[U-Boot] [PATCH 4/4] boards/km_arm: enable support for Macronix SPI NOR flash

[Stefan Roese]

On 25.11.19 17:24, Holger Brunck wrote:
> The M25P80 and M25P32 SPI flashes from Numonix/Micron
> will be replaced by Marconix MX25L80 and MX25L32 flashes.
> 
> Signed-off-by: Holger Brunck <holger.brunck at ch.abb.com>
> CC: Stefan Roese <sr at denx.de>
> CC: Valentin Longchamp <valentin.longchamp at ch.abb.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   configs/km_kirkwood_128m16_defconfig | 1 +
>   configs/km_kirkwood_defconfig        | 1 +
>   configs/kmcoge5un_defconfig          | 1 +
>   configs/kmnusa_defconfig             | 1 +
>   4 files changed, 4 insertions(+)
> 
> diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig
> index 73b4054dcc..c05b789897 100644
> --- a/configs/km_kirkwood_128m16_defconfig
> +++ b/configs/km_kirkwood_128m16_defconfig
> @@ -42,6 +42,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
>   # CONFIG_MMC is not set
>   CONFIG_SF_DEFAULT_SPEED=8100000
>   CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_MVGBE=y
>   CONFIG_MII=y
>   CONFIG_SYS_NS16550=y
> diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig
> index ea8af60fa5..a17cfdd92c 100644
> --- a/configs/km_kirkwood_defconfig
> +++ b/configs/km_kirkwood_defconfig
> @@ -42,6 +42,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
>   # CONFIG_MMC is not set
>   CONFIG_SF_DEFAULT_SPEED=8100000
>   CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_MVGBE=y
>   CONFIG_MII=y
>   CONFIG_SYS_NS16550=y
> diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig
> index f2c835029a..a44df06e1b 100644
> --- a/configs/kmcoge5un_defconfig
> +++ b/configs/kmcoge5un_defconfig
> @@ -46,6 +46,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
>   # CONFIG_MMC is not set
>   CONFIG_SF_DEFAULT_SPEED=8100000
>   CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_MVGBE=y
>   CONFIG_MII=y
>   CONFIG_SYS_NS16550=y
> diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig
> index 0b5a0e4e22..ffd8cb03f9 100644
> --- a/configs/kmnusa_defconfig
> +++ b/configs/kmnusa_defconfig
> @@ -46,6 +46,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
>   # CONFIG_MMC is not set
>   CONFIG_SF_DEFAULT_SPEED=8100000
>   CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_MACRONIX=y
>   CONFIG_MV88E6352_SWITCH=y
>   CONFIG_MVGBE=y
>   CONFIG_MII=y
> 

Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de