[U-Boot] [PATCH 27/42] board: freescale: ls1046afrwy: support dm_i2c_* API

[Biwen Li]

This supports dm_i2c_* API to
fix compilation error when enabled
CONFIG_DM_I2C as follows:
	- board/freescale/ls1046afrwy/built-in.o: In function `select_i2c_ch_pca9547:
	  board/freescale/ls1046afrwy/ls1046afrwy.c:42: undefined reference to `i2c_write'`

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
 board/freescale/ls1046afrwy/ls1046afrwy.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c
index ac2f8ee436..4a9189b3ee 100644
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@@ -35,11 +35,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -144,7 +157,7 @@ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 	sec_init();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	return 0;
 }
 
-- 
2.17.1