[U-Boot] [RESEND PATCH 08/10] board: ge: pass rtc_status via device tree
Robert Beckett
bob.beckett at collabora.com
Tue Nov 12 19:15:18 UTC 2019
From: Ian Ray <ian.ray at ge.com>
Pass rtc_status via the device tree, instead of on kernel command line.
Additionally, the 2038 mitigation is reported, if applied successfully.
Signed-off-by: Ian Ray <ian.ray at ge.com>
Signed-off-by: Robert Beckett <bob.beckett at collabora.com>
---
board/ge/bx50v3/bx50v3.c | 7 ++++++-
board/ge/common/ge_common.c | 20 +++++++++++++-------
board/ge/mx53ppd/mx53ppd.c | 7 ++++++-
include/configs/ge_bx50v3.h | 2 +-
include/configs/mx53ppd.h | 2 +-
5 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 05fa792ed8..ea2564ecf3 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -648,8 +648,13 @@ int checkboard(void)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
+ char *rtc_status = env_get("rtc_status");
+
fdt_setprop(blob, 0, "ge,boot-ver", version_string,
- strlen(version_string) + 1);
+ strlen(version_string) + 1);
+
+ fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
+ strlen(rtc_status) + 1);
return 0;
}
#endif
diff --git a/board/ge/common/ge_common.c b/board/ge/common/ge_common.c
index 501c8b2daf..d7e21deca7 100644
--- a/board/ge/common/ge_common.c
+++ b/board/ge/common/ge_common.c
@@ -17,8 +17,10 @@ void check_time(void)
unsigned int current_i2c_bus = i2c_get_bus_num();
ret = i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
- if (ret < 0)
+ if (ret < 0) {
+ env_set("rtc_status", "FAIL");
return;
+ }
rtc_init();
@@ -28,10 +30,7 @@ void check_time(void)
break;
}
- if (ret < 0)
- env_set("rtc_status", "RTC_ERROR");
-
- if (tm.tm_year > 2037) {
+ if (!ret && tm.tm_year > 2037) {
tm.tm_sec = 0;
tm.tm_min = 0;
tm.tm_hour = 0;
@@ -46,10 +45,17 @@ void check_time(void)
break;
}
- if (ret < 0)
- env_set("rtc_status", "RTC_ERROR");
+ if (ret >= 0)
+ ret = 2038;
}
+ if (ret < 0)
+ env_set("rtc_status", "FAIL");
+ else if (ret == 2038)
+ env_set("rtc_status", "2038");
+ else
+ env_set("rtc_status", "OK");
+
i2c_set_bus_num(current_i2c_bus);
}
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 5448567298..b4d08a11ee 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -313,8 +313,13 @@ int checkboard(void)
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
+ char *rtc_status = env_get("rtc_status");
+
fdt_setprop(blob, 0, "ge,boot-ver", version_string,
- strlen(version_string) + 1);
+ strlen(version_string) + 1);
+
+ fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
+ strlen(rtc_status) + 1);
return 0;
}
#endif
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index d572424831..7c26608aa7 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -93,7 +93,7 @@
"setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
"ro rootwait cma=128M " \
"bootcause=${bootcause} " \
- "${quiet} console=${console} ${rtc_status} " \
+ "${quiet} console=${console} " \
"${videoargs}" "\0" \
"doquiet=" \
"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index 59988efc9b..26e4b729bb 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -101,7 +101,7 @@
"lvds=ldb\0" \
"setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
- "console=${console} ${rtc_status}\0" \
+ "console=${console}\0" \
"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
"rootwait ${bootargs}\0" \
"doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
--
2.20.1
More information about the U-Boot
mailing list