[U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a and ls2080a EP mode

[Xiaowei Bao]

Due to the ls2085a and ls2080a use difference way to set the BAR size,
so add the BAR size init code here.

Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
depends on: http://patchwork.ozlabs.org/project/uboot/list/?series=108172&state=*
---
 drivers/pci/pcie_layerscape.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index 05e6b62..845efda 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -467,18 +467,25 @@ static void ls_pcie_setup_ep(struct ls_pcie *pcie)
 			 */
 			writel(0, pcie->dbi + PCIE_MISC_CONTROL_1_OFF);
 
+			bar_base = pcie->dbi +
+				   PCIE_MASK_OFFSET(pcie->cfg2_flag, pf);
+
 			if (pcie->cfg2_flag) {
-				for (vf = 0; vf <= PCIE_VF_NUM; vf++) {
+				ctrl_writel(pcie,
+					    PCIE_LCTRL0_VAL(pf, 0),
+					    PCIE_PF_VF_CTRL);
+				ls_pcie_ep_setup_bars(bar_base);
+
+				for (vf = 1; vf <= PCIE_VF_NUM; vf++) {
 					ctrl_writel(pcie,
 						    PCIE_LCTRL0_VAL(pf, vf),
 						    PCIE_PF_VF_CTRL);
+					ls_pcie_ep_setup_vf_bars(bar_base);
 				}
+			} else {
+				ls_pcie_ep_setup_bars(bar_base);
+				ls_pcie_ep_setup_vf_bars(bar_base);
 			}
-			bar_base = pcie->dbi +
-				   PCIE_MASK_OFFSET(pcie->cfg2_flag, pf);
-			ls_pcie_ep_setup_bars(bar_base);
-			ls_pcie_ep_setup_vf_bars(bar_base);
-
 			ls_pcie_ep_setup_atu(pcie, pf);
 		}
 
-- 
2.9.5