[U-Boot] [PATCH v4 4/4] ARM: bcm283x: Set memory map at run-time

[matthias.bgg at kernel.org]

From: Matthias Brugger <mbrugger at suse.com>

For bcm283x based on arm64 we also have to change the mm_region.
Add assign this in mach_cpu_init() so we can create now one binary
for RPi3 and RPi4.

Signed-off-by: Matthias Brugger <mbrugger at suse.com>

---

Changes in v4:
- call rpi_update_mem_map only for ARM64
- get rid of struct pdata

Changes in v3: None
Changes in v2:
- Move mem_map out of assembly file
- push mem_map into the .data section
- update the members of mem_map instead of the pointer

 arch/arm/mach-bcm283x/init.c | 92 ++++++++++++++++++++++++++++++++++++
 board/raspberrypi/rpi/rpi.c  | 45 ------------------
 2 files changed, 92 insertions(+), 45 deletions(-)

diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
index b3f3dfabea..6fb41a99b2 100644
--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
@@ -10,6 +10,96 @@
 #include <dm/device.h>
 #include <fdt_support.h>
 
+#ifdef CONFIG_ARM64
+#include <asm/armv8/mmu.h>
+
+static struct mm_region bcm283x_mem_map[] = {
+	{
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x3f000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x3f000000UL,
+		.phys = 0x3f000000UL,
+		.size = 0x01000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+static struct mm_region bcm2711_mem_map[] = {
+	{
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0xfe000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0xfe000000UL,
+		.phys = 0xfe000000UL,
+		.size = 0x01800000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = bcm283x_mem_map;
+
+/*
+ * I/O address space varies on different chip versions.
+ * We set the base address by inspecting the DTB.
+ */
+static const struct udevice_id board_ids[] = {
+	{ .compatible = "brcm,bcm2837", .data = (ulong)&bcm283x_mem_map},
+	{ .compatible = "brcm,bcm2838", .data = (ulong)&bcm2711_mem_map},
+	{ .compatible = "brcm,bcm2711", .data = (ulong)&bcm2711_mem_map},
+	{ },
+};
+
+static void _rpi_update_mem_map(struct mm_region *pd)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		mem_map[i].virt = pd[i].virt;
+		mem_map[i].phys = pd[i].phys;
+		mem_map[i].size = pd[i].size;
+		mem_map[i].attrs = pd[i].attrs;
+	}
+}
+
+static void rpi_update_mem_map(void)
+{
+	int ret;
+	struct mm_region *mm;
+	const struct udevice_id *of_match = board_ids;
+
+	while (of_match->compatible) {
+		ret = fdt_node_check_compatible(gd->fdt_blob, 0,
+						of_match->compatible);
+		if (!ret) {
+			mm = (struct mm_region *)of_match->data;
+			_rpi_update_mem_map(mm);
+			break;
+		}
+
+		of_match++;
+	}
+}
+#else
+static void rpi_update_mem_map(void) {}
+#endif
+
 unsigned long rpi_bcm283x_base = 0x3f000000;
 
 int arch_cpu_init(void)
@@ -24,6 +114,8 @@ int mach_cpu_init(void)
 	int ret, soc_offset;
 	u64 io_base, size;
 
+	rpi_update_mem_map();
+
 	/* Get IO base from device tree */
 	soc_offset = fdt_path_offset(gd->fdt_blob, "/soc");
 	if (soc_offset < 0)
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index e84a1db14a..3d4afaf653 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -251,51 +251,6 @@ static uint32_t rev_scheme;
 static uint32_t rev_type;
 static const struct rpi_model *model;
 
-#ifdef CONFIG_ARM64
-#ifndef CONFIG_BCM2711
-static struct mm_region bcm283x_mem_map[] = {
-	{
-		.virt = 0x00000000UL,
-		.phys = 0x00000000UL,
-		.size = 0x3f000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	}, {
-		.virt = 0x3f000000UL,
-		.phys = 0x3f000000UL,
-		.size = 0x01000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
-			 PTE_BLOCK_NON_SHARE |
-			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	}, {
-		/* List terminator */
-		0,
-	}
-};
-#else
-static struct mm_region bcm283x_mem_map[] = {
-	{
-		.virt = 0x00000000UL,
-		.phys = 0x00000000UL,
-		.size = 0xfe000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	}, {
-		.virt = 0xfe000000UL,
-		.phys = 0xfe000000UL,
-		.size = 0x01800000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
-			 PTE_BLOCK_NON_SHARE |
-			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	}, {
-		/* List terminator */
-		0,
-	}
-};
-#endif
-struct mm_region *mem_map = bcm283x_mem_map;
-#endif
-
 int dram_init(void)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1);
-- 
2.24.0