[U-Boot] [PATCH] fdt: fix bcm283x dm-pre-reloc definitions

Matthias Brugger mbrugger at suse.com
Thu Nov 7 16:37:33 UTC 2019



On 07/11/2019 14:51, Tom Rini wrote:
> On Thu, Nov 07, 2019 at 02:30:13PM +0100, matthias.bgg at kernel.org wrote:
> 
>> From: Matthias Brugger <mbrugger at suse.com>
>>
>> In commmit
>> 143256b353 ("fdt: update bcm283x device tree sources to Linux 5.1-rc6 state")
>> we accidently deleted the inclution of bcm283x-uboot.dtsi which
>> marks, soc, uarts and pincontroller as dm-pre-reloc
>>
>> Without this definitions the first call to
>> bcm283x_mu_serial_ofdata_to_platdata() fails as the pins are not set
>> correctly. As a result the U-Boot banner isn't shown on boot.
>>
>> Reported-by: Tom Rini <trini at konsulko.com>
>> Reported-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
>> Signed-off-by: Matthias Brugger <mbrugger at suse.com>
>>
>> ---
>>
>>  arch/arm/dts/bcm283x.dtsi | 4 +++-
>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/dts/bcm283x.dtsi b/arch/arm/dts/bcm283x.dtsi
>> index 9777644c6c..39d7bd600e 100644
>> --- a/arch/arm/dts/bcm283x.dtsi
>> +++ b/arch/arm/dts/bcm283x.dtsi
>> @@ -51,7 +51,7 @@
>>  		};
>>  	};
>>  
>> -	soc {
>> +	soc: soc {
>>  		compatible = "simple-bus";
>>  		#address-cells = <1>;
>>  		#size-cells = <1>;
> 
> Is that part needed?
> 

I verified that this is not needed.
Will update in v2.

>> @@ -675,3 +675,5 @@
>>  		#phy-cells = <0>;
>>  	};
>>  };
>> +
>> +#include "bcm283x-uboot.dtsi"
> 
> This means one of the general rules we have in:
> u_boot_dtsi_options = $(strip $(wildcard $(dir $<)$(basename $(notdir $<))-u-boot.dtsi) \
>         $(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_SOC))-u-boot.dtsi) \
>         $(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_CPU))-u-boot.dtsi) \
>         $(wildcard $(dir $<)$(subst $\",,$(CONFIG_SYS_VENDOR))-u-boot.dtsi) \
>         $(wildcard $(dir $<)u-boot.dtsi))
> 
> isn't being hit and we should probably rename the file (or set
> CONFIG_SYS_SOC differently?).
> 

Good catch. I'll send a v2 which fixes this by renaming the file.

Regards,
Matthias


More information about the U-Boot mailing list