[U-Boot] [PATCH v3 2/6] cmd: Prepare sysboot command independence
Patrice Chotard
patrice.chotard at st.com
Mon Nov 25 08:07:37 UTC 2019
As sysboot and pxe commands are sharing piece of code, migrate this
common code into a new file pxe_utils.c to prepare sysboot command
code extraction from pxe.c
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
cmd/Makefile | 2 +-
cmd/pxe.c | 1478 +----------------------------------------------
cmd/pxe_utils.c | 1414 +++++++++++++++++++++++++++++++++++++++++++++
cmd/pxe_utils.h | 90 +++
4 files changed, 1507 insertions(+), 1477 deletions(-)
create mode 100644 cmd/pxe_utils.c
create mode 100644 cmd/pxe_utils.h
diff --git a/cmd/Makefile b/cmd/Makefile
index 2d723ea0f0..723b461e0d 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -108,7 +108,7 @@ ifdef CONFIG_PCI
obj-$(CONFIG_CMD_PCI) += pci.o
endif
obj-$(CONFIG_CMD_PINMUX) += pinmux.o
-obj-$(CONFIG_CMD_PXE) += pxe.o
+obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
obj-$(CONFIG_CMD_WOL) += wol.o
obj-$(CONFIG_CMD_QFW) += qfw.o
obj-$(CONFIG_CMD_READ) += read.o
diff --git a/cmd/pxe.c b/cmd/pxe.c
index 2665c4f88d..5fe7d45b3d 100644
--- a/cmd/pxe.c
+++ b/cmd/pxe.c
@@ -6,23 +6,11 @@
#include <common.h>
#include <command.h>
-#include <env.h>
-#include <malloc.h>
-#include <mapmem.h>
-#include <lcd.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <errno.h>
-#include <linux/list.h>
#include <fs.h>
-#include <splash.h>
-#include <asm/io.h>
-#include "menu.h"
-#include "cli.h"
-
-#define MAX_TFTP_PATH_LEN 127
+#include "pxe_utils.h"
+#ifdef CONFIG_CMD_NET
const char *pxe_default_paths[] = {
#ifdef CONFIG_SYS_SOC
#ifdef CONFIG_SYS_BOARD
@@ -35,85 +23,6 @@ const char *pxe_default_paths[] = {
NULL
};
-static bool is_pxe;
-
-#ifdef CONFIG_CMD_NET
-/*
- * Convert an ethaddr from the environment to the format used by pxelinux
- * filenames based on mac addresses. Convert's ':' to '-', and adds "01-" to
- * the beginning of the ethernet address to indicate a hardware type of
- * Ethernet. Also converts uppercase hex characters into lowercase, to match
- * pxelinux's behavior.
- *
- * Returns 1 for success, -ENOENT if 'ethaddr' is undefined in the
- * environment, or some other value < 0 on error.
- */
-static int format_mac_pxe(char *outbuf, size_t outbuf_len)
-{
- uchar ethaddr[6];
-
- if (outbuf_len < 21) {
- printf("outbuf is too small (%zd < 21)\n", outbuf_len);
-
- return -EINVAL;
- }
-
- if (!eth_env_get_enetaddr_by_index("eth", eth_get_dev_index(), ethaddr))
- return -ENOENT;
-
- sprintf(outbuf, "01-%02x-%02x-%02x-%02x-%02x-%02x",
- ethaddr[0], ethaddr[1], ethaddr[2],
- ethaddr[3], ethaddr[4], ethaddr[5]);
-
- return 1;
-}
-#endif
-
-/*
- * Returns the directory the file specified in the bootfile env variable is
- * in. If bootfile isn't defined in the environment, return NULL, which should
- * be interpreted as "don't prepend anything to paths".
- */
-static int get_bootfile_path(const char *file_path, char *bootfile_path,
- size_t bootfile_path_size)
-{
- char *bootfile, *last_slash;
- size_t path_len = 0;
-
- /* Only syslinux allows absolute paths */
- if (file_path[0] == '/' && !is_pxe)
- goto ret;
-
- bootfile = from_env("bootfile");
-
- if (!bootfile)
- goto ret;
-
- last_slash = strrchr(bootfile, '/');
-
- if (last_slash == NULL)
- goto ret;
-
- path_len = (last_slash - bootfile) + 1;
-
- if (bootfile_path_size < path_len) {
- printf("bootfile_path too small. (%zd < %zd)\n",
- bootfile_path_size, path_len);
-
- return -1;
- }
-
- strncpy(bootfile_path, bootfile, path_len);
-
- ret:
- bootfile_path[path_len] = '\0';
-
- return 1;
-}
-
-static int (*do_getfile)(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr);
-
-#ifdef CONFIG_CMD_NET
static int do_get_tftp(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr)
{
char *tftp_argv[] = {"tftp", NULL, NULL, NULL};
@@ -169,176 +78,8 @@ static int do_get_any(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr)
return -ENOENT;
}
-/*
- * As in pxelinux, paths to files referenced from files we retrieve are
- * relative to the location of bootfile. get_relfile takes such a path and
- * joins it with the bootfile path to get the full path to the target file. If
- * the bootfile path is NULL, we use file_path as is.
- *
- * Returns 1 for success, or < 0 on error.
- */
-static int get_relfile(cmd_tbl_t *cmdtp, const char *file_path,
- unsigned long file_addr)
-{
- size_t path_len;
- char relfile[MAX_TFTP_PATH_LEN+1];
- char addr_buf[18];
- int err;
-
- err = get_bootfile_path(file_path, relfile, sizeof(relfile));
-
- if (err < 0)
- return err;
-
- path_len = strlen(file_path);
- path_len += strlen(relfile);
-
- if (path_len > MAX_TFTP_PATH_LEN) {
- printf("Base path too long (%s%s)\n",
- relfile,
- file_path);
-
- return -ENAMETOOLONG;
- }
-
- strcat(relfile, file_path);
-
- printf("Retrieving file: %s\n", relfile);
-
- sprintf(addr_buf, "%lx", file_addr);
-
- return do_getfile(cmdtp, relfile, addr_buf);
-}
-
-/*
- * Retrieve the file at 'file_path' to the locate given by 'file_addr'. If
- * 'bootfile' was specified in the environment, the path to bootfile will be
- * prepended to 'file_path' and the resulting path will be used.
- *
- * Returns 1 on success, or < 0 for error.
- */
-static int get_pxe_file(cmd_tbl_t *cmdtp, const char *file_path,
- unsigned long file_addr)
-{
- unsigned long config_file_size;
- char *tftp_filesize;
- int err;
- char *buf;
-
- err = get_relfile(cmdtp, file_path, file_addr);
-
- if (err < 0)
- return err;
-
- /*
- * the file comes without a NUL byte at the end, so find out its size
- * and add the NUL byte.
- */
- tftp_filesize = from_env("filesize");
-
- if (!tftp_filesize)
- return -ENOENT;
-
- if (strict_strtoul(tftp_filesize, 16, &config_file_size) < 0)
- return -EINVAL;
-
- buf = map_sysmem(file_addr + config_file_size, 1);
- *buf = '\0';
- unmap_sysmem(buf);
-
- return 1;
-}
-
#ifdef CONFIG_CMD_NET
-#define PXELINUX_DIR "pxelinux.cfg/"
-
-/*
- * Retrieves a file in the 'pxelinux.cfg' folder. Since this uses get_pxe_file
- * to do the hard work, the location of the 'pxelinux.cfg' folder is generated
- * from the bootfile path, as described above.
- *
- * Returns 1 on success or < 0 on error.
- */
-static int get_pxelinux_path(cmd_tbl_t *cmdtp, const char *file,
- unsigned long pxefile_addr_r)
-{
- size_t base_len = strlen(PXELINUX_DIR);
- char path[MAX_TFTP_PATH_LEN+1];
-
- if (base_len + strlen(file) > MAX_TFTP_PATH_LEN) {
- printf("path (%s%s) too long, skipping\n",
- PXELINUX_DIR, file);
- return -ENAMETOOLONG;
- }
-
- sprintf(path, PXELINUX_DIR "%s", file);
-
- return get_pxe_file(cmdtp, path, pxefile_addr_r);
-}
-
-/*
- * Looks for a pxe file with a name based on the pxeuuid environment variable.
- *
- * Returns 1 on success or < 0 on error.
- */
-static int pxe_uuid_path(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r)
-{
- char *uuid_str;
-
- uuid_str = from_env("pxeuuid");
-
- if (!uuid_str)
- return -ENOENT;
-
- return get_pxelinux_path(cmdtp, uuid_str, pxefile_addr_r);
-}
-
-/*
- * Looks for a pxe file with a name based on the 'ethaddr' environment
- * variable.
- *
- * Returns 1 on success or < 0 on error.
- */
-static int pxe_mac_path(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r)
-{
- char mac_str[21];
- int err;
-
- err = format_mac_pxe(mac_str, sizeof(mac_str));
-
- if (err < 0)
- return err;
-
- return get_pxelinux_path(cmdtp, mac_str, pxefile_addr_r);
-}
-
-/*
- * Looks for pxe files with names based on our IP address. See pxelinux
- * documentation for details on what these file names look like. We match
- * that exactly.
- *
- * Returns 1 on success or < 0 on error.
- */
-static int pxe_ipaddr_paths(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r)
-{
- char ip_addr[9];
- int mask_pos, err;
-
- sprintf(ip_addr, "%08X", ntohl(net_ip.s_addr));
-
- for (mask_pos = 7; mask_pos >= 0; mask_pos--) {
- err = get_pxelinux_path(cmdtp, ip_addr, pxefile_addr_r);
-
- if (err > 0)
- return err;
-
- ip_addr[mask_pos] = '\0';
- }
-
- return -ENOENT;
-}
-
/*
* Entry point for the 'pxe get' command.
* This Follows pxelinux's rules to download a config file from a tftp server.
@@ -400,1222 +141,7 @@ do_pxe_get(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 1;
}
-#endif
-
-/*
- * Wrapper to make it easier to store the file at file_path in the location
- * specified by envaddr_name. file_path will be joined to the bootfile path,
- * if any is specified.
- *
- * Returns 1 on success or < 0 on error.
- */
-static int get_relfile_envaddr(cmd_tbl_t *cmdtp, const char *file_path, const char *envaddr_name)
-{
- unsigned long file_addr;
- char *envaddr;
-
- envaddr = from_env(envaddr_name);
-
- if (!envaddr)
- return -ENOENT;
-
- if (strict_strtoul(envaddr, 16, &file_addr) < 0)
- return -EINVAL;
-
- return get_relfile(cmdtp, file_path, file_addr);
-}
-
-/*
- * A note on the pxe file parser.
- *
- * We're parsing files that use syslinux grammar, which has a few quirks.
- * String literals must be recognized based on context - there is no
- * quoting or escaping support. There's also nothing to explicitly indicate
- * when a label section completes. We deal with that by ending a label
- * section whenever we see a line that doesn't include.
- *
- * As with the syslinux family, this same file format could be reused in the
- * future for non pxe purposes. The only action it takes during parsing that
- * would throw this off is handling of include files. It assumes we're using
- * pxe, and does a tftp download of a file listed as an include file in the
- * middle of the parsing operation. That could be handled by refactoring it to
- * take a 'include file getter' function.
- */
-
-/*
- * Describes a single label given in a pxe file.
- *
- * Create these with the 'label_create' function given below.
- *
- * name - the name of the menu as given on the 'menu label' line.
- * kernel - the path to the kernel file to use for this label.
- * append - kernel command line to use when booting this label
- * initrd - path to the initrd to use for this label.
- * attempted - 0 if we haven't tried to boot this label, 1 if we have.
- * localboot - 1 if this label specified 'localboot', 0 otherwise.
- * list - lets these form a list, which a pxe_menu struct will hold.
- */
-struct pxe_label {
- char num[4];
- char *name;
- char *menu;
- char *kernel;
- char *config;
- char *append;
- char *initrd;
- char *fdt;
- char *fdtdir;
- int ipappend;
- int attempted;
- int localboot;
- int localboot_val;
- struct list_head list;
-};
-
-/*
- * Describes a pxe menu as given via pxe files.
- *
- * title - the name of the menu as given by a 'menu title' line.
- * default_label - the name of the default label, if any.
- * bmp - the bmp file name which is displayed in background
- * timeout - time in tenths of a second to wait for a user key-press before
- * booting the default label.
- * prompt - if 0, don't prompt for a choice unless the timeout period is
- * interrupted. If 1, always prompt for a choice regardless of
- * timeout.
- * labels - a list of labels defined for the menu.
- */
-struct pxe_menu {
- char *title;
- char *default_label;
- char *bmp;
- int timeout;
- int prompt;
- struct list_head labels;
-};
-
-/*
- * Allocates memory for and initializes a pxe_label. This uses malloc, so the
- * result must be free()'d to reclaim the memory.
- *
- * Returns NULL if malloc fails.
- */
-static struct pxe_label *label_create(void)
-{
- struct pxe_label *label;
-
- label = malloc(sizeof(struct pxe_label));
-
- if (!label)
- return NULL;
-
- memset(label, 0, sizeof(struct pxe_label));
-
- return label;
-}
-
-/*
- * Free the memory used by a pxe_label, including that used by its name,
- * kernel, append and initrd members, if they're non NULL.
- *
- * So - be sure to only use dynamically allocated memory for the members of
- * the pxe_label struct, unless you want to clean it up first. These are
- * currently only created by the pxe file parsing code.
- */
-static void label_destroy(struct pxe_label *label)
-{
- if (label->name)
- free(label->name);
-
- if (label->kernel)
- free(label->kernel);
-
- if (label->config)
- free(label->config);
-
- if (label->append)
- free(label->append);
-
- if (label->initrd)
- free(label->initrd);
-
- if (label->fdt)
- free(label->fdt);
-
- if (label->fdtdir)
- free(label->fdtdir);
-
- free(label);
-}
-
-/*
- * Print a label and its string members if they're defined.
- *
- * This is passed as a callback to the menu code for displaying each
- * menu entry.
- */
-static void label_print(void *data)
-{
- struct pxe_label *label = data;
- const char *c = label->menu ? label->menu : label->name;
-
- printf("%s:\t%s\n", label->num, c);
-}
-
-/*
- * Boot a label that specified 'localboot'. This requires that the 'localcmd'
- * environment variable is defined. Its contents will be executed as U-Boot
- * command. If the label specified an 'append' line, its contents will be
- * used to overwrite the contents of the 'bootargs' environment variable prior
- * to running 'localcmd'.
- *
- * Returns 1 on success or < 0 on error.
- */
-static int label_localboot(struct pxe_label *label)
-{
- char *localcmd;
-
- localcmd = from_env("localcmd");
-
- if (!localcmd)
- return -ENOENT;
-
- if (label->append) {
- char bootargs[CONFIG_SYS_CBSIZE];
-
- cli_simple_process_macros(label->append, bootargs);
- env_set("bootargs", bootargs);
- }
-
- debug("running: %s\n", localcmd);
-
- return run_command_list(localcmd, strlen(localcmd), 0);
-}
-
-/*
- * Boot according to the contents of a pxe_label.
- *
- * If we can't boot for any reason, we return. A successful boot never
- * returns.
- *
- * The kernel will be stored in the location given by the 'kernel_addr_r'
- * environment variable.
- *
- * If the label specifies an initrd file, it will be stored in the location
- * given by the 'ramdisk_addr_r' environment variable.
- *
- * If the label specifies an 'append' line, its contents will overwrite that
- * of the 'bootargs' environment variable.
- */
-static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label)
-{
- char *bootm_argv[] = { "bootm", NULL, NULL, NULL, NULL };
- char initrd_str[28];
- char mac_str[29] = "";
- char ip_str[68] = "";
- char *fit_addr = NULL;
- int bootm_argc = 2;
- int len = 0;
- ulong kernel_addr;
- void *buf;
-
- label_print(label);
-
- label->attempted = 1;
-
- if (label->localboot) {
- if (label->localboot_val >= 0)
- label_localboot(label);
- return 0;
- }
-
- if (label->kernel == NULL) {
- printf("No kernel given, skipping %s\n",
- label->name);
- return 1;
- }
-
- if (label->initrd) {
- if (get_relfile_envaddr(cmdtp, label->initrd, "ramdisk_addr_r") < 0) {
- printf("Skipping %s for failure retrieving initrd\n",
- label->name);
- return 1;
- }
-
- bootm_argv[2] = initrd_str;
- strncpy(bootm_argv[2], env_get("ramdisk_addr_r"), 18);
- strcat(bootm_argv[2], ":");
- strncat(bootm_argv[2], env_get("filesize"), 9);
- }
-
- if (get_relfile_envaddr(cmdtp, label->kernel, "kernel_addr_r") < 0) {
- printf("Skipping %s for failure retrieving kernel\n",
- label->name);
- return 1;
- }
-
- if (label->ipappend & 0x1) {
- sprintf(ip_str, " ip=%s:%s:%s:%s",
- env_get("ipaddr"), env_get("serverip"),
- env_get("gatewayip"), env_get("netmask"));
- }
-
-#ifdef CONFIG_CMD_NET
- if (label->ipappend & 0x2) {
- int err;
- strcpy(mac_str, " BOOTIF=");
- err = format_mac_pxe(mac_str + 8, sizeof(mac_str) - 8);
- if (err < 0)
- mac_str[0] = '\0';
- }
-#endif
-
- if ((label->ipappend & 0x3) || label->append) {
- char bootargs[CONFIG_SYS_CBSIZE] = "";
- char finalbootargs[CONFIG_SYS_CBSIZE];
-
- if (strlen(label->append ?: "") +
- strlen(ip_str) + strlen(mac_str) + 1 > sizeof(bootargs)) {
- printf("bootarg overflow %zd+%zd+%zd+1 > %zd\n",
- strlen(label->append ?: ""),
- strlen(ip_str), strlen(mac_str),
- sizeof(bootargs));
- return 1;
- } else {
- if (label->append)
- strncpy(bootargs, label->append,
- sizeof(bootargs));
- strcat(bootargs, ip_str);
- strcat(bootargs, mac_str);
-
- cli_simple_process_macros(bootargs, finalbootargs);
- env_set("bootargs", finalbootargs);
- printf("append: %s\n", finalbootargs);
- }
- }
-
- bootm_argv[1] = env_get("kernel_addr_r");
- /* for FIT, append the configuration identifier */
- if (label->config) {
- int len = strlen(bootm_argv[1]) + strlen(label->config) + 1;
-
- fit_addr = malloc(len);
- if (!fit_addr) {
- printf("malloc fail (FIT address)\n");
- return 1;
- }
- snprintf(fit_addr, len, "%s%s", bootm_argv[1], label->config);
- bootm_argv[1] = fit_addr;
- }
-
- /*
- * fdt usage is optional:
- * It handles the following scenarios. All scenarios are exclusive
- *
- * Scenario 1: If fdt_addr_r specified and "fdt" label is defined in
- * pxe file, retrieve fdt blob from server. Pass fdt_addr_r to bootm,
- * and adjust argc appropriately.
- *
- * Scenario 2: If there is an fdt_addr specified, pass it along to
- * bootm, and adjust argc appropriately.
- *
- * Scenario 3: fdt blob is not available.
- */
- bootm_argv[3] = env_get("fdt_addr_r");
-
- /* if fdt label is defined then get fdt from server */
- if (bootm_argv[3]) {
- char *fdtfile = NULL;
- char *fdtfilefree = NULL;
-
- if (label->fdt) {
- fdtfile = label->fdt;
- } else if (label->fdtdir) {
- char *f1, *f2, *f3, *f4, *slash;
-
- f1 = env_get("fdtfile");
- if (f1) {
- f2 = "";
- f3 = "";
- f4 = "";
- } else {
- /*
- * For complex cases where this code doesn't
- * generate the correct filename, the board
- * code should set $fdtfile during early boot,
- * or the boot scripts should set $fdtfile
- * before invoking "pxe" or "sysboot".
- */
- f1 = env_get("soc");
- f2 = "-";
- f3 = env_get("board");
- f4 = ".dtb";
- }
-
- len = strlen(label->fdtdir);
- if (!len)
- slash = "./";
- else if (label->fdtdir[len - 1] != '/')
- slash = "/";
- else
- slash = "";
-
- len = strlen(label->fdtdir) + strlen(slash) +
- strlen(f1) + strlen(f2) + strlen(f3) +
- strlen(f4) + 1;
- fdtfilefree = malloc(len);
- if (!fdtfilefree) {
- printf("malloc fail (FDT filename)\n");
- goto cleanup;
- }
-
- snprintf(fdtfilefree, len, "%s%s%s%s%s%s",
- label->fdtdir, slash, f1, f2, f3, f4);
- fdtfile = fdtfilefree;
- }
-
- if (fdtfile) {
- int err = get_relfile_envaddr(cmdtp, fdtfile, "fdt_addr_r");
- free(fdtfilefree);
- if (err < 0) {
- printf("Skipping %s for failure retrieving fdt\n",
- label->name);
- goto cleanup;
- }
- } else {
- bootm_argv[3] = NULL;
- }
- }
-
- if (!bootm_argv[3])
- bootm_argv[3] = env_get("fdt_addr");
-
- if (bootm_argv[3]) {
- if (!bootm_argv[2])
- bootm_argv[2] = "-";
- bootm_argc = 4;
- }
-
- kernel_addr = genimg_get_kernel_addr(bootm_argv[1]);
- buf = map_sysmem(kernel_addr, 0);
- /* Try bootm for legacy and FIT format image */
- if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID)
- do_bootm(cmdtp, 0, bootm_argc, bootm_argv);
-#ifdef CONFIG_CMD_BOOTI
- /* Try booting an AArch64 Linux kernel image */
- else
- do_booti(cmdtp, 0, bootm_argc, bootm_argv);
-#elif defined(CONFIG_CMD_BOOTZ)
- /* Try booting a Image */
- else
- do_bootz(cmdtp, 0, bootm_argc, bootm_argv);
-#endif
- unmap_sysmem(buf);
-
-cleanup:
- if (fit_addr)
- free(fit_addr);
- return 1;
-}
-
-/*
- * Tokens for the pxe file parser.
- */
-enum token_type {
- T_EOL,
- T_STRING,
- T_EOF,
- T_MENU,
- T_TITLE,
- T_TIMEOUT,
- T_LABEL,
- T_KERNEL,
- T_LINUX,
- T_APPEND,
- T_INITRD,
- T_LOCALBOOT,
- T_DEFAULT,
- T_PROMPT,
- T_INCLUDE,
- T_FDT,
- T_FDTDIR,
- T_ONTIMEOUT,
- T_IPAPPEND,
- T_BACKGROUND,
- T_INVALID
-};
-/*
- * A token - given by a value and a type.
- */
-struct token {
- char *val;
- enum token_type type;
-};
-
-/*
- * Keywords recognized.
- */
-static const struct token keywords[] = {
- {"menu", T_MENU},
- {"title", T_TITLE},
- {"timeout", T_TIMEOUT},
- {"default", T_DEFAULT},
- {"prompt", T_PROMPT},
- {"label", T_LABEL},
- {"kernel", T_KERNEL},
- {"linux", T_LINUX},
- {"localboot", T_LOCALBOOT},
- {"append", T_APPEND},
- {"initrd", T_INITRD},
- {"include", T_INCLUDE},
- {"devicetree", T_FDT},
- {"fdt", T_FDT},
- {"devicetreedir", T_FDTDIR},
- {"fdtdir", T_FDTDIR},
- {"ontimeout", T_ONTIMEOUT,},
- {"ipappend", T_IPAPPEND,},
- {"background", T_BACKGROUND,},
- {NULL, T_INVALID}
-};
-
-/*
- * Since pxe(linux) files don't have a token to identify the start of a
- * literal, we have to keep track of when we're in a state where a literal is
- * expected vs when we're in a state a keyword is expected.
- */
-enum lex_state {
- L_NORMAL = 0,
- L_KEYWORD,
- L_SLITERAL
-};
-
-/*
- * get_string retrieves a string from *p and stores it as a token in
- * *t.
- *
- * get_string used for scanning both string literals and keywords.
- *
- * Characters from *p are copied into t-val until a character equal to
- * delim is found, or a NUL byte is reached. If delim has the special value of
- * ' ', any whitespace character will be used as a delimiter.
- *
- * If lower is unequal to 0, uppercase characters will be converted to
- * lowercase in the result. This is useful to make keywords case
- * insensitive.
- *
- * The location of *p is updated to point to the first character after the end
- * of the token - the ending delimiter.
- *
- * On success, the new value of t->val is returned. Memory for t->val is
- * allocated using malloc and must be free()'d to reclaim it. If insufficient
- * memory is available, NULL is returned.
- */
-static char *get_string(char **p, struct token *t, char delim, int lower)
-{
- char *b, *e;
- size_t len, i;
-
- /*
- * b and e both start at the beginning of the input stream.
- *
- * e is incremented until we find the ending delimiter, or a NUL byte
- * is reached. Then, we take e - b to find the length of the token.
- */
- b = e = *p;
-
- while (*e) {
- if ((delim == ' ' && isspace(*e)) || delim == *e)
- break;
- e++;
- }
-
- len = e - b;
-
- /*
- * Allocate memory to hold the string, and copy it in, converting
- * characters to lowercase if lower is != 0.
- */
- t->val = malloc(len + 1);
- if (!t->val)
- return NULL;
-
- for (i = 0; i < len; i++, b++) {
- if (lower)
- t->val[i] = tolower(*b);
- else
- t->val[i] = *b;
- }
-
- t->val[len] = '\0';
-
- /*
- * Update *p so the caller knows where to continue scanning.
- */
- *p = e;
-
- t->type = T_STRING;
-
- return t->val;
-}
-
-/*
- * Populate a keyword token with a type and value.
- */
-static void get_keyword(struct token *t)
-{
- int i;
-
- for (i = 0; keywords[i].val; i++) {
- if (!strcmp(t->val, keywords[i].val)) {
- t->type = keywords[i].type;
- break;
- }
- }
-}
-
-/*
- * Get the next token. We have to keep track of which state we're in to know
- * if we're looking to get a string literal or a keyword.
- *
- * *p is updated to point at the first character after the current token.
- */
-static void get_token(char **p, struct token *t, enum lex_state state)
-{
- char *c = *p;
-
- t->type = T_INVALID;
-
- /* eat non EOL whitespace */
- while (isblank(*c))
- c++;
-
- /*
- * eat comments. note that string literals can't begin with #, but
- * can contain a # after their first character.
- */
- if (*c == '#') {
- while (*c && *c != '\n')
- c++;
- }
-
- if (*c == '\n') {
- t->type = T_EOL;
- c++;
- } else if (*c == '\0') {
- t->type = T_EOF;
- c++;
- } else if (state == L_SLITERAL) {
- get_string(&c, t, '\n', 0);
- } else if (state == L_KEYWORD) {
- /*
- * when we expect a keyword, we first get the next string
- * token delimited by whitespace, and then check if it
- * matches a keyword in our keyword list. if it does, it's
- * converted to a keyword token of the appropriate type, and
- * if not, it remains a string token.
- */
- get_string(&c, t, ' ', 1);
- get_keyword(t);
- }
-
- *p = c;
-}
-
-/*
- * Increment *c until we get to the end of the current line, or EOF.
- */
-static void eol_or_eof(char **c)
-{
- while (**c && **c != '\n')
- (*c)++;
-}
-
-/*
- * All of these parse_* functions share some common behavior.
- *
- * They finish with *c pointing after the token they parse, and return 1 on
- * success, or < 0 on error.
- */
-
-/*
- * Parse a string literal and store a pointer it at *dst. String literals
- * terminate at the end of the line.
- */
-static int parse_sliteral(char **c, char **dst)
-{
- struct token t;
- char *s = *c;
-
- get_token(c, &t, L_SLITERAL);
-
- if (t.type != T_STRING) {
- printf("Expected string literal: %.*s\n", (int)(*c - s), s);
- return -EINVAL;
- }
-
- *dst = t.val;
-
- return 1;
-}
-
-/*
- * Parse a base 10 (unsigned) integer and store it at *dst.
- */
-static int parse_integer(char **c, int *dst)
-{
- struct token t;
- char *s = *c;
-
- get_token(c, &t, L_SLITERAL);
-
- if (t.type != T_STRING) {
- printf("Expected string: %.*s\n", (int)(*c - s), s);
- return -EINVAL;
- }
-
- *dst = simple_strtol(t.val, NULL, 10);
-
- free(t.val);
-
- return 1;
-}
-
-static int parse_pxefile_top(cmd_tbl_t *cmdtp, char *p, unsigned long base,
- struct pxe_menu *cfg, int nest_level);
-
-/*
- * Parse an include statement, and retrieve and parse the file it mentions.
- *
- * base should point to a location where it's safe to store the file, and
- * nest_level should indicate how many nested includes have occurred. For this
- * include, nest_level has already been incremented and doesn't need to be
- * incremented here.
- */
-static int handle_include(cmd_tbl_t *cmdtp, char **c, unsigned long base,
- struct pxe_menu *cfg, int nest_level)
-{
- char *include_path;
- char *s = *c;
- int err;
- char *buf;
- int ret;
-
- err = parse_sliteral(c, &include_path);
-
- if (err < 0) {
- printf("Expected include path: %.*s\n",
- (int)(*c - s), s);
- return err;
- }
-
- err = get_pxe_file(cmdtp, include_path, base);
-
- if (err < 0) {
- printf("Couldn't retrieve %s\n", include_path);
- return err;
- }
-
- buf = map_sysmem(base, 0);
- ret = parse_pxefile_top(cmdtp, buf, base, cfg, nest_level);
- unmap_sysmem(buf);
-
- return ret;
-}
-
-/*
- * Parse lines that begin with 'menu'.
- *
- * base and nest are provided to handle the 'menu include' case.
- *
- * base should point to a location where it's safe to store the included file.
- *
- * nest_level should be 1 when parsing the top level pxe file, 2 when parsing
- * a file it includes, 3 when parsing a file included by that file, and so on.
- */
-static int parse_menu(cmd_tbl_t *cmdtp, char **c, struct pxe_menu *cfg,
- unsigned long base, int nest_level)
-{
- struct token t;
- char *s = *c;
- int err = 0;
-
- get_token(c, &t, L_KEYWORD);
-
- switch (t.type) {
- case T_TITLE:
- err = parse_sliteral(c, &cfg->title);
-
- break;
-
- case T_INCLUDE:
- err = handle_include(cmdtp, c, base, cfg,
- nest_level + 1);
- break;
-
- case T_BACKGROUND:
- err = parse_sliteral(c, &cfg->bmp);
- break;
-
- default:
- printf("Ignoring malformed menu command: %.*s\n",
- (int)(*c - s), s);
- }
-
- if (err < 0)
- return err;
-
- eol_or_eof(c);
-
- return 1;
-}
-
-/*
- * Handles parsing a 'menu line' when we're parsing a label.
- */
-static int parse_label_menu(char **c, struct pxe_menu *cfg,
- struct pxe_label *label)
-{
- struct token t;
- char *s;
-
- s = *c;
-
- get_token(c, &t, L_KEYWORD);
-
- switch (t.type) {
- case T_DEFAULT:
- if (!cfg->default_label)
- cfg->default_label = strdup(label->name);
-
- if (!cfg->default_label)
- return -ENOMEM;
-
- break;
- case T_LABEL:
- parse_sliteral(c, &label->menu);
- break;
- default:
- printf("Ignoring malformed menu command: %.*s\n",
- (int)(*c - s), s);
- }
-
- eol_or_eof(c);
-
- return 0;
-}
-
-/*
- * Handles parsing a 'kernel' label.
- * expecting "filename" or "<fit_filename>#cfg"
- */
-static int parse_label_kernel(char **c, struct pxe_label *label)
-{
- char *s;
- int err;
-
- err = parse_sliteral(c, &label->kernel);
- if (err < 0)
- return err;
-
- s = strstr(label->kernel, "#");
- if (!s)
- return 1;
-
- label->config = malloc(strlen(s) + 1);
- if (!label->config)
- return -ENOMEM;
-
- strcpy(label->config, s);
- *s = 0;
-
- return 1;
-}
-
-/*
- * Parses a label and adds it to the list of labels for a menu.
- *
- * A label ends when we either get to the end of a file, or
- * get some input we otherwise don't have a handler defined
- * for.
- *
- */
-static int parse_label(char **c, struct pxe_menu *cfg)
-{
- struct token t;
- int len;
- char *s = *c;
- struct pxe_label *label;
- int err;
-
- label = label_create();
- if (!label)
- return -ENOMEM;
-
- err = parse_sliteral(c, &label->name);
- if (err < 0) {
- printf("Expected label name: %.*s\n", (int)(*c - s), s);
- label_destroy(label);
- return -EINVAL;
- }
-
- list_add_tail(&label->list, &cfg->labels);
-
- while (1) {
- s = *c;
- get_token(c, &t, L_KEYWORD);
-
- err = 0;
- switch (t.type) {
- case T_MENU:
- err = parse_label_menu(c, cfg, label);
- break;
-
- case T_KERNEL:
- case T_LINUX:
- err = parse_label_kernel(c, label);
- break;
-
- case T_APPEND:
- err = parse_sliteral(c, &label->append);
- if (label->initrd)
- break;
- s = strstr(label->append, "initrd=");
- if (!s)
- break;
- s += 7;
- len = (int)(strchr(s, ' ') - s);
- label->initrd = malloc(len + 1);
- strncpy(label->initrd, s, len);
- label->initrd[len] = '\0';
-
- break;
-
- case T_INITRD:
- if (!label->initrd)
- err = parse_sliteral(c, &label->initrd);
- break;
-
- case T_FDT:
- if (!label->fdt)
- err = parse_sliteral(c, &label->fdt);
- break;
-
- case T_FDTDIR:
- if (!label->fdtdir)
- err = parse_sliteral(c, &label->fdtdir);
- break;
-
- case T_LOCALBOOT:
- label->localboot = 1;
- err = parse_integer(c, &label->localboot_val);
- break;
-
- case T_IPAPPEND:
- err = parse_integer(c, &label->ipappend);
- break;
-
- case T_EOL:
- break;
-
- default:
- /*
- * put the token back! we don't want it - it's the end
- * of a label and whatever token this is, it's
- * something for the menu level context to handle.
- */
- *c = s;
- return 1;
- }
-
- if (err < 0)
- return err;
- }
-}
-
-/*
- * This 16 comes from the limit pxelinux imposes on nested includes.
- *
- * There is no reason at all we couldn't do more, but some limit helps prevent
- * infinite (until crash occurs) recursion if a file tries to include itself.
- */
-#define MAX_NEST_LEVEL 16
-
-/*
- * Entry point for parsing a menu file. nest_level indicates how many times
- * we've nested in includes. It will be 1 for the top level menu file.
- *
- * Returns 1 on success, < 0 on error.
- */
-static int parse_pxefile_top(cmd_tbl_t *cmdtp, char *p, unsigned long base,
- struct pxe_menu *cfg, int nest_level)
-{
- struct token t;
- char *s, *b, *label_name;
- int err;
-
- b = p;
-
- if (nest_level > MAX_NEST_LEVEL) {
- printf("Maximum nesting (%d) exceeded\n", MAX_NEST_LEVEL);
- return -EMLINK;
- }
-
- while (1) {
- s = p;
-
- get_token(&p, &t, L_KEYWORD);
-
- err = 0;
- switch (t.type) {
- case T_MENU:
- cfg->prompt = 1;
- err = parse_menu(cmdtp, &p, cfg,
- base + ALIGN(strlen(b) + 1, 4),
- nest_level);
- break;
-
- case T_TIMEOUT:
- err = parse_integer(&p, &cfg->timeout);
- break;
-
- case T_LABEL:
- err = parse_label(&p, cfg);
- break;
-
- case T_DEFAULT:
- case T_ONTIMEOUT:
- err = parse_sliteral(&p, &label_name);
-
- if (label_name) {
- if (cfg->default_label)
- free(cfg->default_label);
-
- cfg->default_label = label_name;
- }
-
- break;
-
- case T_INCLUDE:
- err = handle_include(cmdtp, &p,
- base + ALIGN(strlen(b), 4), cfg,
- nest_level + 1);
- break;
-
- case T_PROMPT:
- eol_or_eof(&p);
- break;
-
- case T_EOL:
- break;
-
- case T_EOF:
- return 1;
-
- default:
- printf("Ignoring unknown command: %.*s\n",
- (int)(p - s), s);
- eol_or_eof(&p);
- }
-
- if (err < 0)
- return err;
- }
-}
-
-/*
- * Free the memory used by a pxe_menu and its labels.
- */
-static void destroy_pxe_menu(struct pxe_menu *cfg)
-{
- struct list_head *pos, *n;
- struct pxe_label *label;
-
- if (cfg->title)
- free(cfg->title);
-
- if (cfg->default_label)
- free(cfg->default_label);
-
- list_for_each_safe(pos, n, &cfg->labels) {
- label = list_entry(pos, struct pxe_label, list);
-
- label_destroy(label);
- }
-
- free(cfg);
-}
-
-/*
- * Entry point for parsing a pxe file. This is only used for the top level
- * file.
- *
- * Returns NULL if there is an error, otherwise, returns a pointer to a
- * pxe_menu struct populated with the results of parsing the pxe file (and any
- * files it includes). The resulting pxe_menu struct can be free()'d by using
- * the destroy_pxe_menu() function.
- */
-static struct pxe_menu *parse_pxefile(cmd_tbl_t *cmdtp, unsigned long menucfg)
-{
- struct pxe_menu *cfg;
- char *buf;
- int r;
-
- cfg = malloc(sizeof(struct pxe_menu));
-
- if (!cfg)
- return NULL;
-
- memset(cfg, 0, sizeof(struct pxe_menu));
-
- INIT_LIST_HEAD(&cfg->labels);
-
- buf = map_sysmem(menucfg, 0);
- r = parse_pxefile_top(cmdtp, buf, menucfg, cfg, 1);
- unmap_sysmem(buf);
-
- if (r < 0) {
- destroy_pxe_menu(cfg);
- return NULL;
- }
-
- return cfg;
-}
-
-/*
- * Converts a pxe_menu struct into a menu struct for use with U-Boot's generic
- * menu code.
- */
-static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
-{
- struct pxe_label *label;
- struct list_head *pos;
- struct menu *m;
- int err;
- int i = 1;
- char *default_num = NULL;
-
- /*
- * Create a menu and add items for all the labels.
- */
- m = menu_create(cfg->title, DIV_ROUND_UP(cfg->timeout, 10),
- cfg->prompt, label_print, NULL, NULL);
-
- if (!m)
- return NULL;
-
- list_for_each(pos, &cfg->labels) {
- label = list_entry(pos, struct pxe_label, list);
-
- sprintf(label->num, "%d", i++);
- if (menu_item_add(m, label->num, label) != 1) {
- menu_destroy(m);
- return NULL;
- }
- if (cfg->default_label &&
- (strcmp(label->name, cfg->default_label) == 0))
- default_num = label->num;
-
- }
-
- /*
- * After we've created items for each label in the menu, set the
- * menu's default label if one was specified.
- */
- if (default_num) {
- err = menu_default_set(m, default_num);
- if (err != 1) {
- if (err != -ENOENT) {
- menu_destroy(m);
- return NULL;
- }
-
- printf("Missing default: %s\n", cfg->default_label);
- }
- }
-
- return m;
-}
-
-/*
- * Try to boot any labels we have yet to attempt to boot.
- */
-static void boot_unattempted_labels(cmd_tbl_t *cmdtp, struct pxe_menu *cfg)
-{
- struct list_head *pos;
- struct pxe_label *label;
-
- list_for_each(pos, &cfg->labels) {
- label = list_entry(pos, struct pxe_label, list);
-
- if (!label->attempted)
- label_boot(cmdtp, label);
- }
-}
-
-/*
- * Boot the system as prescribed by a pxe_menu.
- *
- * Use the menu system to either get the user's choice or the default, based
- * on config or user input. If there is no default or user's choice,
- * attempted to boot labels in the order they were given in pxe files.
- * If the default or user's choice fails to boot, attempt to boot other
- * labels in the order they were given in pxe files.
- *
- * If this function returns, there weren't any labels that successfully
- * booted, or the user interrupted the menu selection via ctrl+c.
- */
-static void handle_pxe_menu(cmd_tbl_t *cmdtp, struct pxe_menu *cfg)
-{
- void *choice;
- struct menu *m;
- int err;
-
-#ifdef CONFIG_CMD_BMP
- /* display BMP if available */
- if (cfg->bmp) {
- if (get_relfile(cmdtp, cfg->bmp, load_addr)) {
- run_command("cls", 0);
- bmp_display(load_addr,
- BMP_ALIGN_CENTER, BMP_ALIGN_CENTER);
- } else {
- printf("Skipping background bmp %s for failure\n",
- cfg->bmp);
- }
- }
-#endif
-
- m = pxe_menu_to_menu(cfg);
- if (!m)
- return;
-
- err = menu_get_choice(m, &choice);
-
- menu_destroy(m);
-
- /*
- * err == 1 means we got a choice back from menu_get_choice.
- *
- * err == -ENOENT if the menu was setup to select the default but no
- * default was set. in that case, we should continue trying to boot
- * labels that haven't been attempted yet.
- *
- * otherwise, the user interrupted or there was some other error and
- * we give up.
- */
-
- if (err == 1) {
- err = label_boot(cmdtp, choice);
- if (!err)
- return;
- } else if (err != -ENOENT) {
- return;
- }
-
- boot_unattempted_labels(cmdtp, cfg);
-}
-
-#ifdef CONFIG_CMD_NET
/*
* Boots a system using a pxe file
*
diff --git a/cmd/pxe_utils.c b/cmd/pxe_utils.c
new file mode 100644
index 0000000000..c318f98417
--- /dev/null
+++ b/cmd/pxe_utils.c
@@ -0,0 +1,1414 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <common.h>
+#include <env.h>
+#include <malloc.h>
+#include <mapmem.h>
+#include <lcd.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <errno.h>
+#include <linux/list.h>
+
+#include <splash.h>
+#include <asm/io.h>
+
+#include "menu.h"
+#include "cli.h"
+
+#include "pxe_utils.h"
+
+#define MAX_TFTP_PATH_LEN 127
+
+bool is_pxe;
+
+/*
+ * Convert an ethaddr from the environment to the format used by pxelinux
+ * filenames based on mac addresses. Convert's ':' to '-', and adds "01-" to
+ * the beginning of the ethernet address to indicate a hardware type of
+ * Ethernet. Also converts uppercase hex characters into lowercase, to match
+ * pxelinux's behavior.
+ *
+ * Returns 1 for success, -ENOENT if 'ethaddr' is undefined in the
+ * environment, or some other value < 0 on error.
+ */
+static int format_mac_pxe(char *outbuf, size_t outbuf_len)
+{
+ uchar ethaddr[6];
+
+ if (outbuf_len < 21) {
+ printf("outbuf is too small (%zd < 21)\n", outbuf_len);
+
+ return -EINVAL;
+ }
+
+ if (!eth_env_get_enetaddr_by_index("eth", eth_get_dev_index(), ethaddr))
+ return -ENOENT;
+
+ sprintf(outbuf, "01-%02x-%02x-%02x-%02x-%02x-%02x",
+ ethaddr[0], ethaddr[1], ethaddr[2],
+ ethaddr[3], ethaddr[4], ethaddr[5]);
+
+ return 1;
+}
+
+/*
+ * Returns the directory the file specified in the bootfile env variable is
+ * in. If bootfile isn't defined in the environment, return NULL, which should
+ * be interpreted as "don't prepend anything to paths".
+ */
+static int get_bootfile_path(const char *file_path, char *bootfile_path,
+ size_t bootfile_path_size)
+{
+ char *bootfile, *last_slash;
+ size_t path_len = 0;
+
+ /* Only syslinux allows absolute paths */
+ if (file_path[0] == '/' && !is_pxe)
+ goto ret;
+
+ bootfile = from_env("bootfile");
+
+ if (!bootfile)
+ goto ret;
+
+ last_slash = strrchr(bootfile, '/');
+
+ if (last_slash == NULL )
+ goto ret;
+
+ path_len = (last_slash - bootfile) + 1;
+
+ if (bootfile_path_size < path_len) {
+ printf("bootfile_path too small. (%zd < %zd)\n",
+ bootfile_path_size, path_len);
+
+ return -1;
+ }
+
+ strncpy(bootfile_path, bootfile, path_len);
+
+ ret:
+ bootfile_path[path_len] = '\0';
+
+ return 1;
+}
+
+int (*do_getfile)(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr);
+
+/*
+ * As in pxelinux, paths to files referenced from files we retrieve are
+ * relative to the location of bootfile. get_relfile takes such a path and
+ * joins it with the bootfile path to get the full path to the target file. If
+ * the bootfile path is NULL, we use file_path as is.
+ *
+ * Returns 1 for success, or < 0 on error.
+ */
+static int get_relfile(cmd_tbl_t *cmdtp, const char *file_path,
+ unsigned long file_addr)
+{
+ size_t path_len;
+ char relfile[MAX_TFTP_PATH_LEN+1];
+ char addr_buf[18];
+ int err;
+
+ err = get_bootfile_path(file_path, relfile, sizeof(relfile));
+
+ if (err < 0)
+ return err;
+
+ path_len = strlen(file_path);
+ path_len += strlen(relfile);
+
+ if (path_len > MAX_TFTP_PATH_LEN) {
+ printf("Base path too long (%s%s)\n",
+ relfile,
+ file_path);
+
+ return -ENAMETOOLONG;
+ }
+
+ strcat(relfile, file_path);
+
+ printf("Retrieving file: %s\n", relfile);
+
+ sprintf(addr_buf, "%lx", file_addr);
+
+ return do_getfile(cmdtp, relfile, addr_buf);
+}
+
+/*
+ * Retrieve the file at 'file_path' to the locate given by 'file_addr'. If
+ * 'bootfile' was specified in the environment, the path to bootfile will be
+ * prepended to 'file_path' and the resulting path will be used.
+ *
+ * Returns 1 on success, or < 0 for error.
+ */
+int get_pxe_file(cmd_tbl_t *cmdtp, const char *file_path,
+ unsigned long file_addr)
+{
+ unsigned long config_file_size;
+ char *tftp_filesize;
+ int err;
+ char *buf;
+
+ err = get_relfile(cmdtp, file_path, file_addr);
+
+ if (err < 0)
+ return err;
+
+ /*
+ * the file comes without a NUL byte at the end, so find out its size
+ * and add the NUL byte.
+ */
+ tftp_filesize = from_env("filesize");
+
+ if (!tftp_filesize)
+ return -ENOENT;
+
+ if (strict_strtoul(tftp_filesize, 16, &config_file_size) < 0)
+ return -EINVAL;
+
+ buf = map_sysmem(file_addr + config_file_size, 1);
+ *buf = '\0';
+ unmap_sysmem(buf);
+
+ return 1;
+}
+
+#define PXELINUX_DIR "pxelinux.cfg/"
+
+
+/*
+ * Retrieves a file in the 'pxelinux.cfg' folder. Since this uses get_pxe_file
+ * to do the hard work, the location of the 'pxelinux.cfg' folder is generated
+ * from the bootfile path, as described above.
+ *
+ * Returns 1 on success or < 0 on error.
+ */
+int get_pxelinux_path(cmd_tbl_t *cmdtp, const char *file,
+ unsigned long pxefile_addr_r)
+{
+ size_t base_len = strlen(PXELINUX_DIR);
+ char path[MAX_TFTP_PATH_LEN+1];
+
+ if (base_len + strlen(file) > MAX_TFTP_PATH_LEN) {
+ printf("path (%s%s) too long, skipping\n",
+ PXELINUX_DIR, file);
+ return -ENAMETOOLONG;
+ }
+
+ sprintf(path, PXELINUX_DIR "%s", file);
+
+ return get_pxe_file(cmdtp, path, pxefile_addr_r);
+}
+
+/*
+ * Looks for a pxe file with a name based on the pxeuuid environment variable.
+ *
+ * Returns 1 on success or < 0 on error.
+ */
+int pxe_uuid_path(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r)
+{
+ char *uuid_str;
+
+ uuid_str = from_env("pxeuuid");
+
+ if (!uuid_str)
+ return -ENOENT;
+
+ return get_pxelinux_path(cmdtp, uuid_str, pxefile_addr_r);
+}
+
+/*
+ * Looks for a pxe file with a name based on the 'ethaddr' environment
+ * variable.
+ *
+ * Returns 1 on success or < 0 on error.
+ */
+int pxe_mac_path(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r)
+{
+ char mac_str[21];
+ int err;
+
+ err = format_mac_pxe(mac_str, sizeof(mac_str));
+
+ if (err < 0)
+ return err;
+
+ return get_pxelinux_path(cmdtp, mac_str, pxefile_addr_r);
+}
+
+/*
+ * Looks for pxe files with names based on our IP address. See pxelinux
+ * documentation for details on what these file names look like. We match
+ * that exactly.
+ *
+ * Returns 1 on success or < 0 on error.
+ */
+int pxe_ipaddr_paths(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r)
+{
+ char ip_addr[9];
+ int mask_pos, err;
+
+ sprintf(ip_addr, "%08X", ntohl(net_ip.s_addr));
+
+ for (mask_pos = 7; mask_pos >= 0; mask_pos--) {
+ err = get_pxelinux_path(cmdtp, ip_addr, pxefile_addr_r);
+
+ if (err > 0)
+ return err;
+
+ ip_addr[mask_pos] = '\0';
+ }
+
+ return -ENOENT;
+}
+
+/*
+ * Wrapper to make it easier to store the file at file_path in the location
+ * specified by envaddr_name. file_path will be joined to the bootfile path,
+ * if any is specified.
+ *
+ * Returns 1 on success or < 0 on error.
+ */
+static int get_relfile_envaddr(cmd_tbl_t *cmdtp, const char *file_path, const char *envaddr_name)
+{
+ unsigned long file_addr;
+ char *envaddr;
+
+ envaddr = from_env(envaddr_name);
+
+ if (!envaddr)
+ return -ENOENT;
+
+ if (strict_strtoul(envaddr, 16, &file_addr) < 0)
+ return -EINVAL;
+
+ return get_relfile(cmdtp, file_path, file_addr);
+}
+
+/*
+ * Allocates memory for and initializes a pxe_label. This uses malloc, so the
+ * result must be free()'d to reclaim the memory.
+ *
+ * Returns NULL if malloc fails.
+ */
+static struct pxe_label *label_create(void)
+{
+ struct pxe_label *label;
+
+ label = malloc(sizeof(struct pxe_label));
+
+ if (!label)
+ return NULL;
+
+ memset(label, 0, sizeof(struct pxe_label));
+
+ return label;
+}
+
+/*
+ * Free the memory used by a pxe_label, including that used by its name,
+ * kernel, append and initrd members, if they're non NULL.
+ *
+ * So - be sure to only use dynamically allocated memory for the members of
+ * the pxe_label struct, unless you want to clean it up first. These are
+ * currently only created by the pxe file parsing code.
+ */
+static void label_destroy(struct pxe_label *label)
+{
+ if (label->name)
+ free(label->name);
+
+ if (label->kernel)
+ free(label->kernel);
+
+ if (label->config)
+ free(label->config);
+
+ if (label->append)
+ free(label->append);
+
+ if (label->initrd)
+ free(label->initrd);
+
+ if (label->fdt)
+ free(label->fdt);
+
+ if (label->fdtdir)
+ free(label->fdtdir);
+
+ free(label);
+}
+
+/*
+ * Print a label and its string members if they're defined.
+ *
+ * This is passed as a callback to the menu code for displaying each
+ * menu entry.
+ */
+static void label_print(void *data)
+{
+ struct pxe_label *label = data;
+ const char *c = label->menu ? label->menu : label->name;
+
+ printf("%s:\t%s\n", label->num, c);
+}
+
+/*
+ * Boot a label that specified 'localboot'. This requires that the 'localcmd'
+ * environment variable is defined. Its contents will be executed as U-Boot
+ * command. If the label specified an 'append' line, its contents will be
+ * used to overwrite the contents of the 'bootargs' environment variable prior
+ * to running 'localcmd'.
+ *
+ * Returns 1 on success or < 0 on error.
+ */
+static int label_localboot(struct pxe_label *label)
+{
+ char *localcmd;
+
+ localcmd = from_env("localcmd");
+
+ if (!localcmd)
+ return -ENOENT;
+
+ if (label->append) {
+ char bootargs[CONFIG_SYS_CBSIZE];
+
+ cli_simple_process_macros(label->append, bootargs);
+ env_set("bootargs", bootargs);
+ }
+
+ debug("running: %s\n", localcmd);
+
+ return run_command_list(localcmd, strlen(localcmd), 0);
+}
+
+/*
+ * Boot according to the contents of a pxe_label.
+ *
+ * If we can't boot for any reason, we return. A successful boot never
+ * returns.
+ *
+ * The kernel will be stored in the location given by the 'kernel_addr_r'
+ * environment variable.
+ *
+ * If the label specifies an initrd file, it will be stored in the location
+ * given by the 'ramdisk_addr_r' environment variable.
+ *
+ * If the label specifies an 'append' line, its contents will overwrite that
+ * of the 'bootargs' environment variable.
+ */
+static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label)
+{
+ char *bootm_argv[] = { "bootm", NULL, NULL, NULL, NULL };
+ char initrd_str[28];
+ char mac_str[29] = "";
+ char ip_str[68] = "";
+ char *fit_addr = NULL;
+ int bootm_argc = 2;
+ int len = 0;
+ ulong kernel_addr;
+ void *buf;
+
+ label_print(label);
+
+ label->attempted = 1;
+
+ if (label->localboot) {
+ if (label->localboot_val >= 0)
+ label_localboot(label);
+ return 0;
+ }
+
+ if (label->kernel == NULL) {
+ printf("No kernel given, skipping %s\n",
+ label->name);
+ return 1;
+ }
+
+ if (label->initrd) {
+ if (get_relfile_envaddr(cmdtp, label->initrd, "ramdisk_addr_r") < 0) {
+ printf("Skipping %s for failure retrieving initrd\n",
+ label->name);
+ return 1;
+ }
+
+ bootm_argv[2] = initrd_str;
+ strncpy(bootm_argv[2], env_get("ramdisk_addr_r"), 18);
+ strcat(bootm_argv[2], ":");
+ strncat(bootm_argv[2], env_get("filesize"), 9);
+ }
+
+ if (get_relfile_envaddr(cmdtp, label->kernel, "kernel_addr_r") < 0) {
+ printf("Skipping %s for failure retrieving kernel\n",
+ label->name);
+ return 1;
+ }
+
+ if (label->ipappend & 0x1) {
+ sprintf(ip_str, " ip=%s:%s:%s:%s",
+ env_get("ipaddr"), env_get("serverip"),
+ env_get("gatewayip"), env_get("netmask"));
+ }
+
+#ifdef CONFIG_CMD_NET
+ if (label->ipappend & 0x2) {
+ int err;
+ strcpy(mac_str, " BOOTIF=");
+ err = format_mac_pxe(mac_str + 8, sizeof(mac_str) - 8);
+ if (err < 0)
+ mac_str[0] = '\0';
+ }
+#endif
+
+ if ((label->ipappend & 0x3) || label->append) {
+ char bootargs[CONFIG_SYS_CBSIZE] = "";
+ char finalbootargs[CONFIG_SYS_CBSIZE];
+
+ if (strlen(label->append ?: "") +
+ strlen(ip_str) + strlen(mac_str) + 1 > sizeof(bootargs)) {
+ printf("bootarg overflow %zd+%zd+%zd+1 > %zd\n",
+ strlen(label->append ?: ""),
+ strlen(ip_str), strlen(mac_str),
+ sizeof(bootargs));
+ return 1;
+ } else {
+ if (label->append)
+ strncpy(bootargs, label->append,
+ sizeof(bootargs));
+ strcat(bootargs, ip_str);
+ strcat(bootargs, mac_str);
+
+ cli_simple_process_macros(bootargs, finalbootargs);
+ env_set("bootargs", finalbootargs);
+ printf("append: %s\n", finalbootargs);
+ }
+ }
+
+ bootm_argv[1] = env_get("kernel_addr_r");
+ /* for FIT, append the configuration identifier */
+ if (label->config) {
+ int len = strlen(bootm_argv[1]) + strlen(label->config) + 1;
+
+ fit_addr = malloc(len);
+ if (!fit_addr) {
+ printf("malloc fail (FIT address)\n");
+ return 1;
+ }
+ snprintf(fit_addr, len, "%s%s", bootm_argv[1], label->config);
+ bootm_argv[1] = fit_addr;
+ }
+
+ /*
+ * fdt usage is optional:
+ * It handles the following scenarios. All scenarios are exclusive
+ *
+ * Scenario 1: If fdt_addr_r specified and "fdt" label is defined in
+ * pxe file, retrieve fdt blob from server. Pass fdt_addr_r to bootm,
+ * and adjust argc appropriately.
+ *
+ * Scenario 2: If there is an fdt_addr specified, pass it along to
+ * bootm, and adjust argc appropriately.
+ *
+ * Scenario 3: fdt blob is not available.
+ */
+ bootm_argv[3] = env_get("fdt_addr_r");
+
+ /* if fdt label is defined then get fdt from server */
+ if (bootm_argv[3]) {
+ char *fdtfile = NULL;
+ char *fdtfilefree = NULL;
+
+ if (label->fdt) {
+ fdtfile = label->fdt;
+ } else if (label->fdtdir) {
+ char *f1, *f2, *f3, *f4, *slash;
+
+ f1 = env_get("fdtfile");
+ if (f1) {
+ f2 = "";
+ f3 = "";
+ f4 = "";
+ } else {
+ /*
+ * For complex cases where this code doesn't
+ * generate the correct filename, the board
+ * code should set $fdtfile during early boot,
+ * or the boot scripts should set $fdtfile
+ * before invoking "pxe" or "sysboot".
+ */
+ f1 = env_get("soc");
+ f2 = "-";
+ f3 = env_get("board");
+ f4 = ".dtb";
+ }
+
+ len = strlen(label->fdtdir);
+ if (!len)
+ slash = "./";
+ else if (label->fdtdir[len - 1] != '/')
+ slash = "/";
+ else
+ slash = "";
+
+ len = strlen(label->fdtdir) + strlen(slash) +
+ strlen(f1) + strlen(f2) + strlen(f3) +
+ strlen(f4) + 1;
+ fdtfilefree = malloc(len);
+ if (!fdtfilefree) {
+ printf("malloc fail (FDT filename)\n");
+ goto cleanup;
+ }
+
+ snprintf(fdtfilefree, len, "%s%s%s%s%s%s",
+ label->fdtdir, slash, f1, f2, f3, f4);
+ fdtfile = fdtfilefree;
+ }
+
+ if (fdtfile) {
+ int err = get_relfile_envaddr(cmdtp, fdtfile, "fdt_addr_r");
+ free(fdtfilefree);
+ if (err < 0) {
+ printf("Skipping %s for failure retrieving fdt\n",
+ label->name);
+ goto cleanup;
+ }
+ } else {
+ bootm_argv[3] = NULL;
+ }
+ }
+
+ if (!bootm_argv[3])
+ bootm_argv[3] = env_get("fdt_addr");
+
+ if (bootm_argv[3]) {
+ if (!bootm_argv[2])
+ bootm_argv[2] = "-";
+ bootm_argc = 4;
+ }
+
+ kernel_addr = genimg_get_kernel_addr(bootm_argv[1]);
+ buf = map_sysmem(kernel_addr, 0);
+ /* Try bootm for legacy and FIT format image */
+ if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID)
+ do_bootm(cmdtp, 0, bootm_argc, bootm_argv);
+#ifdef CONFIG_CMD_BOOTI
+ /* Try booting an AArch64 Linux kernel image */
+ else
+ do_booti(cmdtp, 0, bootm_argc, bootm_argv);
+#elif defined(CONFIG_CMD_BOOTZ)
+ /* Try booting a Image */
+ else
+ do_bootz(cmdtp, 0, bootm_argc, bootm_argv);
+#endif
+ unmap_sysmem(buf);
+
+cleanup:
+ if (fit_addr)
+ free(fit_addr);
+ return 1;
+}
+
+/*
+ * Tokens for the pxe file parser.
+ */
+enum token_type {
+ T_EOL,
+ T_STRING,
+ T_EOF,
+ T_MENU,
+ T_TITLE,
+ T_TIMEOUT,
+ T_LABEL,
+ T_KERNEL,
+ T_LINUX,
+ T_APPEND,
+ T_INITRD,
+ T_LOCALBOOT,
+ T_DEFAULT,
+ T_PROMPT,
+ T_INCLUDE,
+ T_FDT,
+ T_FDTDIR,
+ T_ONTIMEOUT,
+ T_IPAPPEND,
+ T_BACKGROUND,
+ T_INVALID
+};
+
+/*
+ * A token - given by a value and a type.
+ */
+struct token {
+ char *val;
+ enum token_type type;
+};
+
+/*
+ * Keywords recognized.
+ */
+static const struct token keywords[] = {
+ {"menu", T_MENU},
+ {"title", T_TITLE},
+ {"timeout", T_TIMEOUT},
+ {"default", T_DEFAULT},
+ {"prompt", T_PROMPT},
+ {"label", T_LABEL},
+ {"kernel", T_KERNEL},
+ {"linux", T_LINUX},
+ {"localboot", T_LOCALBOOT},
+ {"append", T_APPEND},
+ {"initrd", T_INITRD},
+ {"include", T_INCLUDE},
+ {"devicetree", T_FDT},
+ {"fdt", T_FDT},
+ {"devicetreedir", T_FDTDIR},
+ {"fdtdir", T_FDTDIR},
+ {"ontimeout", T_ONTIMEOUT,},
+ {"ipappend", T_IPAPPEND,},
+ {"background", T_BACKGROUND,},
+ {NULL, T_INVALID}
+};
+
+/*
+ * Since pxe(linux) files don't have a token to identify the start of a
+ * literal, we have to keep track of when we're in a state where a literal is
+ * expected vs when we're in a state a keyword is expected.
+ */
+enum lex_state {
+ L_NORMAL = 0,
+ L_KEYWORD,
+ L_SLITERAL
+};
+
+/*
+ * get_string retrieves a string from *p and stores it as a token in
+ * *t.
+ *
+ * get_string used for scanning both string literals and keywords.
+ *
+ * Characters from *p are copied into t-val until a character equal to
+ * delim is found, or a NUL byte is reached. If delim has the special value of
+ * ' ', any whitespace character will be used as a delimiter.
+ *
+ * If lower is unequal to 0, uppercase characters will be converted to
+ * lowercase in the result. This is useful to make keywords case
+ * insensitive.
+ *
+ * The location of *p is updated to point to the first character after the end
+ * of the token - the ending delimiter.
+ *
+ * On success, the new value of t->val is returned. Memory for t->val is
+ * allocated using malloc and must be free()'d to reclaim it. If insufficient
+ * memory is available, NULL is returned.
+ */
+static char *get_string(char **p, struct token *t, char delim, int lower)
+{
+ char *b, *e;
+ size_t len, i;
+
+ /*
+ * b and e both start at the beginning of the input stream.
+ *
+ * e is incremented until we find the ending delimiter, or a NUL byte
+ * is reached. Then, we take e - b to find the length of the token.
+ */
+ b = e = *p;
+
+ while (*e) {
+ if ((delim == ' ' && isspace(*e)) || delim == *e)
+ break;
+ e++;
+ }
+
+ len = e - b;
+
+ /*
+ * Allocate memory to hold the string, and copy it in, converting
+ * characters to lowercase if lower is != 0.
+ */
+ t->val = malloc(len + 1);
+ if (!t->val)
+ return NULL;
+
+ for (i = 0; i < len; i++, b++) {
+ if (lower)
+ t->val[i] = tolower(*b);
+ else
+ t->val[i] = *b;
+ }
+
+ t->val[len] = '\0';
+
+ /*
+ * Update *p so the caller knows where to continue scanning.
+ */
+ *p = e;
+
+ t->type = T_STRING;
+
+ return t->val;
+}
+
+/*
+ * Populate a keyword token with a type and value.
+ */
+static void get_keyword(struct token *t)
+{
+ int i;
+
+ for (i = 0; keywords[i].val; i++) {
+ if (!strcmp(t->val, keywords[i].val)) {
+ t->type = keywords[i].type;
+ break;
+ }
+ }
+}
+
+/*
+ * Get the next token. We have to keep track of which state we're in to know
+ * if we're looking to get a string literal or a keyword.
+ *
+ * *p is updated to point at the first character after the current token.
+ */
+static void get_token(char **p, struct token *t, enum lex_state state)
+{
+ char *c = *p;
+
+ t->type = T_INVALID;
+
+ /* eat non EOL whitespace */
+ while (isblank(*c))
+ c++;
+
+ /*
+ * eat comments. note that string literals can't begin with #, but
+ * can contain a # after their first character.
+ */
+ if (*c == '#') {
+ while (*c && *c != '\n')
+ c++;
+ }
+
+ if (*c == '\n') {
+ t->type = T_EOL;
+ c++;
+ } else if (*c == '\0') {
+ t->type = T_EOF;
+ c++;
+ } else if (state == L_SLITERAL) {
+ get_string(&c, t, '\n', 0);
+ } else if (state == L_KEYWORD) {
+ /*
+ * when we expect a keyword, we first get the next string
+ * token delimited by whitespace, and then check if it
+ * matches a keyword in our keyword list. if it does, it's
+ * converted to a keyword token of the appropriate type, and
+ * if not, it remains a string token.
+ */
+ get_string(&c, t, ' ', 1);
+ get_keyword(t);
+ }
+
+ *p = c;
+}
+
+/*
+ * Increment *c until we get to the end of the current line, or EOF.
+ */
+static void eol_or_eof(char **c)
+{
+ while (**c && **c != '\n')
+ (*c)++;
+}
+
+/*
+ * All of these parse_* functions share some common behavior.
+ *
+ * They finish with *c pointing after the token they parse, and return 1 on
+ * success, or < 0 on error.
+ */
+
+/*
+ * Parse a string literal and store a pointer it at *dst. String literals
+ * terminate at the end of the line.
+ */
+static int parse_sliteral(char **c, char **dst)
+{
+ struct token t;
+ char *s = *c;
+
+ get_token(c, &t, L_SLITERAL);
+
+ if (t.type != T_STRING) {
+ printf("Expected string literal: %.*s\n", (int)(*c - s), s);
+ return -EINVAL;
+ }
+
+ *dst = t.val;
+
+ return 1;
+}
+
+/*
+ * Parse a base 10 (unsigned) integer and store it at *dst.
+ */
+static int parse_integer(char **c, int *dst)
+{
+ struct token t;
+ char *s = *c;
+
+ get_token(c, &t, L_SLITERAL);
+
+ if (t.type != T_STRING) {
+ printf("Expected string: %.*s\n", (int)(*c - s), s);
+ return -EINVAL;
+ }
+
+ *dst = simple_strtol(t.val, NULL, 10);
+
+ free(t.val);
+
+ return 1;
+}
+
+static int parse_pxefile_top(cmd_tbl_t *cmdtp, char *p, unsigned long base,
+ struct pxe_menu *cfg, int nest_level);
+
+/*
+ * Parse an include statement, and retrieve and parse the file it mentions.
+ *
+ * base should point to a location where it's safe to store the file, and
+ * nest_level should indicate how many nested includes have occurred. For this
+ * include, nest_level has already been incremented and doesn't need to be
+ * incremented here.
+ */
+static int handle_include(cmd_tbl_t *cmdtp, char **c, unsigned long base,
+ struct pxe_menu *cfg, int nest_level)
+{
+ char *include_path;
+ char *s = *c;
+ int err;
+ char *buf;
+ int ret;
+
+ err = parse_sliteral(c, &include_path);
+
+ if (err < 0) {
+ printf("Expected include path: %.*s\n",
+ (int)(*c - s), s);
+ return err;
+ }
+
+ err = get_pxe_file(cmdtp, include_path, base);
+
+ if (err < 0) {
+ printf("Couldn't retrieve %s\n", include_path);
+ return err;
+ }
+
+ buf = map_sysmem(base, 0);
+ ret = parse_pxefile_top(cmdtp, buf, base, cfg, nest_level);
+ unmap_sysmem(buf);
+
+ return ret;
+}
+
+/*
+ * Parse lines that begin with 'menu'.
+ *
+ * base and nest are provided to handle the 'menu include' case.
+ *
+ * base should point to a location where it's safe to store the included file.
+ *
+ * nest_level should be 1 when parsing the top level pxe file, 2 when parsing
+ * a file it includes, 3 when parsing a file included by that file, and so on.
+ */
+static int parse_menu(cmd_tbl_t *cmdtp, char **c, struct pxe_menu *cfg,
+ unsigned long base, int nest_level)
+{
+ struct token t;
+ char *s = *c;
+ int err = 0;
+
+ get_token(c, &t, L_KEYWORD);
+
+ switch (t.type) {
+ case T_TITLE:
+ err = parse_sliteral(c, &cfg->title);
+
+ break;
+
+ case T_INCLUDE:
+ err = handle_include(cmdtp, c, base, cfg,
+ nest_level + 1);
+ break;
+
+ case T_BACKGROUND:
+ err = parse_sliteral(c, &cfg->bmp);
+ break;
+
+ default:
+ printf("Ignoring malformed menu command: %.*s\n",
+ (int)(*c - s), s);
+ }
+
+ if (err < 0)
+ return err;
+
+ eol_or_eof(c);
+
+ return 1;
+}
+
+/*
+ * Handles parsing a 'menu line' when we're parsing a label.
+ */
+static int parse_label_menu(char **c, struct pxe_menu *cfg,
+ struct pxe_label *label)
+{
+ struct token t;
+ char *s;
+
+ s = *c;
+
+ get_token(c, &t, L_KEYWORD);
+
+ switch (t.type) {
+ case T_DEFAULT:
+ if (!cfg->default_label)
+ cfg->default_label = strdup(label->name);
+
+ if (!cfg->default_label)
+ return -ENOMEM;
+
+ break;
+ case T_LABEL:
+ parse_sliteral(c, &label->menu);
+ break;
+ default:
+ printf("Ignoring malformed menu command: %.*s\n",
+ (int)(*c - s), s);
+ }
+
+ eol_or_eof(c);
+
+ return 0;
+}
+
+/*
+ * Handles parsing a 'kernel' label.
+ * expecting "filename" or "<fit_filename>#cfg"
+ */
+static int parse_label_kernel(char **c, struct pxe_label *label)
+{
+ char *s;
+ int err;
+
+ err = parse_sliteral(c, &label->kernel);
+ if (err < 0)
+ return err;
+
+ s = strstr(label->kernel, "#");
+ if (!s)
+ return 1;
+
+ label->config = malloc(strlen(s) + 1);
+ if (!label->config)
+ return -ENOMEM;
+
+ strcpy(label->config, s);
+ *s = 0;
+
+ return 1;
+}
+
+/*
+ * Parses a label and adds it to the list of labels for a menu.
+ *
+ * A label ends when we either get to the end of a file, or
+ * get some input we otherwise don't have a handler defined
+ * for.
+ *
+ */
+static int parse_label(char **c, struct pxe_menu *cfg)
+{
+ struct token t;
+ int len;
+ char *s = *c;
+ struct pxe_label *label;
+ int err;
+
+ label = label_create();
+ if (!label)
+ return -ENOMEM;
+
+ err = parse_sliteral(c, &label->name);
+ if (err < 0) {
+ printf("Expected label name: %.*s\n", (int)(*c - s), s);
+ label_destroy(label);
+ return -EINVAL;
+ }
+
+ list_add_tail(&label->list, &cfg->labels);
+
+ while (1) {
+ s = *c;
+ get_token(c, &t, L_KEYWORD);
+
+ err = 0;
+ switch (t.type) {
+ case T_MENU:
+ err = parse_label_menu(c, cfg, label);
+ break;
+
+ case T_KERNEL:
+ case T_LINUX:
+ err = parse_label_kernel(c, label);
+ break;
+
+ case T_APPEND:
+ err = parse_sliteral(c, &label->append);
+ if (label->initrd)
+ break;
+ s = strstr(label->append, "initrd=");
+ if (!s)
+ break;
+ s += 7;
+ len = (int)(strchr(s, ' ') - s);
+ label->initrd = malloc(len + 1);
+ strncpy(label->initrd, s, len);
+ label->initrd[len] = '\0';
+
+ break;
+
+ case T_INITRD:
+ if (!label->initrd)
+ err = parse_sliteral(c, &label->initrd);
+ break;
+
+ case T_FDT:
+ if (!label->fdt)
+ err = parse_sliteral(c, &label->fdt);
+ break;
+
+ case T_FDTDIR:
+ if (!label->fdtdir)
+ err = parse_sliteral(c, &label->fdtdir);
+ break;
+
+ case T_LOCALBOOT:
+ label->localboot = 1;
+ err = parse_integer(c, &label->localboot_val);
+ break;
+
+ case T_IPAPPEND:
+ err = parse_integer(c, &label->ipappend);
+ break;
+
+ case T_EOL:
+ break;
+
+ default:
+ /*
+ * put the token back! we don't want it - it's the end
+ * of a label and whatever token this is, it's
+ * something for the menu level context to handle.
+ */
+ *c = s;
+ return 1;
+ }
+
+ if (err < 0)
+ return err;
+ }
+}
+
+/*
+ * This 16 comes from the limit pxelinux imposes on nested includes.
+ *
+ * There is no reason at all we couldn't do more, but some limit helps prevent
+ * infinite (until crash occurs) recursion if a file tries to include itself.
+ */
+#define MAX_NEST_LEVEL 16
+
+/*
+ * Entry point for parsing a menu file. nest_level indicates how many times
+ * we've nested in includes. It will be 1 for the top level menu file.
+ *
+ * Returns 1 on success, < 0 on error.
+ */
+static int parse_pxefile_top(cmd_tbl_t *cmdtp, char *p, unsigned long base,
+ struct pxe_menu *cfg, int nest_level)
+{
+ struct token t;
+ char *s, *b, *label_name;
+ int err;
+
+ b = p;
+
+ if (nest_level > MAX_NEST_LEVEL) {
+ printf("Maximum nesting (%d) exceeded\n", MAX_NEST_LEVEL);
+ return -EMLINK;
+ }
+
+ while (1) {
+ s = p;
+
+ get_token(&p, &t, L_KEYWORD);
+
+ err = 0;
+ switch (t.type) {
+ case T_MENU:
+ cfg->prompt = 1;
+ err = parse_menu(cmdtp, &p, cfg,
+ base + ALIGN(strlen(b) + 1, 4),
+ nest_level);
+ break;
+
+ case T_TIMEOUT:
+ err = parse_integer(&p, &cfg->timeout);
+ break;
+
+ case T_LABEL:
+ err = parse_label(&p, cfg);
+ break;
+
+ case T_DEFAULT:
+ case T_ONTIMEOUT:
+ err = parse_sliteral(&p, &label_name);
+
+ if (label_name) {
+ if (cfg->default_label)
+ free(cfg->default_label);
+
+ cfg->default_label = label_name;
+ }
+
+ break;
+
+ case T_INCLUDE:
+ err = handle_include(cmdtp, &p,
+ base + ALIGN(strlen(b), 4), cfg,
+ nest_level + 1);
+ break;
+
+ case T_PROMPT:
+ eol_or_eof(&p);
+ break;
+
+ case T_EOL:
+ break;
+
+ case T_EOF:
+ return 1;
+
+ default:
+ printf("Ignoring unknown command: %.*s\n",
+ (int)(p - s), s);
+ eol_or_eof(&p);
+ }
+
+ if (err < 0)
+ return err;
+ }
+}
+
+/*
+ * Free the memory used by a pxe_menu and its labels.
+ */
+void destroy_pxe_menu(struct pxe_menu *cfg)
+{
+ struct list_head *pos, *n;
+ struct pxe_label *label;
+
+ if (cfg->title)
+ free(cfg->title);
+
+ if (cfg->default_label)
+ free(cfg->default_label);
+
+ list_for_each_safe(pos, n, &cfg->labels) {
+ label = list_entry(pos, struct pxe_label, list);
+
+ label_destroy(label);
+ }
+
+ free(cfg);
+}
+
+/*
+ * Entry point for parsing a pxe file. This is only used for the top level
+ * file.
+ *
+ * Returns NULL if there is an error, otherwise, returns a pointer to a
+ * pxe_menu struct populated with the results of parsing the pxe file (and any
+ * files it includes). The resulting pxe_menu struct can be free()'d by using
+ * the destroy_pxe_menu() function.
+ */
+struct pxe_menu *parse_pxefile(cmd_tbl_t *cmdtp, unsigned long menucfg)
+{
+ struct pxe_menu *cfg;
+ char *buf;
+ int r;
+
+ cfg = malloc(sizeof(struct pxe_menu));
+
+ if (!cfg)
+ return NULL;
+
+ memset(cfg, 0, sizeof(struct pxe_menu));
+
+ INIT_LIST_HEAD(&cfg->labels);
+
+ buf = map_sysmem(menucfg, 0);
+ r = parse_pxefile_top(cmdtp, buf, menucfg, cfg, 1);
+ unmap_sysmem(buf);
+
+ if (r < 0) {
+ destroy_pxe_menu(cfg);
+ return NULL;
+ }
+
+ return cfg;
+}
+
+/*
+ * Converts a pxe_menu struct into a menu struct for use with U-Boot's generic
+ * menu code.
+ */
+static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
+{
+ struct pxe_label *label;
+ struct list_head *pos;
+ struct menu *m;
+ int err;
+ int i = 1;
+ char *default_num = NULL;
+
+ /*
+ * Create a menu and add items for all the labels.
+ */
+ m = menu_create(cfg->title, DIV_ROUND_UP(cfg->timeout, 10),
+ cfg->prompt, label_print, NULL, NULL);
+
+ if (!m)
+ return NULL;
+
+ list_for_each(pos, &cfg->labels) {
+ label = list_entry(pos, struct pxe_label, list);
+
+ sprintf(label->num, "%d", i++);
+ if (menu_item_add(m, label->num, label) != 1) {
+ menu_destroy(m);
+ return NULL;
+ }
+ if (cfg->default_label &&
+ (strcmp(label->name, cfg->default_label) == 0))
+ default_num = label->num;
+
+ }
+
+ /*
+ * After we've created items for each label in the menu, set the
+ * menu's default label if one was specified.
+ */
+ if (default_num) {
+ err = menu_default_set(m, default_num);
+ if (err != 1) {
+ if (err != -ENOENT) {
+ menu_destroy(m);
+ return NULL;
+ }
+
+ printf("Missing default: %s\n", cfg->default_label);
+ }
+ }
+
+ return m;
+}
+
+/*
+ * Try to boot any labels we have yet to attempt to boot.
+ */
+static void boot_unattempted_labels(cmd_tbl_t *cmdtp, struct pxe_menu *cfg)
+{
+ struct list_head *pos;
+ struct pxe_label *label;
+
+ list_for_each(pos, &cfg->labels) {
+ label = list_entry(pos, struct pxe_label, list);
+
+ if (!label->attempted)
+ label_boot(cmdtp, label);
+ }
+}
+
+/*
+ * Boot the system as prescribed by a pxe_menu.
+ *
+ * Use the menu system to either get the user's choice or the default, based
+ * on config or user input. If there is no default or user's choice,
+ * attempted to boot labels in the order they were given in pxe files.
+ * If the default or user's choice fails to boot, attempt to boot other
+ * labels in the order they were given in pxe files.
+ *
+ * If this function returns, there weren't any labels that successfully
+ * booted, or the user interrupted the menu selection via ctrl+c.
+ */
+void handle_pxe_menu(cmd_tbl_t *cmdtp, struct pxe_menu *cfg)
+{
+ void *choice;
+ struct menu *m;
+ int err;
+
+#ifdef CONFIG_CMD_BMP
+ /* display BMP if available */
+ if (cfg->bmp) {
+ if (get_relfile(cmdtp, cfg->bmp, load_addr)) {
+ run_command("cls", 0);
+ bmp_display(load_addr,
+ BMP_ALIGN_CENTER, BMP_ALIGN_CENTER);
+ } else {
+ printf("Skipping background bmp %s for failure\n",
+ cfg->bmp);
+ }
+ }
+#endif
+
+ m = pxe_menu_to_menu(cfg);
+ if (!m)
+ return;
+
+ err = menu_get_choice(m, &choice);
+
+ menu_destroy(m);
+
+ /*
+ * err == 1 means we got a choice back from menu_get_choice.
+ *
+ * err == -ENOENT if the menu was setup to select the default but no
+ * default was set. in that case, we should continue trying to boot
+ * labels that haven't been attempted yet.
+ *
+ * otherwise, the user interrupted or there was some other error and
+ * we give up.
+ */
+
+ if (err == 1) {
+ err = label_boot(cmdtp, choice);
+ if (!err)
+ return;
+ } else if (err != -ENOENT) {
+ return;
+ }
+
+ boot_unattempted_labels(cmdtp, cfg);
+}
diff --git a/cmd/pxe_utils.h b/cmd/pxe_utils.h
new file mode 100644
index 0000000000..65aadc0f4e
--- /dev/null
+++ b/cmd/pxe_utils.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __PXE_UTILS_H
+#define __PXE_UTILS_H
+
+/*
+ * A note on the pxe file parser.
+ *
+ * We're parsing files that use syslinux grammar, which has a few quirks.
+ * String literals must be recognized based on context - there is no
+ * quoting or escaping support. There's also nothing to explicitly indicate
+ * when a label section completes. We deal with that by ending a label
+ * section whenever we see a line that doesn't include.
+ *
+ * As with the syslinux family, this same file format could be reused in the
+ * future for non pxe purposes. The only action it takes during parsing that
+ * would throw this off is handling of include files. It assumes we're using
+ * pxe, and does a tftp download of a file listed as an include file in the
+ * middle of the parsing operation. That could be handled by refactoring it to
+ * take a 'include file getter' function.
+ */
+
+/*
+ * Describes a single label given in a pxe file.
+ *
+ * Create these with the 'label_create' function given below.
+ *
+ * name - the name of the menu as given on the 'menu label' line.
+ * kernel - the path to the kernel file to use for this label.
+ * append - kernel command line to use when booting this label
+ * initrd - path to the initrd to use for this label.
+ * attempted - 0 if we haven't tried to boot this label, 1 if we have.
+ * localboot - 1 if this label specified 'localboot', 0 otherwise.
+ * list - lets these form a list, which a pxe_menu struct will hold.
+ */
+struct pxe_label {
+ char num[4];
+ char *name;
+ char *menu;
+ char *kernel;
+ char *config;
+ char *append;
+ char *initrd;
+ char *fdt;
+ char *fdtdir;
+ int ipappend;
+ int attempted;
+ int localboot;
+ int localboot_val;
+ struct list_head list;
+};
+
+/*
+ * Describes a pxe menu as given via pxe files.
+ *
+ * title - the name of the menu as given by a 'menu title' line.
+ * default_label - the name of the default label, if any.
+ * bmp - the bmp file name which is displayed in background
+ * timeout - time in tenths of a second to wait for a user key-press before
+ * booting the default label.
+ * prompt - if 0, don't prompt for a choice unless the timeout period is
+ * interrupted. If 1, always prompt for a choice regardless of
+ * timeout.
+ * labels - a list of labels defined for the menu.
+ */
+struct pxe_menu {
+ char *title;
+ char *default_label;
+ char *bmp;
+ int timeout;
+ int prompt;
+ struct list_head labels;
+};
+
+extern bool is_pxe;
+
+extern int (*do_getfile)(cmd_tbl_t *cmdtp, const char *file_path,
+ char *file_addr);
+void destroy_pxe_menu(struct pxe_menu *cfg);
+int get_pxe_file(cmd_tbl_t *cmdtp, const char *file_path,
+ unsigned long file_addr);
+int get_pxelinux_path(cmd_tbl_t *cmdtp, const char *file,
+ unsigned long pxefile_addr_r);
+void handle_pxe_menu(cmd_tbl_t *cmdtp, struct pxe_menu *cfg);
+struct pxe_menu *parse_pxefile(cmd_tbl_t *cmdtp, unsigned long menucfg);
+int pxe_ipaddr_paths(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r);
+int pxe_mac_path(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r);
+int pxe_uuid_path(cmd_tbl_t *cmdtp, unsigned long pxefile_addr_r);
+
+#endif /* __PXE_UTILS_H */
--
2.17.1
More information about the U-Boot
mailing list