[U-Boot] [EXT] [PATCH v2 2/2] arm: ls1028a: use the new flexspi driver

[Kuldeep Singh]

Hi Michael,

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Michael Walle
> Sent: Saturday, November 2, 2019 11:56 PM
> To: u-boot at lists.denx.de
> Subject: [EXT] [U-Boot] [PATCH v2 2/2] arm: ls1028a: use the new flexspi
> driver
> 
> Caution: EXT Email
> 
> Also align the fspi node with the kernel one. There is actually no driver which
> would match "nxp,dn-fspi".
> 
> Signed-off-by: Michael Walle <michael at walle.cc>
> ---
> changes since v1:
>  - none
> 
>  arch/arm/dts/fsl-ls1028a.dtsi | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index
> 43a154e8e7..774e477542 100644
> --- a/arch/arm/dts/fsl-ls1028a.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a.dtsi
> @@ -49,14 +49,16 @@
>                              <1 10 0x8>; /* Hypervisor PPI, active-low */
>         };
> 
> -       fspi: flexspi at 20C0000 {
> -               compatible = "nxp,dn-fspi";
> +       fspi: flexspi at 20c0000 {
> +               compatible = "nxp,lx2160a-fspi";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> -               reg = <0x0 0x20C0000 0x0 0x10000>,
> -                       <0x0 0x20000000 0x0 0x10000000>; /*64MB flash*/
> -               reg-names = "FSPI", "FSPI-memory";
> -               num-cs = <1>;
> +               reg = <0x0 0x20c0000 0x0 0x10000>,
> +                     <0x0 0x20000000 0x0 0x10000000>;
> +               reg-names = "fspi_base", "fspi_mmap";
> +               clocks = <&clockgen 4 3>, <&clockgen 4 3>;
> +               clock-names = "fspi_en", "fspi";
> +               interrupts = <0 25 0x4>;

Please change the interrupts to "<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>" as it avoids magic numbers.

Reviewed-by: Kuldeep Singh <kuldeep.singh at nxp.com>

>                 status = "disabled";
>         };
> 
> --
> 2.20.1