_doenv()   Tom Rini
• [U-Boot] [PATCH] gitlab/azure: Enable LLVM tests   Tom Rini
• [U-Boot] pull request u-boot-mpc85xx   Tom Rini
• [U-Boot] [RFC PATCH] dm: core: Remove libfdt dependency when unnecessary   Tom Rini
• [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0   Tom Rini
• [U-Boot] [PATCH] xilinx: Do defconfig syncup   Tom Rini
• [U-Boot] [PATCH v4 2/5] omap: mmc: Avoid using libfdt with of-platdata   Tom Rini
• [U-Boot] [PATCH] armv8: fsl-layerscape: fix hwconfig and prefetching   Tom Rini
• [U-Boot] [RFC/RFT PATCH v3 1/3] lib: kconfig: Add option to set BZIP2 compression method   Tom Rini
• [U-Boot] [RFC/RFT PATCH v3 2/3] image: Add a common compression type detection function.   Tom Rini
• [U-Boot] [RFC/RFT PATCH v3 3/3] image: Add compressed Image parsing support in booti.   Tom Rini
• [U-Boot] [PATCH] include/env.h: Ensure ulong is defined   Tom Rini
• [U-Boot] [PATCH] cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS   Tom Rini
• [U-Boot] [PATCH] [Cosmetic] Fix CRLF mess in shell script   Tom Rini
• [U-Boot] [PATCH] tools/img2brec.sh: Delete unused tool   Tom Rini
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   Tom Rini
• [U-Boot] [PATCH 01/30] lib: Allow crc32 to be disabled.   Tom Rini
• [U-Boot] White space cleanup   Tom Rini
• [U-Boot] [PATCH] cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS   Tom Rini
• [U-Boot] [PATCH] api: storage: Add the missing write operation support   Tom Rini
• [U-Boot] [PATCH] arm64: Add memcpy_{from, to}io() and memset_io() helpers   Tom Rini
• [U-Boot] [PATCH 1/3] Kconfig add config ERR_PTR_OFFSET   Tom Rini
• [U-Boot] [PATCH 2/3] linux err: make ERR_PTR/PTR_ERR architecture specific   Tom Rini
• [U-Boot] [PATCH 3/3] arm: socfpga: gen5: fix ERR_PTR_OFFSET   Tom Rini
• [U-Boot] [PATCH v2] spl: fix SPI config dependencies   Tom Rini
• [U-Boot] [PATCH] dlmalloc: calloc: fix zeroing early allocations   Tom Rini
• [U-Boot] [PATCH 1/1] hush: re-sequence includes   Tom Rini
• [U-Boot] [PATCH] arm: caches: Disable mmu only if mmu is available   Tom Rini
• [U-Boot] [PATCH 1/2] cmd: nand: Remove not used declaration   Tom Rini
• [U-Boot] [PATCH 2/2] cmd: mtdparts: Fix build with option ..._SHOW_NET_SIZES   Tom Rini
• [U-Boot] [PATCH v5] arm: add initial support for the Phytium Durian Board   Tom Rini
• [U-Boot] [PATCH v3 01/18] misc: k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0   Tom Rini
• [U-Boot] [PATCH v3 02/18] clk: clk-ti-sci: Notify AVS driver upon setting clock rate   Tom Rini
• [U-Boot] [PATCH v3 03/18] power: regulator: tps6236x: add support for tps6236x regulators   Tom Rini
• [U-Boot] [PATCH v3 04/18] misc: k3_avs: Add j721e support   Tom Rini
• [U-Boot] [PATCH v3 05/18] power: pmic: tps65941: Add support for tps65941 family of PMICs   Tom Rini
• [U-Boot] [PATCH v3 06/18] power: regulator: tps65941: add regulator support   Tom Rini
• [U-Boot] [PATCH v3 07/18] arm: mach-k3: am6_init: Initialize AVS class 0   Tom Rini
• [U-Boot] [PATCH v3 08/18] arm: mach-k3: j721e_init: Initialize avs class 0   Tom Rini
• [U-Boot] [PATCH v3 09/18] arm: dts: k3-am654-r5-base-board: Add VTM node   Tom Rini
• [U-Boot] [PATCH v3 10/18] arm: dts: k3-am654-r5-base-board: enable wkup_i2c0 driver for spl   Tom Rini
• [U-Boot] [PATCH v3 11/18] arm: dts: k3-am654-r5-base-board: add supply rail for MPU   Tom Rini
• [U-Boot] [PATCH v3 12/18] arm: dts: k3-am654-r5-base-board: enable wkup_vtm0 node and link in supplies   Tom Rini
• [U-Boot] [PATCH v3 13/18] arm: dts: k3-j721e-r5-common-proc-board: Add VTM node   Tom Rini
• [U-Boot] [PATCH v3 14/18] arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 node   Tom Rini
• [U-Boot] [PATCH v3 15/18] arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supply   Tom Rini
• [U-Boot] [PATCH v3 16/18] configs: am65x_evm_r5_defconfig: Enable TPS62363 regulator support   Tom Rini
• [U-Boot] [PATCH v3 17/18] configs: am65x_evm_r5_defconfig: Enable AVS class 0 support   Tom Rini
• [U-Boot] [PATCH v3 18/18] configs: j721e_evm_r5_defconfig: Enable AVS Class 0 & dependent configs   Tom Rini
• [U-Boot] [PATCH] ARM: omap3_logic: Power on MMC when setting up PMIC   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: dts: logicpd-torpedo-37xx-devkit-u-boot: Remove unused GPIO   Tom Rini
• [U-Boot] [PATCH 2/2] Revert "ARM: omap3_logic/omap35_logic: Enable GPIO in SPL"   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: dts: logicpd-som-lv-37xx-devkit-u-boot: Remove unused GPIO   Tom Rini
• [U-Boot] [PATCH 2/2] configs: omap3_logic_somlv: Remove GPIO from SPL   Tom Rini
• [U-Boot] [PATCH] Kconfig: ti: Make board detect EEPROM addresses depend BOARD_DETECT   Tom Rini
• [U-Boot] [PATCH] configs: j721e_evm_r5_defconfig: Remove SPL multi-DTB FIT support   Tom Rini
• [U-Boot] [PATCH] cmd/gpt: Address error cases during gpt rename more correctly   Tom Rini
• [U-Boot] White space cleanup   Tom Rini
• [U-Boot] Pull request: u-boot-rockchip-20191026   Tom Rini
• [U-Boot] [PATCH v2 00/41] common: Further reduce common.h   Tom Rini
• [U-Boot] [PATCH v2 00/41] common: Further reduce common.h   Tom Rini
• [U-Boot] [PATCH] tools/img2brec.sh: Delete unused tool   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Using kernelCI infrastructure for firmware testing   Tom Rini
• [U-Boot] [PATCH] include/env.h: Ensure ulong is defined   Tom Rini
• [U-Boot] [PATCH 1/3] evb-rk3128: Migrate CONFIG_ENV_IS_IN_MMC to defconfig   Tom Rini
• [U-Boot] [PATCH 2/3] pfla02: Migrate CONFIG_ENV_IS_IN_SPI_FLASH to defconfig   Tom Rini
• [U-Boot] [PATCH 3/3] defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT   Tom Rini
• [U-Boot] [PATCH] moveconfig.py: Fix more Python3 UTF issues   Tom Rini
• [U-Boot] [PATCH v2 09/41] spl: bootcount: Move code out of header file   Tom Rini
• [U-Boot] [PATCH v2 12/41] Move strtomhz() to vsprintf.h   Tom Rini
• [U-Boot] [PATCH v2 03/41] common: Drop global inclusion of status_led.h   Tom Rini
• [U-Boot] [PATCH v2 04/41] status_led: Tidy up the code style   Tom Rini
• [U-Boot] [PATCH v2 05/41] common: Move random-number functions into their own header   Tom Rini
• [U-Boot] [PATCH v2 06/41] common: Drop linux/crc8.h   Tom Rini
• [U-Boot] [PATCH v2 07/41] crc: Fix code style with crc functions   Tom Rini
• [U-Boot] [PATCH v2 08/41] crc32: Use the crc.h header for crc functions   Tom Rini
• [U-Boot] [PATCH v2 10/41] common: Move bootcount functions to their header file   Tom Rini
• [U-Boot] [PATCH v2 11/41] common: Move sorting functions to their own header file   Tom Rini
• [U-Boot] [PATCH v2 13/41] common: Move env_get_ip() to net.h   Tom Rini
• [U-Boot] [PATCH v2 14/41] serial: usb: Correct the usbtty_...() prototypes   Tom Rini
• [U-Boot] [PATCH v2 15/41] common: Move serial_printf() to the serial header   Tom Rini
• [U-Boot] [PATCH v2 16/41] common: Move serial functions out of common.h   Tom Rini
• [U-Boot] [PATCH v2 17/41] common: Add a new lz4.h header file   Tom Rini
• [U-Boot] [PATCH v2 18/41] common: Move some time functions out of common.h   Tom Rini
• [U-Boot] [PATCH v2 19/41] common: Move wait_ticks functions out of common.h   Tom Rini
• [U-Boot] [PATCH] m68k: Drop CONFIG_MCFPIT support   Tom Rini
• [U-Boot] [PATCH v2 20/41] common: Move timer_get_us() function out of common.h   Tom Rini
• [U-Boot] [PATCH v2 21/41] common: Move get_ticks() function out of common.h   Tom Rini
• [U-Boot] [PATCH v2 22/41] common: Move mii_init() function out of common.h   Tom Rini
• [U-Boot] [PATCH v2 24/41] common: Drop cpu_init()   Tom Rini
• [U-Boot] [PATCH v2 25/41] common: Move checkcpu() out of common.h   Tom Rini
• [U-Boot] [PATCH v2 27/41] arm: powerpc: Tidy up code style for cache functions   Tom Rini
• [U-Boot] [PATCH v2 29/41] common: Drop checkicache() and checkdcache()   Tom Rini
• [U-Boot] [PATCH v2 31/41] arm: powerpc: Tidy up code style for interrupt functions   Tom Rini
• [U-Boot] [PATCH v2 32/41] common: Move interrupt functions into a new header   Tom Rini
• [U-Boot] [PATCH v2 33/41] common: Move enable/disable_interrupts out of common.h   Tom Rini
• [U-Boot] [PATCH v2 34/41] common: Move command functions out of common.h   Tom Rini
• [U-Boot] [PATCH v2 35/41] common: Drop board_show_dram()   Tom Rini
• [U-Boot] [PATCH v2 36/41] common: Move board_get_usable_ram_top() out of common.h   Tom Rini
• [U-Boot] [PATCH v2 37/41] common: Move some board functions out of common.h   Tom Rini
• [U-Boot] [PATCH v2 38/41] common: Move pci_init_board() out of common.h   Tom Rini
• [U-Boot] [PATCH v2 39/41] common: Move trap_init() out of common.h   Tom Rini
• [U-Boot] [PATCH v2 40/41] common: Drop get_endaddr()   Tom Rini
• [U-Boot] [PATCH v2 41/41] common: Move old EEPROM functions into a new header   Tom Rini
• [U-Boot] pull request u-boot-fsl-qoriq   Tom Rini
• [U-Boot] Pull request: u-boot-rockchip-20191026   Tom Rini
• [U-Boot] [ANN] U-Boot v2020.01-rc2 released   Tom Rini
• [U-Boot] [PATCH] binman: tegra: Adjust symbol calculation depending on end-at-4gb   Tom Rini
• [U-Boot] [PATCH] .gitignore: Ignore .img files   Tom Rini
• [U-Boot] [PATCH v4] gitattributes: dont treat non-text files as text   Tom Rini
• [U-Boot] [PATCH v2 05/41] common: Move random-number functions into their own header   Tom Rini
• [U-Boot] [PATCH v2 32/41] common: Move interrupt functions into a new header   Tom Rini
• [U-Boot] [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191105   Tom Rini
• [U-Boot] [PATCH 1/3] evb-rk3128: Migrate CONFIG_ENV_IS_IN_MMC to defconfig   Tom Rini
• [U-Boot] [PATCH 2/3] pfla02: Migrate CONFIG_ENV_IS_IN_SPI_FLASH to defconfig   Tom Rini
• [U-Boot] [PATCH 3/3] defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT   Tom Rini
• [U-Boot] [PATCH] env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol   Tom Rini
• [U-Boot] [PATCH v3 01/42] common: Move legacy CPU functions to their own header   Tom Rini
• [U-Boot] [PATCH v3 19/42] common: Move wait_ticks functions out of common.h   Tom Rini
• [U-Boot] [PATCH v3 20/42] arm: pxa: Drop pxa_wait_ticks()   Tom Rini
• [U-Boot] [PATCH v3 33/42] common: Move interrupt functions into a new header   Tom Rini
• [U-Boot] [PATCH v3 34/42] common: Move enable/disable_interrupts out of common.h   Tom Rini
• [U-Boot] [PATCH v3 40/42] common: Move trap_init() out of common.h   Tom Rini
• [U-Boot] [PATCH v3 42/42] common: Move old EEPROM functions into a new header   Tom Rini
• [U-Boot] [PATCH 1/5] env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check   Tom Rini
• [U-Boot] [PATCH 2/5] fsl: layerscape: guard *env_sf_get_env_addr() on CONFIG_ENV_IS_IN_SPI_FLASH   Tom Rini
• [U-Boot] [PATCH 3/5] smart-gateway-mt7688: Correct build time check for overwriting factory data   Tom Rini
• [U-Boot] [PATCH 4/5] T1042RDB_PI_NAND_SECURE_BOOT: SECURE_BOOT means environment is nowhere   Tom Rini
• [U-Boot] [PATCH 5/5] env: Finish migration of common ENV options   Tom Rini
• [U-Boot] [PATCH] tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLS   Tom Rini
• [U-Boot] [PATCH 3/5] smart-gateway-mt7688: Correct build time check for overwriting factory data   Tom Rini
• [U-Boot] [PATCH] tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLS   Tom Rini
• [U-Boot] [PATCH 4/5] T1042RDB_PI_NAND_SECURE_BOOT: SECURE_BOOT means environment is nowhere   Tom Rini
• [U-Boot] [PATCH] input: Move input.o to be built only in some cases   Tom Rini
• [U-Boot] Build warnings in libfdt   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc3   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Pull request: u-boot-rockchip-20191026   Tom Rini
• [U-Boot] Please pull u-boot-video   Tom Rini
• [U-Boot] [PATCHv2 1/5] smart-gateway-mt7688: Rework build time check for overwriting factory data   Tom Rini
• [U-Boot] [PATCHv2 2/5] env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check   Tom Rini
• [U-Boot] [PATCHv2 3/5] fsl: layerscape: guard *env_sf_get_env_addr() on CONFIG_ENV_IS_IN_SPI_FLASH   Tom Rini
• [U-Boot] [PATCHv2 4/5] T1042RDB_PI_NAND_SECURE_BOOT: Guard t104xrdb SPL env code   Tom Rini
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Tom Rini
• [U-Boot] [ANN] U-Boot v2020.01-rc3 released   Tom Rini
• [U-Boot] [PATCH] travis: split NXP ARM32 job   Tom Rini
• [U-Boot] [PATCH] travis: split 32bit sun8i job   Tom Rini
• [U-Boot] [PATCH 2/2] efi_loader: enable EFI_LOADER on arm1136 and arm1176   Tom Rini
• [U-Boot] [PATCH 03/11] soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop   Tom Rini
• [U-Boot] [PATCH 01/11] lib: Import few bitmap functions from Linux   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: restrict EFI_LOADER to armv7 and armv8 on ARM   Tom Rini
• [U-Boot] [PATCH 2/2] efi_loader: enable EFI_LOADER on arm1136 and arm1176   Tom Rini
• [U-Boot] [PATCHv2] buildman: Fix problem with non-existent output directories   Tom Rini
• [U-Boot] [PATCH v1 1/1] cmd: adding malloc, math, and strcmp commands to u-boot   Tom Rini
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Tom Rini
• [U-Boot] [PATCH 1/1] env: Exit tools when invalid CRC found   Tom Rini
• [U-Boot] [PATCH v4 01/42] common: Move older CPU functions to their own header   Tom Rini
• [U-Boot] [PATCH v4 10/42] common: Move bootcount functions to their header file   Tom Rini
• [U-Boot] [PATCH v4 12/42] Move strtomhz() to vsprintf.h   Tom Rini
• [U-Boot] [PATCH v4 24/42] common: Move some CPU functions out of common.h   Tom Rini
• [U-Boot] [PATCH v4 26/42] common: Move checkcpu() out of common.h   Tom Rini
• [U-Boot] [PATCH v4 29/42] common: Move some cache and MMU functions out of common.h   Tom Rini
• [U-Boot] [PATCH v4 27/42] common: Move some SMP functions out of common.h   Tom Rini
• [U-Boot] [PATCH v4 31/42] common: Move ARM cache operations out of common.h   Tom Rini
• [U-Boot] [PATCH v4 09/42] spl: bootcount: Move code out of header file   Tom Rini
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Tom Rini
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Tom Rini
• [U-Boot] [PATCH] input: Move input.o to be built only in some cases   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc4   Tom Rini
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Tom Rini
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Tom Rini
• [U-Boot] [PATCH] env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol   Tom Rini
• [U-Boot] [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX   Tom Rini
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: default EFI_LOADER=n on ARM11   Tom Rini
• [U-Boot] [PATCH] ARM: socfpga: Fix default mtdparts   Tom Rini
• [U-Boot] pull request u-boot-mpc85xx   Tom Rini
• [U-Boot] [PATCH v1 1/1] cmd: adding malloc, math, and strcmp commands to u-boot   Tom Rini
• [U-Boot] [RFC] more features enabled on sandbox?   Tom Rini
• [U-Boot] [PATCH v2] travis: rework NXP layerscape jobs   Tom Rini
• [U-Boot] [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Tom Rini
• [U-Boot] [PATCH v2] travis: move orangepi to vendor job   Tom Rini
• [U-Boot] [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Tom Rini
• [U-Boot] [PATCHv2 1/5] smart-gateway-mt7688: Rework build time check for overwriting factory data   Tom Rini
• [U-Boot] [PATCHv2 2/5] env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check   Tom Rini
• [U-Boot] [PATCHv2 3/5] fsl: layerscape: guard *env_sf_get_env_addr() on CONFIG_ENV_IS_IN_SPI_FLASH   Tom Rini
• [U-Boot] [PATCHv2 4/5] T1042RDB_PI_NAND_SECURE_BOOT: Guard t104xrdb SPL env code   Tom Rini
• [U-Boot] [PATCHv2 5/5] env: Finish migration of common ENV options   Tom Rini
• [U-Boot] [PATCH v3] Update MAINTAINERS to include environment files   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] [PATCH v4 00/42] common: Further reduce common.h   Tom Rini
• [U-Boot] [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] [PATCH v2] travis: move orangepi to vendor job【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Tom Rini
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH] The sata port can be configured when driver model enabled.   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc4 (2)   Tom Rini
• [U-Boot] [PATCH v2 1/1] arm: fix -march for ARM11   Tom Rini
• [U-Boot] [PATCHv2] buildman: Fix problem with non-existent output directories   Tom Rini
• [U-Boot] [PATCH] scripts: dtc: ignore files generated generated by python   Tom Rini
• [U-Boot] [PATCH] moveconfig.py: Fix more Python3 UTF issues   Tom Rini
• [U-Boot] [PATCH v2 1/3] tools: checkpatch: Restore 'debug' and 'printf' to logFunctions list   Tom Rini
• [U-Boot] [PATCH v2] travis: move orangepi to vendor job   Tom Rini
• [U-Boot] [PATCH v3] travis: rework NXP layerscape jobs   Tom Rini
• [U-Boot] Pull request: u-boot-rockchip-20191124   Tom Rini
• [U-Boot] [PATCH v5 17/26] configs: socfpga: mcvevk: Remove useless UBI infos   Tom Rini
• [U-Boot] [GIT PULL resed] Raspberry Pi updates for v2020.01   Tom Rini
• [U-Boot] Please pull u-boot-video   Tom Rini
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Tom Rini
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Tom Rini
• [U-Boot] [U-Boot-Board-Maintainers] [U-Boot-Custodians] [RFC] Eliminate boards not using CONFIG_DM=y   Tom Rini
• [U-Boot] [PATCH v3 1/6] fat: write: fix broken write to fragmented files   Tom Rini
• [U-Boot] [PATCH v3 2/6] fat: write: fix broken write at non-zero file offset   Tom Rini
• [U-Boot] [PATCH 1/2] Convert CONFIG_PHY_CORTINA to Kconfig   Tom Rini
• [U-Boot] [PATCH 2/2] Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to Kconfig   Tom Rini
• [U-Boot] [PATCH 1/2] pci: Only link pci_rom.o in some cases   Tom Rini
• [U-Boot] [PATCH 2/2] mtd: mtdcore: Drop unused mtd_table   Tom Rini
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Tom Rini
• [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC   Tom Rini
• [U-Boot] [PATCH] tbs2910: Disable VxWorks image booting support   Tom Rini
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Tom Rini
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Tom Rini
• [U-Boot] [PATCH] blk: Better guard some of our object files for linking   Tom Rini
• [U-Boot] [U-Boot-Custodians] [RFC] Eliminate boards not using CONFIG_DM=y   Tom Rini
• [U-Boot] [PATCH v1] gcc-9: silence 'address-of-packed-member' warning   Tom Rini
• [U-Boot] [PATCH v1] gcc-9: silence 'address-of-packed-member' warning   Tom Rini
• [U-Boot] [PATCH 0/5] board: ti: beagleboneai: add initial support   Caleb Robey
• [U-Boot] [PATCH 1/5] board: ti: beagleboneai: emmc read changes   Caleb Robey
• [U-Boot] [PATCH 2/5] board: ti: beagleboneai: add initial support   Caleb Robey
• [U-Boot] [PATCH 3/5] board: ti: beagleboneai: IODELAY and pinmux changes   Caleb Robey
• [U-Boot] [PATCH 4/5] board: ti: beagleboneai: add dts file   Caleb Robey
• [U-Boot] [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Caleb Robey
• [U-Boot] [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Robey, Caleb
• [U-Boot] [EXTERNAL] Re: [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Robey, Caleb
• [U-Boot] [PATCH v2 0/5] board: ti: beagleboneai: add initial support   Caleb Robey
• [U-Boot] [PATCH v2 1/5] board: ti: beagleboneai: emmc read changes   Caleb Robey
• [U-Boot] [PATCH v2 2/5] board: ti: beagleboneai: add initial support   Caleb Robey
• [U-Boot] [PATCH v2 3/5] board: ti: beagleboneai: IODELAY and pinmux changes   Caleb Robey
• [U-Boot] [PATCH v2 4/5] board: ti: beagleboneai: add dts file   Caleb Robey
• [U-Boot] [PATCH v2 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Caleb Robey
• [U-Boot] [PATCH] rockchip: rk3399: rock960: Update config for TPL   Peter Robinson
• [U-Boot] [PATCH] rockchip: rk3399: rock960: Update config for TPL   Peter Robinson
• [U-Boot] [PATCH 1/3] rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi   Peter Robinson
• [U-Boot] [PATCH 2/3] rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsi   Peter Robinson
• [U-Boot] [PATCH 3/3] rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi   Peter Robinson
• [U-Boot] [PATCH 1/3] rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi   Peter Robinson
• [U-Boot] [PATCH v2] rockchip: rk3399: split rockpro64 out of evb_rk3399   Peter Robinson
• [U-Boot] [PATCH] mtd: spi-nor: ids: Add GigaDevice gd25q128   Peter Robinson
• [U-Boot] [PATCH v2 1/3] rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to   Peter Robinson
• [U-Boot] [PATCH 1/3] rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi   Peter Robinson
• [U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support   Peter Robinson
• [U-Boot] [PATCH 1/4] arm64: dts: rk3399-rock960: add vdd_log and its init value   Peter Robinson
• [U-Boot] [PATCH 1/2] gpio: fix CONFIG_IS_ENABLED(DM_GPIO) for SPL   Stefan Roese
• [U-Boot] [PATCH 2/2] arm: mvebu: clearfog: fix boot from SD card   Stefan Roese
• [U-Boot] [PATCH 1/2] gpio: fix CONFIG_IS_ENABLED(DM_GPIO) for SPL   Stefan Roese
• [U-Boot] [PATCH 1/2] gpio: fix CONFIG_IS_ENABLED(DM_GPIO) for SPL   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: don't dereference null bd pointer   Stefan Roese
• [U-Boot] [PATCH 2/2] arm: mvebu: clearfog: fix boot from SD card   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH 3/5] smart-gateway-mt7688: Correct build time check for overwriting factory data   Stefan Roese
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Stefan Roese
• [U-Boot] [PATCHv2 1/5] smart-gateway-mt7688: Rework build time check for overwriting factory data   Stefan Roese
• [U-Boot] IO Error Propagation on Armada-385   Stefan Roese
• [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver   Stefan Roese
• [U-Boot] [PATCH 1/4] km/boards: fix typo for MAC address offset config option   Stefan Roese
• [U-Boot] [PATCH 2/4] km/boards: add MAC address offset as argument to ivm_populate_env   Stefan Roese
• [U-Boot] [PATCH 3/4] arm/km: remove board KMCOGE3UN   Stefan Roese
• [U-Boot] [PATCH 4/4] boards/km_arm: enable support for Macronix SPI NOR flash   Stefan Roese
• [U-Boot] [PATCH 2/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"   Stefan Roese
• [U-Boot] [PATCH] sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2   Diego Rondini
• [U-Boot] [PATCH v2] sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2   Diego Rondini
• [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command   Eugeniu Rosca
• [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command   Eugeniu Rosca
• [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command   Eugeniu Rosca
• [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command   Eugeniu Rosca
• [U-Boot] [PATCH 0/4] cmd: dtimg: Enhance with --id and --rev options (take #1)   Eugeniu Rosca
• [U-Boot] [PATCH 1/4] cmd: dtimg: Report invalid index argument   Eugeniu Rosca
• [U-Boot] [PATCH 2/4] cmd: dtimg: Merge duplicated prints   Eugeniu Rosca
• [U-Boot] [PATCH 3/4] cmd: dtimg: Make <varname> an optional argument   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] cmd: dtimg: Get start and size based on --id and --rev   Eugeniu Rosca
• [U-Boot] Using kernelCI infrastructure for firmware testing   Patrick Rudolph
• [U-Boot] [PATCH v5 0/2] Add board support for iMX8QXP AI_ML board   Manivannan Sadhasivam
• [U-Boot] [PATCH] board: Add support for iMX8QXP AI_ML board   Manivannan Sadhasivam
• [U-Boot] [PATCH 1/4] arm64: dts: rk3399-rock960: add vdd_log and its init value   Manivannan Sadhasivam
• [U-Boot] [ubiblock PATCH] Read-only block driver on top of UBI volumes   Juha Sarlin
• [U-Boot] [PATCH] blk: Check if_type in blk_get_devnum_by_typename   Juha Sarlin
• [U-Boot] [PATCH] blk: Check if_type in blk_get_devnum_by_typename   Juha Sarlin
• [U-Boot] flashing and testing u-boot on chromebook_bob   Sahaj Sarup
• [U-Boot] flashing and testing u-boot on chromebook_bob   Sahaj Sarup
• [U-Boot] [PATCH 4/7] pci: i2c: designware: Add compatible string   Heiko Schocher
• [U-Boot] [PATCH 6/7] i2c: designware: Drop invalid debugging   Heiko Schocher
• [U-Boot] [PATCH] bdinfo: show multi_dtb_fit   Heiko Schocher
• [U-Boot] [PATCH] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [U-Boot] [PATCH] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [U-Boot] [PATCH] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [U-Boot] U-Boot: problems with travis build   Heiko Schocher
• [U-Boot] [PATCH v2 0/2] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] env: split env_import_redund() into 2 functions   Heiko Schocher
• [U-Boot] [PATCH v2 2/2] env: Access Environment in SPI flashes before relocation   Heiko Schocher
• [U-Boot] [PATCH] travis: split NXP ARM32 job   Heiko Schocher
• [U-Boot] [PATCH] travis: split 32bit sun8i job   Heiko Schocher
• [U-Boot] [PATCH 1/3] i2c: add support for offset overflow in to address   Heiko Schocher
• [U-Boot] [PATCH 2/3] dm: i2c: EEPROM simulator allow tests visibility of addr and offset   Heiko Schocher
• [U-Boot] [PATCH 3/3] dm: i2c: EEPROM simulator add tests for addr offset mask   Heiko Schocher
• [U-Boot] [PATCH 1/2] misc: i2c_eeprom: add fixed partitions support   Heiko Schocher
• [U-Boot] [PATCH 2/2] misc: i2c_eeprom: add size query   Heiko Schocher
• [U-Boot] [PATCH] travis: split 32bit sun8i job   Heiko Schocher
• [U-Boot] [PATCH] travis: split NXP ARM32 job   Heiko Schocher
• [U-Boot] [PATCH v2] travis: rework NXP layerscape jobs   Heiko Schocher
• [U-Boot] [PATCH v2] travis: move orangepi to vendor job   Heiko Schocher
• [U-Boot] [PATCH v2] travis: rework NXP layerscape jobs   Heiko Schocher
• [U-Boot] [PATCH v3] travis: rework NXP layerscape jobs   Heiko Schocher
• [U-Boot] [PATCH 1/1] drivers: i2c: Add brcm iproc I2C driver support   Heiko Schocher
• [U-Boot] [PATCH v5 1/1] efi_loader: disk: install file system protocol to a whole disk   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] net: remove superfluous __packed attribute   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] net: avoid address-of-packed-member error   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error   Heinrich Schuchardt
• [U-Boot] [BUG] display_options() fails on Raspberry Pi 3B+   Heinrich Schuchardt
• [U-Boot] [PATCH] ARM: defconfig: add unified config for RPi3 and RPi4   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] efi_loader: support building UEFI binaries on sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/3] fdt: fix bcm283x dm-pre-reloc definitions   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS   Heinrich Schuchardt
• [U-Boot] test: Coverage error tools/binman/etype/cbfs.py 97% on i686   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] efi_loader: pytest on sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] sandbox: enable UEFI unit tests   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] sandbox: add missing compatible property in device tree   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] configs: sandbox: enable CONFIG_CMD_BOOTEFI_SELFTEST   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] serial: sandbox: support Unicode   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] sunxi: psci: avoid error address-of-packed-member   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/3] efi_loader: support building UEFI binaries on sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/3] efi_loader: call add_u_boot_and_runtime() on sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/3] efi_loader: support building UEFI binaries on sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/3] efi_selftest: enable all UEFI unit tests on the sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: call add_u_boot_and_runtime() on sandbox   Heinrich Schuchardt
• [U-Boot] [BUG] fs: fat: incorrect creation of files with Unicode file name   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc3   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [PATCH 01/16] include: pe.h: add signature-related definitions   Heinrich Schuchardt
• [U-Boot] [PATCH 02/16] include: image.h: export hash algorithm helper functions   Heinrich Schuchardt
• [U-Boot] [PATCH 05/16] efi_loader: add signature verification functions   Heinrich Schuchardt
• [U-Boot] [PATCH 07/16] efi_loader: variable: support variable authentication   Heinrich Schuchardt
• [U-Boot] [PATCH 12/16] cmd: env: use appropriate guid for authenticated UEFI variable   Heinrich Schuchardt
• [U-Boot] [PATCH 14/16] efi_loader, pytest: set up secure boot environment   Heinrich Schuchardt
• [U-Boot] [PATCH 15/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)   Heinrich Schuchardt
• [U-Boot] [PATCH 16/16] efi_loader, pytest: add UEFI secure boot tests (image)   Heinrich Schuchardt
• [U-Boot] [BUG] U-Boot hangs on fatload, commit ee88eacbdd840199a3dec707234579fb15ddd46a   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: restrict EFI_LOADER to armv7 and armv8 on ARM   Heinrich Schuchardt
• [U-Boot] Build warnings in libfdt   Heinrich Schuchardt
• [U-Boot] [PATCH 01/16] include: pe.h: add signature-related definitions   Heinrich Schuchardt
• [U-Boot] Build warnings in libfdt   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: remove unused function efi_dp_from_dev()   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: enable unaligned access on arm11   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] arm: arm11: allow unaligned memory access   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: enable EFI_LOADER on arm1136 and arm1176   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: enable EFI_LOADER on arm1136 and arm1176   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc4   Heinrich Schuchardt
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Heinrich Schuchardt
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Heinrich Schuchardt
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: fix -march for ARM11   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: default EFI_LOADER=n on ARM11   Heinrich Schuchardt
• [U-Boot] [BUG] usb: drivers/usb/gadget/composite.c fails to build   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] usb: composite: fix possible alignment issues   Heinrich Schuchardt
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Heinrich Schuchardt
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Heinrich Schuchardt
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] arm: fix -march for ARM11   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for efi-2020-01-rc4 (2)   Heinrich Schuchardt
• [U-Boot] [PATCH v4 0/7] usb: kbd: implement special keys   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/7] usb: kbd: fix typo   Heinrich Schuchardt
• [U-Boot] [PATCH v4 2/7] usb: kbd: signature of usb_kbd_put_queue()   Heinrich Schuchardt
• [U-Boot] [PATCH v4 3/7] usb: kbd: simplify coding for arrow keys   Heinrich Schuchardt
• [U-Boot] [PATCH v4 4/7] usb: kbd: implement special keys   Heinrich Schuchardt
• [U-Boot] [PATCH v4 5/7] usb: kbd: move USB_KBD_BOOT_REPORT_SIZE to usb.h   Heinrich Schuchardt
• [U-Boot] [PATCH v4 6/7] dm: test: usb: rework keyboard test   Heinrich Schuchardt
• [U-Boot] [PATCH v4 7/7] sandbox: enable USB_KEYBOARD_FN_KEYS   Heinrich Schuchardt
• [U-Boot] [PATCH] blk: Check if_type in blk_get_devnum_by_typename   Heinrich Schuchardt
• [U-Boot] [RFC PATCH 1/1] doc: net: Rewrite network driver documentation   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] bootm: Add a bootm command for type IH_OS_EFI   Heinrich Schuchardt
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Heinrich Schuchardt
• [U-Boot] [RFC] Eliminate boards not using CONFIG_DM=y   Heinrich Schuchardt
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: efidebug: fix a build error in show_efi_boot_opt()   Heinrich Schuchardt
• [U-Boot] [PATCH v2] cmd: efidebug: fix a build error in show_efi_boot_opt()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/16] include: pe.h: add signature-related definitions   Heinrich Schuchardt
• [U-Boot] [PATCH v3 01/16] linux_compat: move kmemdup() from ubifs.c to linux_compat.c   Heinrich Schuchardt
• [U-Boot] [PATCH v3 05/16] include: kernel.h: include printk.h   Heinrich Schuchardt
• [U-Boot] [PATCH v3 06/16] linux/time.h: include vsprintf.h   Heinrich Schuchardt
• [U-Boot] [PATCH v3 06/16] linux/time.h: include vsprintf.h   Heinrich Schuchardt
• [U-Boot] [PATCH] board_f.c: Insure gd->new_bootstage alignment   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: Add command to display or save Linux PStore dumps   Heinrich Schuchardt
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images   Heinrich Schuchardt
• [U-Boot] Load Debian/Fedora via EFI   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/2] sifive: fu540: Enable OF_SEPARATE   Andreas Schwab
• [U-Boot] [PATCH v4 31/42] common: Move ARM cache operations out of common.h   Daniel Schwierzeck
• [U-Boot] [PATCH v4 40/42] common: Move trap_init() out of common.h   Daniel Schwierzeck
• [U-Boot] [PULL] u-boot-mips   Daniel Schwierzeck
• [U-Boot] [PATCH v2] spl: imx: Use correct boot-device in spl_boot_mode   Harald Seiler
• [U-Boot] [PATCH 0/4] ARM: imx6: DHCOM i.MX6 PDK: Fixing reset   Harald Seiler
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Harald Seiler
• [U-Boot] [PATCH] arm64: lx2160a: dts: Fix UART node status   Vabhav Sharma
• [U-Boot] [PATCH 3/7] tpm: Add a driver for H1/Cr50   Andy Shevchenko
• [U-Boot] [PATCH 1/1] serial: sandbox: support Unicode   Andy Shevchenko
• [U-Boot] [PATCH v1 1/4] dfu: Drop unused prototype of dfu_trigger_reset()   Andy Shevchenko
• [U-Boot] [PATCH v1 2/4] dfu: Refactor do_dfu() to handle optional argument   Andy Shevchenko
• [U-Boot] [PATCH v1 3/4] dfu: Add optional timeout parameter   Andy Shevchenko
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Andy Shevchenko
• [U-Boot] [PATCH] arm: add acpi support for the arm   Andy Shevchenko
• [U-Boot] [PATCH] arm: add acpi support for the arm   Andy Shevchenko
• [U-Boot] [PATCH v3] arm: add acpi support for the arm   Andy Shevchenko
• [U-Boot] [PATCH v1 3/4] dfu: Add optional timeout parameter   Andy Shevchenko
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Andy Shevchenko
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Andy Shevchenko
• [U-Boot] [PATCH v2 1/4] dfu: Drop unused prototype of dfu_trigger_reset()   Andy Shevchenko
• [U-Boot] [PATCH v2 2/4] dfu: Refactor do_dfu() to handle optional argument   Andy Shevchenko
• [U-Boot] [PATCH v2 3/4] dfu: Add optional timeout parameter   Andy Shevchenko
• [U-Boot] [PATCH v2 4/4] x86: edison: Enable DFU timeout   Andy Shevchenko
• [U-Boot] [PATCH v1 4/4] x86: edison: Enable DFU timeout   Andy Shevchenko
• [U-Boot] [PATCH v1] gcc-9: silence 'address-of-packed-member' warning   Andy Shevchenko
• [U-Boot] [PATCH 1/2] gpio: fix CONFIG_IS_ENABLED(DM_GPIO) for SPL   Baruch Siach
• [U-Boot] [PATCH 2/2] arm: mvebu: clearfog: fix boot from SD card   Baruch Siach
• [U-Boot] [PATCH] mmc: sdhci: make sdhci_get_cd static   Baruch Siach
• [U-Boot] [PATCH 1/2] arm: dts: hummingboard: add cubox/hummingboard DT   Baruch Siach
• [U-Boot] [PATCH 2/2] mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB   Baruch Siach
• [U-Boot] [PATCH 1/2] gpio: fix CONFIG_IS_ENABLED(DM_GPIO) for SPL   Baruch Siach
• [U-Boot] [PATCH 1/2] arm: dts: hummingboard: add cubox/hummingboard DT   Baruch Siach
• [U-Boot] [PATCH] mx6cuboxi: Add Baruch as maintainer   Baruch Siach
• [U-Boot] [PATCH v2 1/4] dt-bindings: add imx-audmux macro definitions   Baruch Siach
• [U-Boot] [PATCH v2 2/4] arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)   Baruch Siach
• [U-Boot] [PATCH v2 3/4] arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)   Baruch Siach
• [U-Boot] [PATCH v2 4/4] mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB   Baruch Siach
• [U-Boot] [PATCH 00/10] ARM: clearfog: add run-time board detect   Baruch Siach
• [U-Boot] [PATCH 01/10] ddr: marvell: a38x: allow board specific clock out setup   Baruch Siach
• [U-Boot] [PATCH 02/10] arm: mvebu: clearfog: enable both DDR clocks   Baruch Siach
• [U-Boot] [PATCH 03/10] cmd: add sys_eeprom command   Baruch Siach
• [U-Boot] [PATCH 04/10] ARM: mvebu: clearfog: add EEPROM devices   Baruch Siach
• [U-Boot] [PATCH 05/10] ARM: mvebu: clearfog: add support for EEPROM TLV info   Baruch Siach
• [U-Boot] [PATCH 06/10] ARM: mvebu: clearfog: read basic TLV data   Baruch Siach
• [U-Boot] [PATCH 07/10] ARM: mvebu: clearfog: print TLV stored product name   Baruch Siach
• [U-Boot] [PATCH 08/10] ARM: mvebu: clearfog: run-time selection of DT file   Baruch Siach
• [U-Boot] [PATCH 09/10] ARM: mvebu: clearfog: add Clearfog GTR support   Baruch Siach
• [U-Boot] [PATCH 10/10] ARM: mvebu: clearfog: add Clearfog Base serdes configuration   Baruch Siach
• [U-Boot] [PATCH] usb: composite: add BOS descriptor support to composite framework   Michal Simek
• [U-Boot] [PATCH] xilinx: Do defconfig syncup   Michal Simek
• [U-Boot] [PATCH] xilinx: Do defconfig syncup   Michal Simek
• [U-Boot] [PATCH] zynq: Add jtag distro boot support   Michal Simek
• [U-Boot] [PATCH 0/8] net: phy: dp83867: ti: sync with linux kernel and   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Point zcu216 defconfig to correct dts file   Michal Simek
• [U-Boot] [RFC PATCH] spi: spi-nor: Add dual flash support in spi-nor framework   Michal Simek
• [U-Boot] Load Debian/Fedora via EFI   Michal Simek
• [U-Boot] [EXT] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver   Kuldeep Singh
• [U-Boot] [EXT] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver   Kuldeep Singh
• [U-Boot] [EXT] [PATCH v3 1/3] spi: nxp_fspi: new driver for the FlexSPI controller   Kuldeep Singh
• [U-Boot] [PATCH 1/4] arm: dts: ls1028a: Add FSPI node properties   Kuldeep Singh
• [U-Boot] [PATCH 2/4] arm: dts: lx2160a: Add FSPI node properties   Kuldeep Singh
• [U-Boot] [PATCH 3/4] configs: ls1028a: Enable FSPI support   Kuldeep Singh
• [U-Boot] [PATCH 4/4] configs: lx2160a: Enable FSPI support   Kuldeep Singh
• [U-Boot] [Patch v5 1/4] fsl-lsch3: Add FlexSPI address space in immap_lsch3   Kuldeep Singh
• [U-Boot] [Patch v5 2/4] fsl-lsch3: soc: Enable AHB read support for Flexspi controller   Kuldeep Singh
• [U-Boot] [Patch v5 3/4] configs: ls1028a: Enable FSPI_AHB_EN_4B config   Kuldeep Singh
• [U-Boot] [Patch v5 4/4] configs: lx2160a: Enable FSPI_AHB_EN_4B config   Kuldeep Singh
• [U-Boot] [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework   Kuldeep Singh
• [U-Boot] [PATCH 1/8] spi: Remove old freescale qspi driver   Kuldeep Singh
• [U-Boot] [PATCH 2/8] spi: Transform the FSL QuadSPI driver to use the SPI MEM API   Kuldeep Singh
• [U-Boot] [PATCH 3/8] treewide: Remove unused FSL QSPI config options   Kuldeep Singh
• [U-Boot] [PATCH 4/8] configs: ls1043a: Move CONFIG_FSL_QSPI to defconfig   Kuldeep Singh
• [U-Boot] [PATCH 5/8] imx: imx6sx: Remove unused 'num-cs' property   Kuldeep Singh
• [U-Boot] [PATCH 6/8] configs: ls1012a: Enable SPI_FLASH_SPANSION in defconfig   Kuldeep Singh
• [U-Boot] [PATCH 7/8] configs: ls1046a: Move SPI_FLASH_SPANSION to defconfig   Kuldeep Singh
• [U-Boot] [PATCH 8/8] treewide: Update fsl qspi node dt properties as per spi-mem driver   Kuldeep Singh
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Maksym Sloyko
• [U-Boot] [PATCH] net: ftgmac100: align RX/TX descriptors on ARCH_DMA_MINALIGN   Joel Stanley
• [U-Boot] [PATCH] net: cpsw: Add NULL pointer check   Grygorii Strashko
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Grygorii Strashko
• [U-Boot] [PATCH 02/11] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager   Grygorii Strashko
• [U-Boot] [PATCH 0/8] net: phy: dp83867: ti: sync with linux kernel and   Grygorii Strashko
• [U-Boot] [PATCH 1/8] net: phy: ti: rename ti.c to dp83867.c   Grygorii Strashko
• [U-Boot] [PATCH 2/8] net: phy: dp83867: move static initialization to .probe()   Grygorii Strashko
• [U-Boot] [PATCH 3/8] dt-bindings: phy: dp83867: Add documentation for disabling clock output   Grygorii Strashko
• [U-Boot] [PATCH 4/8] net: phy: dp83867: Add ability to disable output clock   Grygorii Strashko
• [U-Boot] [PATCH 5/8] net: phy: dp83867: rework delay rgmii delay handling   Grygorii Strashko
• [U-Boot] [PATCH 6/8] net: phy: dp83867: io impedance is not dependent on RGMII delay   Grygorii Strashko
• [U-Boot] [PATCH 7/8] net: phy: dp83867: refactor rgmii configuration   Grygorii Strashko
• [U-Boot] [PATCH 8/8] arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid   Grygorii Strashko
• [U-Boot] [PATCH] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig   Grygorii Strashko
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Grygorii Strashko
• [U-Boot] [PATCH] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig   Grygorii Strashko
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Grygorii Strashko
• [U-Boot] [PATCH v2] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig   Grygorii Strashko
• [U-Boot] [PATCH v4 4/5] doc: bindings: add mdio-handle property to ethernet nodes   Grygorii Strashko
• [U-Boot] [PATCH 0/6] J721e: Add networking support   Grygorii Strashko
• [U-Boot] [PATCH] board: ti: dra7-evm: remove net platform code   Grygorii Strashko
• [U-Boot] [PATCH] board: ti: am43xx: remove net platform code   Grygorii Strashko
• [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command   Roman Stratiienko
• [U-Boot] [PATCH v2 1/2] rockchip: clk: rv1108: remove duplicate reset init   Heiko Stuebner
• [U-Boot] [PATCH v2 2/2] rockchip: clk: fix wrong CONFIG_IS_ENABLED handling   Heiko Stuebner
• [U-Boot] [PATCH 1/2] rockchip: clk: rv1108: remove duplicate reset init   Heiko Stuebner
• [U-Boot] [PATCH 11/12] rockchip: add px30 architecture core   Heiko Stuebner
• [U-Boot] [PATCH] rockchip: px30: enable fifo mode for both emmc and sdmmc on evb   Heiko Stuebner
• [U-Boot] [PATCH v2 1/2] rockchip: dwmmc: add handling for u-boot, spl-fifo-mode   Heiko Stuebner
• [U-Boot] [PATCH v2 2/2] rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb   Heiko Stuebner
• [U-Boot] [PATCH 1/2] rockchip: px30: Fixup PMUGRF registers layout order   Heiko Stuebner
• [U-Boot] [PATCH 2/2] rockchip: px30: Add support for using UART3 as debug UART   Heiko Stuebner
• [U-Boot] [PATCH 1/2] rockchip: misc: don't fail if eth_addr already set   Heiko Stuebner
• [U-Boot] [PATCH 2/2] rockchip: misc: protect serial# from getting overwritten   Heiko Stuebner
• [U-Boot] [PATCH v2 1/2] rockchip: make_fit_atf.py: allow inclusion of a tee binary   Heiko Stübner
• [U-Boot] [PATCH 1/2] rockchip: clk: rv1108: remove duplicate reset init   Heiko Stübner
• [U-Boot] [PATCH v3 1/4] fdtdec: protect against another NULL phandlep in fdtdec_add_reserved_memory()   Heiko Stübner
• [U-Boot] [PATCH v3 2/4] fdtdec: only create phandle if caller wants it in fdtdec_add_reserved_memory()   Heiko Stübner
• [U-Boot] [PATCH v3 4/4] tests: add OP-TEE test suite   Heiko Stübner
• [U-Boot] [PATCH v2 2/2] rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb   Heiko Stübner
• [U-Boot] Quickboot in u-boot   Pankaj Suryawanshi
• [U-Boot] [External] Re: Quickboot in u-boot   Pankaj Suryawanshi
• [U-Boot] [PATCH v2 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Marek Szyprowski
• [U-Boot] [PATCH v3 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Marek Szyprowski
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Marek Szyprowski
• [U-Boot] [PATCH v3 0/6] Raspberry Pi4: add support for DFU over USB   Marek Szyprowski
• [U-Boot] [PATCH v3 1/6] fat: write: fix broken write to fragmented files   Marek Szyprowski
• [U-Boot] [PATCH v3 2/6] fat: write: fix broken write at non-zero file offset   Marek Szyprowski
• [U-Boot] [PATCH v3 3/6] dfu: mmc: rearrange the code   Marek Szyprowski
• [U-Boot] [PATCH v3 4/6] dfu: mmc: remove file size limit for io operations   Marek Szyprowski
• [U-Boot] [PATCH v3 5/6] usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support   Marek Szyprowski
• [U-Boot] [PATCH v3 6/6] config: enable DFU over USB on Raspberry Pi4 boards   Marek Szyprowski
• [U-Boot] [GIT PULL] Raspberry Pi updates for v2020.01   Marek Szyprowski
• [U-Boot] [PATCH v3 1/6] fat: write: fix broken write to fragmented files   Marek Szyprowski
• [U-Boot] [PATCH v3 2/6] fat: write: fix broken write at non-zero file offset   Marek Szyprowski
• [U-Boot] required host packages on Travis CI   AKASHI Takahiro
• [U-Boot] [PATCH v5 00/19] efi_loader: non-volatile variables support   AKASHI Takahiro
• [U-Boot] [PATCH v5 00/19] efi_loader: non-volatile variables support   AKASHI Takahiro
• [U-Boot] required host packages on Travis CI   AKASHI Takahiro
• [U-Boot] [PATCH] cmd: move down CONFIG_CMD_BOOTEFI after CONFIG_BOOTM_VXWORKS   AKASHI Takahiro
• [U-Boot] [PATCH v3 00/16] import x509/pkcs7 parsers from linux   AKASHI Takahiro
• [U-Boot] [PATCH v3 01/16] linux_compat: move kmemdup() from ubifs.c to linux_compat.c   AKASHI Takahiro
• [U-Boot] [PATCH v3 02/16] rtc.h: add struct udevice declaration   AKASHI Takahiro
• [U-Boot] [PATCH v3 03/16] rtc: move date.c from drivers/rtc/ to lib/   AKASHI Takahiro
• [U-Boot] [PATCH v3 04/16] lib: add mktime64() for linux compatibility   AKASHI Takahiro
• [U-Boot] [PATCH v3 05/16] include: kernel.h: include printk.h   AKASHI Takahiro
• [U-Boot] [PATCH v3 06/16] linux/time.h: include vsprintf.h   AKASHI Takahiro
• [U-Boot] [PATCH v3 07/16] cmd: add asn1_compiler   AKASHI Takahiro
• [U-Boot] [PATCH v3 08/16] Makefile: add build script for asn1 parsers   AKASHI Takahiro
• [U-Boot] [PATCH v3 09/16] lib: add asn1 decoder   AKASHI Takahiro
• [U-Boot] [PATCH v3 10/16] doc: add README for asn1 compiler and decoder   AKASHI Takahiro
• [U-Boot] [PATCH v3 11/16] lib: add oid registry utility   AKASHI Takahiro
• [U-Boot] [PATCH v3 12/16] lib: crypto: add public key utility   AKASHI Takahiro
• [U-Boot] [PATCH v3 13/16] lib: crypto: add rsa public key parser   AKASHI Takahiro
• [U-Boot] [PATCH v3 14/16] lib: crypto: add x509 parser   AKASHI Takahiro
• [U-Boot] [PATCH v3 15/16] lib: crypto: add pkcs7 message parser   AKASHI Takahiro
• [U-Boot] [PATCH v3 16/16] test: add asn1 unit test   AKASHI Takahiro
• [U-Boot] [PATCH v3 0/6] rsa: extend rsa_verify() for UEFI secure boot   AKASHI Takahiro
• [U-Boot] [PATCH v3 1/6] lib: rsa: decouple rsa from FIT image verification   AKASHI Takahiro
• [U-Boot] [PATCH v3 2/6] rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config   AKASHI Takahiro
• [U-Boot] [PATCH v3 3/6] include: image.h: add key info to image_sign_info   AKASHI Takahiro
• [U-Boot] [PATCH v3 4/6] lib: rsa: generate additional parameters for public key   AKASHI Takahiro
• [U-Boot] [PATCH v3 5/6] lib: rsa: add rsa_verify_with_pkey()   AKASHI Takahiro
• [U-Boot] [PATCH v3 6/6] test: add rsa_verify() unit test   AKASHI Takahiro
• [U-Boot] [PATCH 00/16] efi_loader: add secure boot support   AKASHI Takahiro
• [U-Boot] [PATCH 01/16] include: pe.h: add signature-related definitions   AKASHI Takahiro
• [U-Boot] [PATCH 02/16] include: image.h: export hash algorithm helper functions   AKASHI Takahiro
• [U-Boot] [PATCH 03/16] secure boot: rename CONFIG_SECURE_BOOT config option   AKASHI Takahiro
• [U-Boot] [PATCH 04/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option   AKASHI Takahiro
• [U-Boot] [PATCH 05/16] efi_loader: add signature verification functions   AKASHI Takahiro
• [U-Boot] [PATCH 06/16] efi_loader: add signature database parser   AKASHI Takahiro
• [U-Boot] [PATCH 07/16] efi_loader: variable: support variable authentication   AKASHI Takahiro
• [U-Boot] [PATCH 08/16] efi_loader: variable: add secure boot state transition   AKASHI Takahiro
• [U-Boot] [PATCH 09/16] efi_loader: variable: add VendorKeys variable   AKASHI Takahiro
• [U-Boot] [PATCH 10/16] efi_loader: image_loader: support image authentication   AKASHI Takahiro
• [U-Boot] [PATCH 11/16] efi_loader: set up secure boot   AKASHI Takahiro
• [U-Boot] [PATCH 12/16] cmd: env: use appropriate guid for authenticated UEFI variable   AKASHI Takahiro
• [U-Boot] [PATCH 13/16] cmd: env: add "-at" option to "env set -e" command   AKASHI Takahiro
• [U-Boot] [PATCH 14/16] efi_loader, pytest: set up secure boot environment   AKASHI Takahiro
• [U-Boot] [PATCH 15/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)   AKASHI Takahiro
• [U-Boot] [PATCH 16/16] efi_loader, pytest: add UEFI secure boot tests (image)   AKASHI Takahiro
• [U-Boot] [PATCH 00/16] efi_loader: add secure boot support   AKASHI Takahiro
• [U-Boot] [PATCH 01/16] include: pe.h: add signature-related definitions   AKASHI Takahiro
• [U-Boot] [PATCH 14/16] efi_loader, pytest: set up secure boot environment   AKASHI Takahiro
• [U-Boot] [PATCH 15/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)   AKASHI Takahiro
• [U-Boot] [PATCH 16/16] efi_loader, pytest: add UEFI secure boot tests (image)   AKASHI Takahiro
• [U-Boot] [PATCH 02/16] include: image.h: export hash algorithm helper functions   AKASHI Takahiro
• [U-Boot] [PATCH 12/16] cmd: env: use appropriate guid for authenticated UEFI variable   AKASHI Takahiro
• [U-Boot] [PATCH 01/16] include: pe.h: add signature-related definitions   AKASHI Takahiro
• [U-Boot] [PATCH 07/16] efi_loader: variable: support variable authentication   AKASHI Takahiro
• [U-Boot] [PATCH 05/16] efi_loader: add signature verification functions   AKASHI Takahiro
• [U-Boot] [PATCH 05/16] efi_loader: add signature verification functions   AKASHI Takahiro
• [U-Boot] [PATCH 05/16] efi_loader: add signature verification functions   AKASHI Takahiro
• [U-Boot] [PATCH] env: Provide programmatic equivalent to 'setenv -f'   AKASHI Takahiro
• [U-Boot] [PATCH 15/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)   AKASHI Takahiro
• [U-Boot] [PATCH v3 3/6] include: image.h: add key info to image_sign_info   AKASHI Takahiro
• [U-Boot] [PATCH v3 4/6] lib: rsa: generate additional parameters for public key   AKASHI Takahiro
• [U-Boot] [PATCH v3 5/6] lib: rsa: add rsa_verify_with_pkey()   AKASHI Takahiro
• [U-Boot] [PATCH v3 6/6] test: add rsa_verify() unit test   AKASHI Takahiro
• [U-Boot] [PATCH v4 0/6] rsa: extend rsa_verify() for UEFI secure boot   AKASHI Takahiro
• [U-Boot] [PATCH v4 1/6] lib: rsa: decouple rsa from FIT image verification   AKASHI Takahiro
• [U-Boot] [PATCH v4 2/6] rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config   AKASHI Takahiro
• [U-Boot] [PATCH v4 3/6] include: image.h: add key info to image_sign_info   AKASHI Takahiro
• [U-Boot] [PATCH v4 4/6] lib: rsa: generate additional parameters for public key   AKASHI Takahiro
• [U-Boot] [PATCH v4 5/6] lib: rsa: add rsa_verify_with_pkey()   AKASHI Takahiro
• [U-Boot] [PATCH v4 6/6] test: add rsa_verify() unit test   AKASHI Takahiro
• [U-Boot] [RFC] more features enabled on sandbox?   AKASHI Takahiro
• [U-Boot] [PATCH v2 00/16] efi_loader: add secure boot support   AKASHI Takahiro
• [U-Boot] [PATCH v2 01/16] include: pe.h: add signature-related definitions   AKASHI Takahiro
• [U-Boot] [PATCH v2 02/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option   AKASHI Takahiro
• [U-Boot] [PATCH v2 03/16] efi_loader: add signature verification functions   AKASHI Takahiro
• [U-Boot] [PATCH v2 04/16] efi_loader: add signature database parser   AKASHI Takahiro
• [U-Boot] [PATCH v2 05/16] efi_loader: variable: support variable authentication   AKASHI Takahiro
• [U-Boot] [PATCH v2 06/16] efi_loader: variable: add secure boot state transition   AKASHI Takahiro
• [U-Boot] [PATCH v2 07/16] efi_loader: variable: add VendorKeys variable   AKASHI Takahiro
• [U-Boot] [PATCH v2 08/16] efi_loader: image_loader: support image authentication   AKASHI Takahiro
• [U-Boot] [PATCH v2 09/16] efi_loader: set up secure boot   AKASHI Takahiro
• [U-Boot] [PATCH v2 10/16] cmd: env: use appropriate guid for authenticated UEFI variable   AKASHI Takahiro
• [U-Boot] [PATCH v2 11/16] cmd: env: add "-at" option to "env set -e" command   AKASHI Takahiro
• [U-Boot] [PATCH v2 12/16] efi_loader, pytest: set up secure boot environment   AKASHI Takahiro
• [U-Boot] [PATCH v2 13/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)   AKASHI Takahiro
• [U-Boot] [PATCH v2 14/16] efi_loader, pytest: add UEFI secure boot tests (image)   AKASHI Takahiro
• [U-Boot] [PATCH v2 15/16] sandbox: add extra configurations for UEFI and related tests   AKASHI Takahiro
• [U-Boot] [PATCH v2 16/16] travis: add packages for UEFI secure boot test   AKASHI Takahiro
• [U-Boot] [PATCH] cmd: efidebug: fix a build error in show_efi_boot_opt()   AKASHI Takahiro
• [U-Boot] [PATCH] cmd: efidebug: fix a build error in show_efi_boot_opt()   AKASHI Takahiro
• [U-Boot] [PATCH v2] cmd: efidebug: fix a build error in show_efi_boot_opt()   AKASHI Takahiro
• [U-Boot] [PATCH v2 00/16] efi_loader: add secure boot support   AKASHI Takahiro
• [U-Boot] [PATCH] test/py: test_fs: add tests for creating/deleting many files   AKASHI Takahiro
• [U-Boot] [PATCH] fs: fat: handle deleted directory entries correctly   AKASHI Takahiro
• [U-Boot] [PATCH v3 05/16] include: kernel.h: include printk.h   AKASHI Takahiro
• [U-Boot] [PATCH v3 06/16] linux/time.h: include vsprintf.h   AKASHI Takahiro
• [U-Boot] [PATCH v2 03/16] efi_loader: add signature verification functions   AKASHI Takahiro
• [U-Boot] [PATCH v3 1/6] fat: write: fix broken write to fragmented files   AKASHI Takahiro
• [U-Boot] [PATCH v3 2/6] fat: write: fix broken write at non-zero file offset   AKASHI Takahiro
• [U-Boot] [PATCH] fs: fat: handle deleted directory entries correctly   AKASHI Takahiro
• [U-Boot] [PATCH v2 2/3] env: Tidy up some of the env code   AKASHI Takahiro
• [U-Boot] [BUG] fs: fat: incorrect creation of files with Unicode file name   AKASHI Takahiro
• [U-Boot] [PATCH v5 0/4] arm: socfpga: Convert drivers from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Ley Foon Tan
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 3/4] arm: socfpga: Convert system manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 4/4] arm: socfpga: Convert clock manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Ley Foon Tan
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 3/4] arm: socfpga: Convert system manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v6 0/4] arm: socfpga: Convert drivers from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v6 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Ley Foon Tan
• [U-Boot] [PATCH v6 2/4] arm: socfpga: Convert reset manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v6 3/4] arm: socfpga: Convert system manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH v6 4/4] arm: socfpga: Convert clock manager from struct to defines   Ley Foon Tan
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Ley Foon Tan
• [U-Boot] [PATCH] arm: dts: Stratix10: Fix memory node address and size cells   Ley Foon Tan
• [U-Boot] [PATCH] configs: Stratix10: Disable CONFIG_SPL_USE_TINY_PRINTF   Ley Foon Tan
• [U-Boot] [PATCH v6 00/19] Add Intel Agilex SoC support   Ley Foon Tan
• [U-Boot] [PATCH v6 01/19] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v6 02/19] arm: socfpga: Move firewall code to firewall file   Ley Foon Tan
• [U-Boot] [PATCH v6 03/19] arm: socfpga: Move Stratix10 and Agilex reset manager common code   Ley Foon Tan
• [U-Boot] [PATCH v6 04/19] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH v6 05/19] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH v6 06/19] arm: socfpga: agilex: Add system manager support   Ley Foon Tan
• [U-Boot] [PATCH v6 07/19] arm: socfpga: Move Stratix10 and Agilex clock manager common code   Ley Foon Tan
• [U-Boot] [PATCH v6 08/19] arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHz   Ley Foon Tan
• [U-Boot] [PATCH v6 09/19] clk: agilex: Add clock driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v6 10/19] arm: socfpga: agilex: Add clock wrapper functions   Ley Foon Tan
• [U-Boot] [PATCH v6 11/19] cache: Add Arteris Ncore cache coherent unit driver   Ley Foon Tan
• [U-Boot] [PATCH v6 12/19] arm: agilex: Add clock handoff offset for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v6 13/19] ddr: altera: Restructure Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH v6 14/19] ddr: altera: agilex: Add SDRAM driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v6 15/19] board: intel: agilex: Add socdk board support for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v6 16/19] arm: socfpga: agilex: Add SPL for Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v6 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v6 18/19] configs: socfpga: Move Stratix10 and Agilex common CONFIGs   Ley Foon Tan
• [U-Boot] [PATCH v6 19/19] arm: socfpga: agilex: Enable Agilex SoC build   Ley Foon Tan
• [U-Boot] [PATCH v2 0/4] usb: host: dwc2: use driver model for PHY and CLOCK   Tan, Ley Foon
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Tan, Ley Foon
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Tan, Ley Foon
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Tan, Ley Foon
• [U-Boot] [PATCH v1] arm: socfpga: Enable Stratix10 SMMU access   Tan, Ley Foon
• [U-Boot] [PATCH v6 19/19] arm: socfpga: agilex: Enable Agilex SoC build   Ley Foon Tan
• [U-Boot] [PATCH v6 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v6 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH 1/2] ARM: socfpga: Actually put bridges into reset on Gen5 in bridge disable   Tan, Ley Foon
• [U-Boot] [PATCH 2/2] ARM: socfpga: Purge pending transactions upon enabling bridges on Gen5   Tan, Ley Foon
• [U-Boot] [PATCH] ARM: socfpga: Unreset NAND in SPL on Gen5   Tan, Ley Foon
• [U-Boot] [PATCH] ARM: socfpga: Introduce u-boot-with-nand-spl.sfp target   Tan, Ley Foon
• [U-Boot] [PATCH] ARM: socfpga: Add ArriaV ST/SX ID   Tan, Ley Foon
• [U-Boot] [PATCH] arm: dts: Stratix10: change pad skew values for EMAC0 PHY driver   Tan, Ley Foon
• [U-Boot] [PATCH] ARM: socfpga: Unreset NAND in SPL on Gen5   Tan, Ley Foon
• [U-Boot] [PATCH] arm: socfpga: stratix10: Add alias for gmac0 in S10 dts   Tan, Ley Foon
• [U-Boot] [PATCH] spi: cadence_qspi_apb: fix QSPI write issues   Tan, Ley Foon
• [U-Boot] [PATCH v7 00/19] Add Intel Agilex SoC support   Ley Foon Tan
• [U-Boot] [PATCH v7 01/19] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v7 02/19] arm: socfpga: Move firewall code to firewall file   Ley Foon Tan
• [U-Boot] [PATCH v7 03/19] arm: socfpga: Move Stratix10 and Agilex reset manager common code   Ley Foon Tan
• [U-Boot] [PATCH v7 04/19] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH v7 05/19] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH v7 06/19] arm: socfpga: agilex: Add system manager support   Ley Foon Tan
• [U-Boot] [PATCH v7 07/19] arm: socfpga: Move Stratix10 and Agilex clock manager common code   Ley Foon Tan
• [U-Boot] [PATCH v7 08/19] arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHz   Ley Foon Tan
• [U-Boot] [PATCH v7 09/19] clk: agilex: Add clock driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v7 10/19] arm: socfpga: agilex: Add clock wrapper functions   Ley Foon Tan
• [U-Boot] [PATCH v7 11/19] cache: Add Arteris Ncore cache coherent unit driver   Ley Foon Tan
• [U-Boot] [PATCH v7 12/19] arm: agilex: Add clock handoff offset for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v7 13/19] ddr: altera: Restructure Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH v7 14/19] ddr: altera: agilex: Add SDRAM driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v7 15/19] board: intel: agilex: Add socdk board support for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v7 16/19] arm: socfpga: agilex: Add SPL for Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v7 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v7 18/19] configs: socfpga: Move Stratix10 and Agilex common CONFIGs   Ley Foon Tan
• [U-Boot] [PATCH v7 19/19] arm: socfpga: agilex: Enable Agilex SoC build   Ley Foon Tan
• [U-Boot] [PATCH v7 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Tan, Ley Foon
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Ley Foon Tan
• [U-Boot] [PATCH v7 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v8 00/19] Add Intel Agilex SoC support   Ley Foon Tan
• [U-Boot] [PATCH v8 01/19] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v8 02/19] arm: socfpga: Move firewall code to firewall file   Ley Foon Tan
• [U-Boot] [PATCH v8 03/19] arm: socfpga: Move Stratix10 and Agilex reset manager common code   Ley Foon Tan
• [U-Boot] [PATCH v8 04/19] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH v8 05/19] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH v8 06/19] arm: socfpga: agilex: Add system manager support   Ley Foon Tan
• [U-Boot] [PATCH v8 07/19] arm: socfpga: Move Stratix10 and Agilex clock manager common code   Ley Foon Tan
• [U-Boot] [PATCH v8 08/19] arm: socfpga: Fix CLKMGR_INTOSC_HZ to 400MHz   Ley Foon Tan
• [U-Boot] [PATCH v8 09/19] clk: agilex: Add clock driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v8 10/19] arm: socfpga: agilex: Add clock wrapper functions   Ley Foon Tan
• [U-Boot] [PATCH v8 11/19] cache: Add Arteris Ncore cache coherent unit driver   Ley Foon Tan
• [U-Boot] [PATCH v8 12/19] arm: agilex: Add clock handoff offset for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v8 13/19] ddr: altera: Restructure Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH v8 14/19] ddr: altera: agilex: Add SDRAM driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH v8 15/19] board: intel: agilex: Add socdk board support for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v8 16/19] arm: socfpga: agilex: Add SPL for Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v8 18/19] configs: socfpga: Move Stratix10 and Agilex common CONFIGs   Ley Foon Tan
• [U-Boot] [PATCH v8 19/19] arm: socfpga: agilex: Enable Agilex SoC build   Ley Foon Tan
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Ley Foon Tan
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH v8 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH] spl: Allow cache drivers to be used in SPL   Ley Foon Tan
• [U-Boot] [PATCH v2] spl: Allow cache drivers to be used in SPL   Ley Foon Tan
• [U-Boot] [PATCH v3] armv8: ls1028a: Add environment variables to facilitate the boot   Yuantian Tang
• [U-Boot] [PATCH] configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig   Jagan Teki
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Jagan Teki
• [U-Boot] USB doesn't work on Rockpro64 in u-boot   Jagan Teki
• [U-Boot] [PATCH v3 1/2] riscv: dts: Add hifive-unleashed-a00 dts from Linux   Jagan Teki
• [U-Boot] [PATCH v3 2/2] sifive: fu540: Enable OF_SEPARATE   Jagan Teki
• [U-Boot] [PATCH v2 5/5] sifive: fu540: Enable spi-nor flash support   Jagan Teki
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Jagan Teki
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Jagan Teki
• [U-Boot] [PATCH v4 7/7] doc: boards: Add rockchip documentation   Jagan Teki
• [U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery   Jagan Teki
• [U-Boot] [PATCH v4 1/2] riscv: dts: Add hifive-unleashed-a00 dts from Linux   Jagan Teki
• [U-Boot] [PATCH v4 2/2] sifive: fu540: Enable OF_SEPARATE   Jagan Teki
• [U-Boot] [PATCH 7/9] gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUM   Jagan Teki
• [U-Boot] [PATCH v2 00/10] rockchip: rk3399: Add fastboot support   Jagan Teki
• [U-Boot] [PATCH v2 01/10] gadget: Select USB_GADGET_MANUFACTURER for rockchip   Jagan Teki
• [U-Boot] [PATCH v2 02/10] gadget: Select USB_GADGET_VENDOR_NUM for rockchip   Jagan Teki
• [U-Boot] [PATCH v2 03/10] gadget: rockchip: USB_GADGET_PRODUCT_NUM   Jagan Teki
• [U-Boot] [PATCH v2 04/10] gadget: rockchip: Add rk3128 USB_GADGET_PRODUCT_NUM   Jagan Teki
• [U-Boot] [PATCH v2 05/10] fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV]   Jagan Teki
• [U-Boot] [PATCH v2 06/10] fastboot: rockchip: Fix rk3328 default mmc device   Jagan Teki
• [U-Boot] [PATCH v2 07/10] usb: dwc3: Add phy interface for dwc3_uboot   Jagan Teki
• [U-Boot] [PATCH v2 08/10] gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUM   Jagan Teki
• [U-Boot] [PATCH v2 09/10] rockchip: Setup dwc3_device (for non-dm gadgets)   Jagan Teki
• [U-Boot] [PATCH v2 10/10] rock960: Enable USB Gadget   Jagan Teki
• [U-Boot] [PATCH 1/1] net: sun8i_emac: Remove debug message   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH] sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2   Jagan Teki
• [U-Boot] [PATCH 1/1] sunxi: psci: avoid error address-of-packed-member   Jagan Teki
• [U-Boot] GPT overlap on i.MX6   Jagan Teki
• [U-Boot] [PATCH v3 06/22] ram: rockchip: add common code for sdram driver   Jagan Teki
• [U-Boot] GPT overlap on i.MX6   Jagan Teki
• [U-Boot] Reboot is broken on RockPro64 with mainline u-boot and ATF   Jagan Teki
• [U-Boot] GPT overlap on i.MX6   Jagan Teki
• [U-Boot] [PATCH v1] arm: socfpga: Enable Stratix10 SMMU access   Thor Thayer
• [U-Boot] [PATCH] ddr: fsl: Impl. Erratum A008109   Joakim Tjernlund
• [U-Boot] [PATCH] ddr: fsl: Impl. Erratum A008109   Joakim Tjernlund
• [U-Boot] [PATCH] mpc85xx: ddr: Always start DDR RAM in Self Refresh mode   Joakim Tjernlund
• [U-Boot] [PATCH] rockchip: px30: enable fifo mode for both emmc and sdmmc on evb   Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] rockchip: dwmmc: add handling for u-boot, spl-fifo-mode   Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] rockchip: dwmmc: add handling for u-boot, spl-fifo-mode   Philipp Tomsich
• [U-Boot] [PATCH v2 2/2] rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb   Philipp Tomsich
• [U-Boot] [PATCH 3/4] rockchip: px5: enable spl-fifo-mode for emmc for px5-evb   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: px30: Add support for using UART3 as debug UART   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: Fix spl boot order path of booting device   Michael Trimarchi
• [U-Boot] [PATCH] rockchip: dts: tinker: Add tinker-s board support   Michael Trimarchi
• [U-Boot] [PATCH V2] rockchip: dts: tinker: Add tinker-s board support   Michael Trimarchi
• [U-Boot] [PATCH] .gitignore: Ignore .img files   Michael Trimarchi
• [U-Boot] [PATCH] .gitignore: Ignore .img files   Michael Trimarchi
• [U-Boot] [PATCH 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section   Michael Trimarchi
• [U-Boot] [PATCH 2/2] rockchip: dts: tinker: Add tinker-s board support   Michael Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Michael Trimarchi
• [U-Boot] [PATCH] rockchip: rk3288: Fix dwc2 gadget registration   Michael Trimarchi
• [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section   Michael Trimarchi
• [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support   Michael Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery   Michael Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery   Michael Trimarchi
• [U-Boot] Best way to use UCLASS_GPIO board id   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 3/3] Makefile: add Rockchip idbloader.img to CLEAN_FILES   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering   Michael Nazzareno Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Michael Nazzareno Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Michael Nazzareno Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] rockchip: rk3288: Fix dwc2 gadget registration   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] rockchip: rk3288: Fix dwc2 gadget registration   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] rockchip: Fix spl boot order path of booting device   Michael Nazzareno Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 2/2] rockchip: dts: tinker: Add tinker-s board support   Michael Nazzareno Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery   Michael Nazzareno Trimarchi
• [U-Boot] Best way to use UCLASS_GPIO board id   Michael Nazzareno Trimarchi
• [U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 4/4] sunxi: board: fixup the BT address for Orange Pi 3   Chen-Yu Tsai
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (06.11.2019)   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (06.11.2019)   Marek Vasut
• [U-Boot] [RESEND PATCH 1/5] usb: host: dwc2: add phy support   Marek Vasut
• [U-Boot] [RESEND PATCH 2/5] usb: host: dwc2: add support for clk   Marek Vasut
• [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (06.11.2019)   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Marek Vasut
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Marek Vasut
• [U-Boot] [PATCH v5 3/4] arm: socfpga: Convert system manager from struct to defines   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Marek Vasut
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Marek Vasut
• [U-Boot] [PATCH v5 2/4] arm: socfpga: Convert reset manager from struct to defines   Marek Vasut
• [U-Boot] [PATCH v5 1/4] arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes   Marek Vasut
• [U-Boot] [PATCH V2 2/3] watchdog: designware: Convert to DM and DT probing   Marek Vasut
• [U-Boot] [PATCH V2 1/3] watchdog: designware: Migrate CONFIG_DESIGNWARE_WATCHDOG to Kconfig   Marek Vasut
• [U-Boot] [PATCH V2 2/3] watchdog: designware: Convert to DM and DT probing   Marek Vasut
• [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert   Marek Vasut
• [U-Boot] [PATCH] usb: xhci: support 1.1 or later version   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] arm: dts: Stratix10: Fix memory node address and size cells   Marek Vasut
• [U-Boot] [PATCH] configs: Stratix10: Disable CONFIG_SPL_USE_TINY_PRINTF   Marek Vasut
• [U-Boot] [RESEND PATCH 3/5] usb: host: dwc2: force reset assert   Marek Vasut
• [U-Boot] [RESEND PATCH 1/5] usb: host: dwc2: add phy support   Marek Vasut
• [U-Boot] [PATCH v2 0/4] usb: host: dwc2: use driver model for PHY and CLOCK   Marek Vasut
• [U-Boot] [PATCH 1/9] mmc: tmio: sdhi: Track current tap number in private data   Marek Vasut
• [U-Boot] [PATCH 2/9] mmc: tmio: sdhi: Track SMPCMP valu in private data   Marek Vasut
• [U-Boot] [PATCH 3/9] mmc: tmio: sdhi: Use 4 tuning taps on M3W up to ES1.2   Marek Vasut
• [U-Boot] [PATCH 4/9] mmc: tmio: sdhi: Adjust DT2FF settings for HS400 mode   Marek Vasut
• [U-Boot] [PATCH 5/9] mmc: tmio: sdhi: Adjust HS400 calibration offsets   Marek Vasut
• [U-Boot] [PATCH 6/9] mmc: tmio: sdhi: Disable auto-retuning in HS400   Marek Vasut
• [U-Boot] [PATCH 7/9] mmc: tmio: sdhi: Add SCC error checking   Marek Vasut
• [U-Boot] [PATCH 8/9] mmc: tmio: sdhi: Skip bad taps   Marek Vasut
• [U-Boot] [PATCH 9/9] mmc: tmio: sdhi: Add calibration tables   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: add ehci max xfer size ehci config entry   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH v1] arm: socfpga: Enable Stratix10 SMMU access   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Temporarily disable PCI dma-ranges update   Marek Vasut
• [U-Boot] [PATCH v1] arm: socfpga: Enable Stratix10 SMMU access   Marek Vasut
• [U-Boot] [PATCH 1/4] usb: cdns3: Fix include file path   Marek Vasut
• [U-Boot] [PATCH v1] arm: socfpga: Enable Stratix10 SMMU access   Marek Vasut
• [U-Boot] [PATCH v2 07/10] usb: dwc3: Add phy interface for dwc3_uboot   Marek Vasut
• [U-Boot] [PATCH 1/4] usb: cdns3: Fix include file path   Marek Vasut
• [U-Boot] [PATCH v6 17/19] arm: dts: agilex: Add base dtsi and devkit dts   Marek Vasut
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Marek Vasut
• [U-Boot] [PATCH v3] spi: cadence_qspi: support DM_CLK   Marek Vasut
• [U-Boot] [RESEND PATCH v3] spi: cadence_qspi: support DM_CLK   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: socfpga: Actually put bridges into reset on Gen5 in bridge disable   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: socfpga: Purge pending transactions upon enabling bridges on Gen5   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix default mtdparts   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Unreset NAND in SPL on Gen5   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Introduce u-boot-with-nand-spl.sfp target   Marek Vasut
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Marek Vasut
• [U-Boot] [PATCH 2/3] mtd: rawnand: denali: Allow operation without clock driver   Marek Vasut
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH] ddr: altera: Add DDR2 support to Gen5 driver   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Add ArriaV ST/SX ID   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix default mtdparts   Marek Vasut
• [U-Boot] [BUG] usb: drivers/usb/gadget/composite.c fails to build   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Unreset NAND in SPL on Gen5   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: socfpga: Purge pending transactions upon enabling bridges on Gen5   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Introduce u-boot-with-nand-spl.sfp target   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Unreset NAND in SPL on Gen5   Marek Vasut
• [U-Boot] [PATCH] arm: dts: Stratix10: change pad skew values for EMAC0 PHY driver   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: stratix10: Add alias for gmac0 in S10 dts   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: composite: fix possible alignment issues   Marek Vasut
• [U-Boot] Maximum size of u-boot.imx for TBS2910 board   Marek Vasut
• [U-Boot] [PATCH 2/2] drivers: usb: host: Add BRCM xHCI driver   Marek Vasut
• [U-Boot] [PATCH V2 1/9] mmc: tmio: sdhi: Track current tap number in private data   Marek Vasut
• [U-Boot] [PATCH V2 2/9] mmc: tmio: sdhi: Track SMPCMP valu in private data   Marek Vasut
• [U-Boot] [PATCH V2 3/9] mmc: tmio: sdhi: Use 4 tuning taps on M3W up to ES1.2   Marek Vasut
• [U-Boot] [PATCH V2 4/9] mmc: tmio: sdhi: Adjust DT2FF settings for HS400 mode   Marek Vasut
• [U-Boot] [PATCH V2 5/9] mmc: tmio: sdhi: Adjust HS400 calibration offsets   Marek Vasut
• [U-Boot] [PATCH V2 6/9] mmc: tmio: sdhi: Disable auto-retuning in HS400   Marek Vasut
• [U-Boot] [PATCH V2 7/9] mmc: tmio: sdhi: Add SCC error checking   Marek Vasut
• [U-Boot] [PATCH V2 8/9] mmc: tmio: sdhi: Skip bad taps   Marek Vasut
• [U-Boot] [PATCH V2 9/9] mmc: tmio: sdhi: Add calibration tables   Marek Vasut
• [U-Boot] [PATCH 9/9] mmc: tmio: sdhi: Add calibration tables   Marek Vasut
• [U-Boot] [PATCH v4 0/7] usb: kbd: implement special keys   Marek Vasut
• [U-Boot] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Marek Vasut
• [U-Boot] [PATCH 2/3] mtd: rawnand: denali: Allow operation without clock driver   Marek Vasut
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Marek Vasut
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH] pci: imx: Add iMX6SX compatible   Marek Vasut
• [U-Boot] [PATCH 1/4] ARM: mx6: ddr: Make debug prints work with tiny printf   Marek Vasut
• [U-Boot] [PATCH 2/4] ARM: mx6: ddr: Factor out SDQS configuration code   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: mx6: ddr: Configure all SDQS pullups using loop   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: mx6: ddr: Add support for iMX6SX   Marek Vasut
• [U-Boot] [PATCH] ARM: mx6: pmu: Expose PMU LDO configuration interface   Marek Vasut
• [U-Boot] [PATCH 1/6] ARM: imx: vining2000: Convert to SPL framework   Marek Vasut
• [U-Boot] [PATCH 2/6] ARM: imx: vining2000: Enable DDR DRAM calibration   Marek Vasut
• [U-Boot] [PATCH 3/6] ARM: imx: vining2000: Convert to ethernet DM   Marek Vasut
• [U-Boot] [PATCH 4/6] ARM: imx: vining2000: Enable fitImage support   Marek Vasut
• [U-Boot] [PATCH 5/6] ARM: imx: vining2000: Repair PCIe support   Marek Vasut
• [U-Boot] [PATCH 6/6] ARM: imx: vining2000: Align SOC and ARM LDO voltages   Marek Vasut
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Marek Vasut
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Marek Vasut
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Marek Vasut
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Marek Vasut
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Marek Vasut
• [U-Boot] [PATCH v2 2/2] drivers: usb: host: Add BRCM xHCI driver   Marek Vasut
• [U-Boot] [PATCH v3 2/2] drivers: usb: host: Add BRCM xHCI driver   Marek Vasut
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Marek Vasut
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Marek Vasut
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Marek Vasut
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Marek Vasut
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Marek Vasut
• [U-Boot] [RFC PATCH] ARM: reset: Move SYSRESET condition from Makefile into source file   Marek Vasut
• [U-Boot] [PATCH] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   Marek Vasut
• [U-Boot] [U-Boot-Custodians] [U-Boot-Board-Maintainers] [RFC] Eliminate boards not using CONFIG_DM=y   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH 1/4] ARM: dts: dh-imx6: add wdt-reboot node for sysreset driver   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (29.11.2019)   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: rmobile: Convert H2 Lager to DM_SPI{, _FLASH}   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: rmobile: Convert M2W Koelsch to DM_SPI{, _FLASH}   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: rmobile: Convert M2N Gose to DM_SPI{, _FLASH}   Marek Vasut
• [U-Boot] [PATCH 0/3] arm: dts: ti: sync cpsw/mdio/phy with latest linux 1 - drop phy_id   Lokesh Vutla
• [U-Boot] [PATCH v2 0/6] net: ti: set of fixes and improvements   Lokesh Vutla
• [U-Boot] [PATCH v2 0/6] net: ti: set of fixes and improvements   Lokesh Vutla
• [U-Boot] [PATCH] configs: j721e_evm_r5_defconfig: Remove SPL multi-DTB FIT support   Lokesh Vutla
• [U-Boot] [PATCH 05/11] dma: ti: k3-udma: Get SYSFW reference from DT phandle   Lokesh Vutla
• [U-Boot] [PATCH 1/3] tools: dumpimage: Provide more feedback on internal errors   Lokesh Vutla
• [U-Boot] [PATCH 2/3] tools: fit_image: Use fit_image_get_data_and_size for getting offset/size   Lokesh Vutla
• [U-Boot] [PATCH 3/3] tools: dumpimage: Fall-though to print usage for help command   Lokesh Vutla
• [U-Boot] [PATCH] spl: ymodem: Fix loading of fit image   Lokesh Vutla
• [U-Boot] [PATCH] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig   Lokesh Vutla
• [U-Boot] [PATCH 2/5] board: ti: beagleboneai: add initial support   Lokesh Vutla
• [U-Boot] [PATCH 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Lokesh Vutla
• [U-Boot] [PATCH v2] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig   Lokesh Vutla
• [U-Boot] [PATCH 0/6] J721e HS device support   Lokesh Vutla
• [U-Boot] [PATCH] board: ti: dra7-evm: remove net platform code   Lokesh Vutla
• [U-Boot] [PATCH] board: ti: am43xx: remove net platform code   Lokesh Vutla
• [U-Boot] [PATCH v2 1/6] remoteproc: elf_loader: Add elf resource table load support   Lokesh Vutla
• [U-Boot] [PATCH v2 1/5] board: ti: beagleboneai: emmc read changes   Lokesh Vutla
• [U-Boot] [PATCH v2 2/5] board: ti: beagleboneai: add initial support   Lokesh Vutla
• [U-Boot] [PATCH v2 3/5] board: ti: beagleboneai: IODELAY and pinmux changes   Lokesh Vutla
• [U-Boot] [PATCH v2 4/5] board: ti: beagleboneai: add dts file   Lokesh Vutla
• [U-Boot] [PATCH v2 5/5] board: ti: beagleboneai: enable in am57xx_evm_defconfig   Lokesh Vutla
• [U-Boot] Pull request: u-boot-net.git master   Michael Walle
• [U-Boot] [PATCH v2 1/2] spi: nxp_fspi: new driver for the FlexSPI controller   Michael Walle
• [U-Boot] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver   Michael Walle
• [U-Boot] Pull request: u-boot-net.git master   Michael Walle
• [U-Boot] [EXT] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver   Michael Walle
• [U-Boot] [EXT] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver   Michael Walle
• [U-Boot] [PATCH] armv8: fsl-layerscape: fix hwconfig and prefetching   Michael Walle
• [U-Boot] [PATCH v3 1/3] spi: nxp_fspi: new driver for the FlexSPI controller   Michael Walle
• [U-Boot] [PATCH v3 2/3] arm: ls1028a: use the new flexspi driver   Michael Walle
• [U-Boot] [PATCH v3 3/3] arm: dts: ls1028a: fix interrupt properties   Michael Walle
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: fix warning if no hwconfig is defined   Michael Walle
• [U-Boot] [PATCH] armv8: layerscape: set HWCONFIG_BUFFER_SIZE   Michael Walle
• [U-Boot] [PATCH v4 0/5] Add helper function for linking a DM Eth device to a PHY   Michael Walle
• [U-Boot] [PATCH v3 1/3] spi: nxp_fspi: new driver for the FlexSPI controller   Michael Walle
• [U-Boot] [PATCH v4 0/5] Add helper function for linking a DM Eth device to a PHY   Michael Walle
• [U-Boot] [PATCH 4/6] drivers: net: add Felix DSA switch driver   Michael Walle
• [U-Boot] [PATCH 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies   Michael Walle
• [U-Boot] [PATCH 0/6] Introduce DSA Ethernet switch class and Felix driver   Michael Walle
• [U-Boot] [PATCH 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies   Michael Walle
• [U-Boot] [PATCH] armv8: layerscape: fix SPL multi DTB loading   Michael Walle
• [U-Boot] [PATCH] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT   Michael Walle
• [U-Boot] [PATCH v2] ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT   Michael Walle
• [U-Boot] [PATCH v2 1/2] spi: nxp_fspi: new driver for the FlexSPI controller   Michael Walle
• [U-Boot] Should UEFI be disabled on ARM11 boards by default?   Linus Walleij
• [U-Boot] [PATCH 1/1] arm: fix -march for ARM11   Linus Walleij
• [U-Boot] [PATCH 1/1] arm: fix -march for ARM11   Linus Walleij
• [U-Boot] [PATCH 1/1] efi_loader: default EFI_LOADER=n on ARM11   Linus Walleij
• [U-Boot] [PATCH v4] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [PATCH v4] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [PATCH v4] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [PATCH v5] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [PATCH 26/34] binman: Correct symbol calculation with non-zero image base   Stephen Warren
• [U-Boot] [PATCH] Revert "binman: Correct symbol calculation with non-zero image base"   Stephen Warren
• [U-Boot] [PATCH] binman: tegra: Adjust symbol calculation depending on end-at-4gb   Stephen Warren
• [U-Boot] [PATCH] Revert "binman: Correct symbol calculation with non-zero image base"   Stephen Warren
• [U-Boot] [PATCH] binman: tegra: Adjust symbol calculation depending on end-at-4gb   Stephen Warren
• [U-Boot] [PATCH] binman: tegra: Adjust symbol calculation depending on end-at-4gb   Stephen Warren
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Qu Wenruo
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE   Jens Wiklander
• [U-Boot] [PATCH 12/16] cmd: env: use appropriate guid for authenticated UEFI variable   Patrick Wildt
• [U-Boot] imx8m: fix rom version check to unbreak some B0 chips   Patrick Wildt
• [U-Boot] imx8mq-evk boot regression   Patrick Wildt
• [U-Boot] imx8mq-evk boot regression   Patrick Wildt
• [U-Boot] [PATCH v2 2/2] rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb   Patrick Wildt
• [U-Boot] [EXT] Re: [RFC PATCH 00/29] arm: Introduce Marvell/Cavium OcteonTX   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: Cavium/Marvell Octeon Support   Aaron Williams
• [U-Boot] [EXT] Re: [RFC PATCH 13/29] arch: include: octeontx: add headers for OcteonTX   Aaron Williams
• [U-Boot] [PATCH] spi: prevent overriding established bus settings   Marcin Wojtas
• [U-Boot] [PATCH] spi: prevent overriding established bus settings   Marcin Wojtas
• [U-Boot] [PATCH] cmd: pxe: Increase maximum path length   Ben Wolsieffer
• [U-Boot] [PATCH] pwm: rk_pwm: Make PWM driver to support all Rockchip Socs   David Wu
• [U-Boot] [PATCH 1/2] arm: rockchip: rk3308: Initialize the iomux configuration   David Wu
• [U-Boot] [PATCH 2/2] pinctrl: rockchip: Add pinctrl support for rk3308   David Wu
• [U-Boot] [PATCH 1/3] net: gmac_rockchip: Add support for rk3308   David Wu
• [U-Boot] [PATCH 2/3] arm: dts: Add mac node for rk3308 at dtsi level   David Wu
• [U-Boot] [PATCH 3/3] dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CC   David Wu
• [U-Boot] [PATCH] poweroff: add poweroff for mt6323 pmic   Frank Wunderlich
• [U-Boot] [PATCH] poweroff: add poweroff for mt6323 pmic   Frank Wunderlich
• [U-Boot] [PATCH 3/4] mtd: denali: Drop custom dma mapping functions   Masahiro Yamada
• [U-Boot] [PATCH 2/4] mmc: tmio-common: Drop custom dma mapping functions   Masahiro Yamada
• [U-Boot] [PATCH 1/4] asm: dma-mapping.h: Fix dma mapping functions   Masahiro Yamada
• [U-Boot] [PATCH] binman: README: fix default filename of u-boot-with-ucode-ptr   Masahiro Yamada
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Masahiro Yamada
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Masahiro Yamada
• [U-Boot] [PATCH 2/3] mtd: rawnand: denali: Allow operation without clock driver   Masahiro Yamada
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Masahiro Yamada
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Masahiro Yamada
• [U-Boot] [PATCH 3/3] mtd: rawnand: denali: Do not reset the block on SoCFPGA   Masahiro Yamada
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Masahiro Yamada
• [U-Boot] [PATCH 1/3] mtd: rawnand: denali-spl: Add missing hardware init   Masahiro Yamada
• [U-Boot] [PATCH v3 0/9] Add support for RK3308 SOC   Andy Yan
• [U-Boot] [PATCH v3 1/9] arm: rockchip: Add RK3308 SOC support   Andy Yan
• [U-Boot] [PATCH v3 2/9] rockchip: clk: Add clk driver for rk3308   Andy Yan
• [U-Boot] [PATCH v3 3/9] arm: dts: rockchip: Add dts for rk3308 evb   Andy Yan
• [U-Boot] [PATCH v3 4/9] board: rockchip: Add rk3308 evb support   Andy Yan
• [U-Boot] [PATCH v3 5/9] rockchip: rk3308: Add sdram driver   Andy Yan
• [U-Boot] [PATCH v3 6/9] rockchip: mkimage: add support for RK3308   Andy Yan
• [U-Boot] [PATCH v3 7/9] rockchip: rk3308: Add dts for ROC-RK3308-CC   Andy Yan
• [U-Boot] [PATCH v3 8/9] rockchip: rk3308: Add support for ROC-RK3308-CC board   Andy Yan
• [U-Boot] [PATCH v3 9/9] doc: rockchip: Add documentation for rk3308 based boards   Andy Yan
• [U-Boot] [PATCH 1/4] doc: rockchip: Update build instruction for rk3308   Andy Yan
• [U-Boot] [PATCH 2/4] rockchip: rk3308: enable spl-fifo-mode for emmc   Andy Yan
• [U-Boot] [PATCH 3/4] rockchip: px5: enable spl-fifo-mode for emmc for px5-evb   Andy Yan
• [U-Boot] [PATCH 4/4] rockchip: evb-px5: disable NET   Andy Yan
• [U-Boot] [PATCH 1/2] rockchip: clk: rv1108: remove duplicate reset init   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: clk: fix wrong CONFIG_IS_ENABLED handling   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399: rock960: Update config for TPL   Kever Yang
• [U-Boot] [PATCH v2 1/9] arm: rockchip: Add RK3308 SOC support   Kever Yang
• [U-Boot] [PATCH v2 2/9] rockchip: clk: Add clk driver for rk3308   Kever Yang
• [U-Boot] [PATCH v2 3/9] arm: dts: rockchip: Add dts for rk3308 evb   Kever Yang
• [U-Boot] [PATCH v2 4/9] board: rockchip: Add rk3308 evb support   Kever Yang
• [U-Boot] [PATCH v2 5/9] rockchip: rk3308: Add sdram driver   Kever Yang
• [U-Boot] [PATCH v2 6/9] rockchip: mkimage: add support for RK3308   Kever Yang
• [U-Boot] [PATCH v2 8/9] rockchip: rk3308: Add support for ROC-RK3308-CC board   Kever Yang
• [U-Boot] [PATCH v2 7/9] rockchip: rk3308: Add dts for ROC-RK3308-CC   Kever Yang
• [U-Boot] [PATCH v2 9/9] doc: rockchip: Add documentation for rk3308 based boards   Kever Yang
• [U-Boot] [PATCH] arm: dts: rk3399-roc-pc: Sync latest dts changes from Linux   Kever Yang
• [U-Boot] Pull request: u-boot-rockchip-20191026   Kever Yang
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel   Kever Yang
• [U-Boot] [PATCH 2/2] arm: dts: rk3399-rockpro64: slightly increase center voltage   Kever Yang
• [U-Boot] [PATCH 11/12] rockchip: add px30 architecture core   Kever Yang
• [U-Boot] [PATCH v3 1/5] Makefile: Add rockchip image type   Kever Yang
• [U-Boot] [PATCH v4 1/7] Makefile: Add rockchip image type   Kever Yang
• [U-Boot] [PATCH v4 2/7] Makefile: rockchip: Suffix platform type with tpl name   Kever Yang
• [U-Boot] [PATCH v4 3/7] Makefile: rockchip: Support SPL-alone mkimage   Kever Yang
• [U-Boot] [PATCH v4 5/7] arm: dts: rk3036: Add rk3036-u-boot.dtsi   Kever Yang
• [U-Boot] [PATCH v4 6/7] rockchip: Add Single boot image (with binman, pad_cat)   Kever Yang
• [U-Boot] [PATCH v4 7/7] doc: boards: Add rockchip documentation   Kever Yang
• [U-Boot] [PATCH v1] rockchip: clk: pll: add common pll setting funcs   Kever Yang
• [U-Boot] [PATCH V2] rockchip: dts: tinker: Add tinker-s board support   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsi   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: dts: tinker: Add tinker-s board support   Kever Yang
• [U-Boot] [PATCH] rockchip: Fix spl boot order path of booting device   Kever Yang
• [U-Boot] [PATCH v2] rockchip: rk3399: split rockpro64 out of evb_rk3399   Kever Yang
• [U-Boot] Pull request: u-boot-rockchip-20191026   Kever Yang
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Kever Yang
• [U-Boot] [RFC PATCH] rockchip: tinker: Add boot from capability   Kever Yang
• [U-Boot] [PATCH 1/4] arm64: dts: rk3399-rock960: add vdd_log and its init value   Kever Yang
• [U-Boot] [PATCH 2/4] rockchip: rk3399: rock-pi4: Add init value for vdd_log   Kever Yang
• [U-Boot] [PATCH 3/4] rockchip: rk3399: khadas-edge: Add init value for vdd_log   Kever Yang
• [U-Boot] [PATCH 4/4] rockchip: rk3399: orangepi: Add init value for vdd_log   Kever Yang
• [U-Boot] [PATCH v2 1/2] rockchip: clk: rv1108: remove duplicate reset init   Kever Yang
• [U-Boot] [PATCH] configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3288: Fix dwc2 gadget registration   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: imply instead of selecting SPL_SYS_MALLOC_SIMPLE   Kever Yang
• [U-Boot] [PATCH v3 7/9] rockchip: rk3308: Add dts for ROC-RK3308-CC   Kever Yang
• [U-Boot] [PATCH v3 8/9] rockchip: rk3308: Add support for ROC-RK3308-CC board   Kever Yang
• [U-Boot] [PATCH v3 9/9] doc: rockchip: Add documentation for rk3308 based boards   Kever Yang
• [U-Boot] [PATCH] rockchip: Fix spl boot order path of booting device   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: allow DRAM init in SPL and fix ordering   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: Convert to use FIT generator for optee   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: lion-rk3368: Migrate to use common FIT generator   Kever Yang
• [U-Boot] [PATCH 3/3] Kconfig: Enable building of u-boot.itb on Rockchip platform   Kever Yang
• [U-Boot] [PATCH v3 00/22] rockchip: ram: add common code for sdram driver   Kever Yang
• [U-Boot] [PATCH v3 01/22] ram: rockchip: rename sdram.h to sdram_rk3288.h   Kever Yang
• [U-Boot] [PATCH v3 02/22] ram: rockchip: rename sdram_common.c/h to sdram.c   Kever Yang
• [U-Boot] [PATCH v3 03/22] rockchip: sdram: move cap structure and debug function to sdram_common.h   Kever Yang
• [U-Boot] [PATCH v3 04/22] rockchip: sdram: extend to use sys_reg3 for capacity info   Kever Yang
• [U-Boot] [PATCH v3 05/22] rockchip: sdram: update the sys_reg to sys_reg2   Kever Yang
• [U-Boot] [PATCH v3 06/22] ram: rockchip: add common code for sdram driver   Kever Yang
• [U-Boot] [PATCH v3 07/22] ram: rockchip: move sdram_debug function into sdram_common   Kever Yang
• [U-Boot] [PATCH v3 08/22] ram: rockchip: Default enable DRAM debug info   Kever Yang
• [U-Boot] [PATCH v3 09/22] ram: rockchip: add controller code for PX30   Kever Yang
• [U-Boot] [PATCH v3 10/22] ram: rockchip: add phy driver code for PX30   Kever Yang
• [U-Boot] [PATCH v3 11/22] ram: rockchip: add common msch reg definition   Kever Yang
• [U-Boot] [PATCH v3 12/22] ram: px30: add sdram driver   Kever Yang
• [U-Boot] [PATCH v3 13/22] ram: rk3328: use common sdram driver   Kever Yang
• [U-Boot] [PATCH v3 14/22] ram: rk3399: migrate to use common code   Kever Yang
• [U-Boot] [PATCH v3 15/22] ram: rk3399: Clean up code   Kever Yang
• [U-Boot] [PATCH v3 16/22] ram: rk3399: fix error about get_ddrc0_con reg addr   Kever Yang
• [U-Boot] [PATCH v3 17/22] ram: rk3399: update the function of sdram_init   Kever Yang
• [U-Boot] [PATCH v3 18/22] ram: rk3399: add support detect capacity   Kever Yang
• [U-Boot] [PATCH v3 19/22] ram: rockchip: update lpddr4 timing for rk3399   Kever Yang
• [U-Boot] [PATCH v3 20/22] ram: rk3399: Sync the io setting from Rockchip vendor code   Kever Yang
• [U-Boot] [PATCH v3 21/22] ram: rk3399: update calculate_stride   Kever Yang
• [U-Boot] [PATCH v3 22/22] ram: rk3399: Fix dram setting to make dram more stable   Kever Yang
• [U-Boot] [PATCH v3 2/5] Makefile: Rename idbloader.img with u-boot-spl-rockchip.bin   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: dts: tinker: Add tinker-s board support   Kever Yang
• [U-Boot] [PATCH 1/4] arm64: dts: rk3399-rock960: add vdd_log and its init value   Kever Yang
• [U-Boot] [PATCH v2 1/3] rockchip: fix ordering of DRAM init   Kever Yang
• [U-Boot] [PATCH v2 2/3] rockchip: allow DRAM init in SPL   Kever Yang
• [U-Boot] [PATCH v2 3/3] rockchip: imply instead of selecting SPL_SYS_MALLOC_SIMPLE   Kever Yang
• [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support   Kever Yang
• [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section   Kever Yang
• [U-Boot] Pull request: u-boot-rockchip-20191026   Kever Yang
• [U-Boot] RK3399 boards (rockpi4 and rockpro64) kernel SError using upstream U-boot   Kever Yang
• [U-Boot] [PATCH 0/6] Add support for RK3308 SOC   Kever Yang
• [U-Boot] [PATCH] arm: dts: rk3399-roc-pc: Sync latest dts changes from Linux【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v2 0/9] Add support for RK3308 SOC   Kever Yang
• [U-Boot] [PATCH 2/2] arm: dts: rk3399-rockpro64: slightly increase center voltage【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v1] rockchip: clk: pll: add common pll setting funcs【请注意，邮件由u-boot-bounces at lists.denx.de代发】 funcs   Kever Yang
• [U-Boot] [PATCH 00/12] rockchip: add support for px30   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsi【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v2 1/2] rockchip: clk: rv1108: remove duplicate reset init【请注意，邮件由u-boot-bounces at lists.denx.de代发】 reset init   Kever Yang
• [U-Boot] [PATCH v2 2/2] rockchip: clk: fix wrong CONFIG_IS_ENABLED handling   Kever Yang
• [U-Boot] [PATCH] configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [U-Boot] rockchip: rk3399: TPL: rockpro64: Wrong memory size detected【请注意，邮件由lists.intricate at gmail.com代发】   Kever Yang
• [U-Boot] [PATCH v3 00/22] rockchip: ram: add common code for sdram driver【请注意，邮件由kever.yang at gmail.com代发】   Kever Yang
• [U-Boot] [PATCH V4 2/2] rockchip: dts: tinker: Add tinker-s board support【请注意，邮件由u-boot-bounces at lists.denx.de代发】 board support   Kever Yang
• [U-Boot] [PATCH V4 1/2] rockchip: dts: tinker: Move u-boot dmc initialization to specific section【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [RFC PATCH] rockchip: tinker: Add automatic board discovery   Kever Yang
• [U-Boot] [PATCH] power: fan53555: fix fan53555_regulator_set_value   Kever Yang
• [U-Boot] [PATCH] power: fan53555: add support for Silergy SYR82X and SYR83X   Kever Yang
• [U-Boot] [PATCH] rockchip: i2c: don't sent stop bit after each message【请注意，邮件由u-boot-bounces at lists.denx.de代发】 message   Kever Yang
• [U-Boot] [PATCH v2 1/2] rockchip: dwmmc: add handling for u-boot, spl-fifo-mode   Kever Yang
• [U-Boot] [PATCH v2 2/2] rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb   Kever Yang
• [U-Boot] [PATCH v2] travis: move orangepi to vendor job【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v2 01/10] gadget: Select USB_GADGET_MANUFACTURER for rockchip   Kever Yang
• [U-Boot] [PATCH v2 02/10] gadget: Select USB_GADGET_VENDOR_NUM for rockchip   Kever Yang
• [U-Boot] [PATCH v2 03/10] gadget: rockchip: USB_GADGET_PRODUCT_NUM   Kever Yang
• [U-Boot] [PATCH v2 04/10] gadget: rockchip: Add rk3128 USB_GADGET_PRODUCT_NUM   Kever Yang
• [U-Boot] [PATCH v2 05/10] fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV]   Kever Yang
• [U-Boot] [PATCH v2 06/10] fastboot: rockchip: Fix rk3328 default mmc device   Kever Yang
• [U-Boot] [PATCH v2 07/10] usb: dwc3: Add phy interface for dwc3_uboot   Kever Yang
• [U-Boot] [PATCH v2 08/10] gadget: rockchip: Add rk3399 USB_GADGET_PRODUCT_NUM   Kever Yang
• [U-Boot] [PATCH v2 09/10] rockchip: Setup dwc3_device (for non-dm gadgets)   Kever Yang
• [U-Boot] [PATCH v2 10/10] rock960: Enable USB Gadget   Kever Yang
• [U-Boot] [PATCH v2 09/10] rockchip: Setup dwc3_device (for non-dm gadgets)   Kever Yang
• [U-Boot] Pull request: u-boot-rockchip-20191124   Kever Yang
• [U-Boot] [U-boot] RK3399 + CortexM0   Kever Yang
• [U-Boot] [PATCH] pwm: rk_pwm: Make PWM driver to support all Rockchip Socs   Kever Yang
• [U-Boot] [PATCH 1/2] arm: rockchip: rk3308: Initialize the iomux configuration   Kever Yang
• [U-Boot] [PATCH 2/2] pinctrl: rockchip: Add pinctrl support for rk3308   Kever Yang
• [U-Boot] [PATCH 2/3] arm: dts: Add mac node for rk3308 at dtsi level   Kever Yang
• [U-Boot] [PATCH v4 1/2] disk: update to use SPL_PARTITIONS for SPL   Kever Yang
• [U-Boot] [PATCH v4 2/2] part: always enable part_get_info_ptr() for driver   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: px30: Fixup PMUGRF registers layout order   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: px30: Add support for using UART3 as debug UART   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: rk3399: fix force power on reset   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround   Kever Yang
• [U-Boot] [PATCH] usb: xhci: support 1.1 or later version   Chunfeng Yun
• [U-Boot] [RESEND PATCH] usb: xhci: support 1.1 or later version   Chunfeng Yun
• [U-Boot] [PATCH 1/7] clk: mediatek: mt7629: add support for ssusbsys   Chunfeng Yun
• [U-Boot] [PATCH 2/7] clk: fix error check for devm_clk_get_optional()   Chunfeng Yun
• [U-Boot] [PATCH 3/7] clk: check valid clock by clk_valid()   Chunfeng Yun
• [U-Boot] [PATCH 4/7] clk: add APIs to get (optional) clock by name without a device   Chunfeng Yun
• [U-Boot] [PATCH 5/7] clk: fixed_rate: add dummy enable() function   Chunfeng Yun
• [U-Boot] [PATCH 6/7] phy: phy-mtk-tphy: remove the check of -ENOSYS   Chunfeng Yun
• [U-Boot] [PATCH 7/7] phy: phy-mtk-tphy: make ref clock optional   Chunfeng Yun
• [U-Boot] [PATCH v1] configs: ls1028ardb: enable usb net r8152_eth   Yinbo Zhu
• [U-Boot] [PATCH v2] configs: ls1028ardb: enable usb net r8152_eth   Yinbo Zhu
• [U-Boot] [PATCH v1] configs: ls1028ardb: enable ugreen usb network card AX88179 and AX8817X drvier   Yinbo Zhu
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   jérémy alcim
• [U-Boot] [PATCH] configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig   djw at archiso.i-did-not-set--mail-host-address--so-tickle-me
• [U-Boot] [PATCH] gitattributes: dont treat non-text files as text   veeraiyan chidambaram
• [U-Boot] Question about U-Boot development model   deanzerder
• [U-Boot] [PATCH 08/10] power: pmic: Kconfig: add CONFIG_SPL_DM_PMIC_BD71837   sbabic at denx.de
• [U-Boot] [PATCH v2 3/3] video: mxsfb: set gd->fb_base   sbabic at denx.de
• [U-Boot] [PATCH v3 RESEND 1/2] ARM: imx: Fix bmode detection from grp10   sbabic at denx.de
• [U-Boot] [PATCH 06/10] arm: dts: imx8mm: sync dts from Linux Kernel   sbabic at denx.de
• [U-Boot] [PATCH v2 2/2] imx8: output SECO-FW and ATF commit IDs   sbabic at denx.de
• [U-Boot] [PATCH 3/3] imx8qxp: mek: add secure boot script   sbabic at denx.de
• [U-Boot] [PATCH 05/10] dt-bindings: import usb pd   sbabic at denx.de
• [U-Boot] [PATCH 03/10] imx: imx8mq: add init_nand_clk   sbabic at denx.de
• [U-Boot] [PATCH v3] i.MX6: nand: extend nandbcb command for imx6UL(L)   sbabic at denx.de
• [U-Boot] [PATCH v2 1/3] imx6ul: opos6ul: migrate to DM_ETH   sbabic at denx.de
• [U-Boot] [PATCH v2 3/5] spl: nor: Provide falcon boot support for NOR memories   sbabic at denx.de
• [U-Boot] [PATCH 07/10] pmic: bd71837: drop DEBUG macro   sbabic at denx.de
• [U-Boot] [PATCH 04/10] imx: spl: implement spl_boot_mode for i.MX7/8/8M   sbabic at denx.de
• [U-Boot] [PATCH v2 2/3] ARM: imx6: DHCOM i.MX6 PDK: spl: Add eMMC initialization to SPL code   sbabic at denx.de
• [U-Boot] [PATCH V2 5/6] net: fec_mxc: support i.MX8M with CLK_CCF   sbabic at denx.de
• [U-Boot] [PATCH v2 3/3] ARM: imx6: DHCOM i.MX6 PDK: defconfig: Enable MMC support of SPL   sbabic at denx.de
• [U-Boot] [PATCH 09/10] imx8m: evk: spl: probe clk in spl early stage   sbabic at denx.de
• [U-Boot] [PATCH 01/10] imx8m: imx8mq: get chip rev for B1 revision   sbabic at denx.de
• [U-Boot] [PATCH 2/3] imx8qm: mek: add secure boot script   sbabic at denx.de
• [U-Boot] [PATCH] imx: update i.MX8MQ device trees   sbabic at denx.de
• [U-Boot] [PATCH v2 4/5] ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB   sbabic at denx.de
• [U-Boot] [PATCH v2 5/5] mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPL   sbabic at denx.de
• [U-Boot] [PATCH] arm: mxs: Increase VDDD voltage to match specification   sbabic at denx.de
• [U-Boot] [PATCH v3 1/2] ARM: dts: imx6ull-colibri: change hierarchy of DTS files   sbabic at denx.de
• [U-Boot] [PATCH 1/2] watchdog: imx: Add DT ext-reset handling   sbabic at denx.de
• [U-Boot] [PATCH v3 RESEND 2/2] ARM: imx: Use IMX6_SRC_GPR10_BMODE instead of magic number   sbabic at denx.de
• [U-Boot] [PATCH v2 2/3] opos6uldev: migrate to DM_VIDEO   sbabic at denx.de
• [U-Boot] [PATCH v3 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes   sbabic at denx.de
• [U-Boot] [PATCH 10/10] imx8mm: evk: enable bd71837 pmic   sbabic at denx.de
• [U-Boot] [PATCH v5] imx: support i.MX8QM ROM 7720 a1 board   sbabic at denx.de
• [U-Boot] [PATCH V3 5/6] net: fec_mxc: support i.MX8M with CLK_CCF   sbabic at denx.de
• [U-Boot] [PATCH] imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board   sbabic at denx.de
• [U-Boot] [PATCH 02/10] imx8m: clock: improve irq response latency   sbabic at denx.de
• [U-Boot] [PATCH v2 1/5] ARM: imx: Covnert mccmon6 to use DM/DTS in the u-boot proper   sbabic at denx.de
• [U-Boot] [PATCH v1] imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5   sbabic at denx.de
• [U-Boot] [PATCH 1/3] imx8: Add AHAB secure boot support   sbabic at denx.de
• [U-Boot] [PATCH v2 1/3] ARM: imx6: DHCOM i.MX6 PDK: fix board_boot_modes emmc entry   sbabic at denx.de
• [U-Boot] [PATCH v2 2/5] ARM: imx: Decouple mccmon6's SPL and u-boot proper code   sbabic at denx.de
• [U-Boot] [PATCH v5 1/2] arm: dts: Add devicetree support for iMXQXP AI_ML board   sbabic at denx.de
• [U-Boot] [PATCH v2 1/2] mach-imx: Adding new argument for SIP call interface   sbabic at denx.de
• [U-Boot] [PATCH v3] board/BuR/brppt2: initial commit   sbabic at denx.de
• [U-Boot] [PATCH 2/2] watchdog: imx: Use immediate reset bits for expire_now   sbabic at denx.de
• [U-Boot] Raspberry Pi Compute Module 1 mini-UART   edrose
• [U-Boot] Raspberry Pi Compute Module 1 mini-UART   edrose
• [U-Boot] Raspberry Pi Compute Module 1 mini-UART   edrose
• [U-Boot] [PATCH v2 16/17] binman: Move to use Python 3   sjg at google.com
• [U-Boot] [PATCH v2 15/17] dtoc: Convert fdt.py to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 14/17] binman: Convert a few tests to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 13/17] binman: Remember the pre-reset entry size   sjg at google.com
• [U-Boot] [PATCH v2 12/17] pylibfdt: Correct the type for fdt_property_stub()   sjg at google.com
• [U-Boot] [PATCH v2 11/17] pylibfdt: Sync up with upstream   sjg at google.com
• [U-Boot] [PATCH v2 09/17] rkmux: Convert to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 10/17] pylibfdt: Convert to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 08/17] move_config: Convert to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 07/17] microcode_tool: Convert to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 06/17] test_dtoc: Move to use Python 3   sjg at google.com
• [U-Boot] [PATCH v2 05/17] test_fdt: Move to use Python 3   sjg at google.com
• [U-Boot] [PATCH v2 04/17] buildman: Convert to Python 3   sjg at google.com
• [U-Boot] [PATCH v2 03/17] patman: Move to use Python 3   sjg at google.com
• [U-Boot] [PATCH v2 01/17] patman: Adjust 'command' to return strings instead of bytes   sjg at google.com
• [U-Boot] [PATCH v2 02/17] patman: Use unicode for file I/O   sjg at google.com
• [U-Boot] [PATCH 4/4] fdt: Sync up to the latest libfdt   sjg at google.com
• [U-Boot] [PATCH 3/4] mx6: tbs2910: Minimise libfdt code size   sjg at google.com
• [U-Boot] [PATCH 2/4] fdt: Add Kconfig options to control code size   sjg at google.com
• [U-Boot] [PATCH 1/4] fdt: Add INT32_MAX to kernel.h for libfdt   sjg at google.com
• [U-Boot] [PATCH] patman: fix coverletter cc list with nulls   sjg at google.com
• [U-Boot] [PATCH] patman: fix some typos in comments   sjg at google.com
• [U-Boot] [PATCH 1/1] sandbox: use correct type reading /proc/self/maps   sjg at google.com
• [U-Boot] [PATCH] patman: fix coverletter cc list with nulls   sjg at google.com
• [U-Boot] [PATCH 1/1] sandbox: use correct type reading /proc/self/maps   sjg at google.com
• [U-Boot] [PATCH] patman: fix some typos in comments   sjg at google.com
• [U-Boot] [PATCH v3 4/4] tests: add OP-TEE test suite   sjg at google.com
• [U-Boot] [PATCH v3 2/4] fdtdec: only create phandle if caller wants it in fdtdec_add_reserved_memory()   sjg at google.com
• [U-Boot] [PATCH] patman: fix coverletter cc list with nulls   sjg at google.com
• [U-Boot] [PATCH 1/1] sandbox: use correct type reading /proc/self/maps   sjg at google.com
• [U-Boot] [PATCH] patman: fix some typos in comments   sjg at google.com
• [U-Boot] [PATCH v3 4/4] tests: add OP-TEE test suite   sjg at google.com
• [U-Boot] [PATCH v3 2/4] fdtdec: only create phandle if caller wants it in fdtdec_add_reserved_memory()   sjg at google.com
• [U-Boot] [PATCH v3 1/4] fdtdec: protect against another NULL phandlep in fdtdec_add_reserved_memory()   sjg at google.com
• [U-Boot] [PATCH 01/13] pinctrol: dm: remove the function pinctrl_decode_pin_config   sjg at google.com
• [U-Boot] [PATCH] The sata port can be configured when driver model enabled.   liu hao
• [U-Boot] Memory Tests in U-Boot   devendra.devadiga at iwavesystems.com
• [U-Boot] [PATCH v2 0/4] RPi one binary for RPi3/4 and RPi1/2   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 1/4] rpi: push fw_dtb_pointer in the .data section   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 2/4] ARM: bcm283x: Move BCM283x_BASE to a global variable   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 3/4] ARM: bcm283x: Set rpi_bcm283x_base at run-time   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 4/4] ARM: bcm283x: Set memory map at run-time   matthias.bgg at kernel.org
• [U-Boot] [PATCH] pinctrl: bcm283x: Add compatible for RPi4   matthias.bgg at kernel.org
• [U-Boot] [PATCH] ARM: defconfig: add unified config for RPi3 and RPi4   matthias.bgg at kernel.org
• [U-Boot] [PATCH] fdt: fix bcm283x dm-pre-reloc definitions   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 1/3] fdt: fix bcm283x dm-pre-reloc definitions   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2 3/3] drivers: bcm283x: Set pre-location flag for OF_BOARD   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 1/3] fdt: fix bcm283x dm-pre-reloc definitions   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 3/3] drivers: bcm283x: Set pre-location flag for OF_BOARD   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 1/3] fdt: fix bcm283x dm-pre-reloc definitions   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 2/3] arm: dts: bcm283x: Rename U-Boot file   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 3/3] drivers: bcm283x: Set pre-location flag for OF_BOARD   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 0/4] RPi one binary for RPi3/4 and RPi1/2   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 1/4] rpi: push fw_dtb_pointer in the .data section   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 2/4] ARM: bcm283x: Move BCM283x_BASE to a global variable   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 3/4] ARM: bcm283x: Set rpi_bcm283x_base at run-time   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 4/4] ARM: bcm283x: Set memory map at run-time   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 0/4] RPi one binary for RPi3/4 and RPi1/2   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 1/4] rpi: push fw_dtb_pointer in the .data section   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 2/4] ARM: bcm283x: Move BCM283x_BASE to a global variable   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 3/4] ARM: bcm283x: Set rpi_bcm283x_base at run-time   matthias.bgg at kernel.org
• [U-Boot] [PATCH v4 4/4] ARM: bcm283x: Set memory map at run-time   matthias.bgg at kernel.org
• [U-Boot] [PATCH v1] MAINTAINERS: Add info for bcm283x   matthias.bgg at kernel.org
• [U-Boot] [PATCH v3 0/5] Add support for MediaTek MT8518 Soc   mingming lee
• [U-Boot] [PATCH v3 1/5] ARM: MediaTek: Add support for MediaTek MT8518 SoC   mingming lee
• [U-Boot] [PATCH v3 2/5] clk: mediatek: add driver for MT8518   mingming lee
• [U-Boot] [PATCH v3 3/5] mmc: mtk-sd: Adjust the mmc tuning flow   mingming lee
• [U-Boot] [PATCH v3 4/5] pinctrl: add driver for MT8518   mingming lee
• [U-Boot] [PATCH v3 5/5] ARM: MediaTek: add basic support for MT8518 boards   mingming lee
• [U-Boot] [PATCH v1] arm: socfpga: Enable Stratix10 SMMU access   thor.thayer at linux.intel.com
• [U-Boot] [PATCH] gpio: at91_gpio: Add bank names   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] gpio: at91_gpio: Add bank names   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH v2] gpio: at91_gpio: Add bank names   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH v2] gpio: at91_gpio: Add bank names   Eugen.Hristev at microchip.com
• [U-Boot] [RFC PATCH] ARM: at91: Print CPU serial number in cpuinfo   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH v2 0/4] mtd: spi: spi-nor-core: Add SST vendor specific SFDP parser   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 1/4] mtd: spi: spi-nor-core: Add SST vendor specific SFDP parser   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 2/4] board: atmel: sama5d27_wlsom1_ek: Set ethaddr from spi-nor flash   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 3/4] configs: sama5d27_wlsom1_ek: qspiflash: Enable SPI NOR ethaddr retrieval   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 4/4] configs: sama5d27_wlsom1_ek: mmc: Enable SPI NOR ethaddr retrieval   Tudor.Ambarus at microchip.com
• [U-Boot] SPDX header might be wrong in 4 files from Android Open Source Project   zdenek.bouska at siemens.com
• [U-Boot] [PATCH 1/2] board: cm_fx6: Enable DM support for video, fix build error   sunil.m at techveda.org
• [U-Boot] [PATCH 2/2] board: cm_fx6: Enable CONFIG_DM_ETH   sunil.m at techveda.org
• [U-Boot] [RESEND PATCH] arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors   sunil.m at techveda.org