[U-Boot] [PATCH 1/2] arm: dts: rk3399-rockpro64: sync dts from linux kernel

[Soeren Moch]

On 08.11.19 09:45, Soeren Moch wrote:
> On 08.11.19 04:22, Kever Yang wrote:
>> On 2019/11/7 下午7:11, Soeren Moch wrote:
>>> The most important change for u-boot is the fix for the vdd-log pwm
>>> voltage regulator to avoid overvoltage for the VD_LOGIC power domain.
>>>
>>> Signed-off-by: Soeren Moch <smoch at web.de>
>>> =2D--
>>> Cc: Kever Yang <kever.yang at rock-chips.com>
>>> Cc: u-boot at lists.denx.de
>>> =2D--
>> Why  is the "=2D- -" here?
> 'git send-email' encodes the patch this way. I use git version 2.17.1 .
> Apparently this this done to avoid problems with MTAs, I also saw 'From'
> in a patch description encoded in this special way.
> Seems to be no problem for other tools, e.g. u-boot patchwork converts
> this back to the more traditional readable form.
>
> I'm not sure what I should do about this, seems to be more a feature
> than a bug.
Apparently 'git send-email' changed the default transfer encoding from
unspecified 8bit to quoted-printable.
Do you want me to resend these patches with simpler transfer encoding,
e.g. 7bit?

Thanks,
Soeren
>> Otherwise looks good to me.
>>
>>
>> Reviewed-by: Kever Yang<kever.yang at rock-chips.com>
> Thanks,
> Soeren
>> Thanks,
>> - Kever
>>
>>>   arch/arm/dts/rk3399-rockpro64.dts | 57 ++++++++++++++++++++++++++-----
>>>   1 file changed, 49 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/arch/arm/dts/rk3399-rockpro64.dts
>>> b/arch/arm/dts/rk3399-rockp=
>>> ro64.dts
>>> index 1f2394e058..e544deb61d 100644
>>> =2D-- a/arch/arm/dts/rk3399-rockpro64.dts
>>> +++ b/arch/arm/dts/rk3399-rockpro64.dts
>>> @@ -58,6 +58,13 @@
>>>           };
>>>       };
>>>
>>> +    fan: pwm-fan {
>>> +        compatible =3D "pwm-fan";
>>> +        #cooling-cells =3D <2>;
>>> +        fan-supply =3D <&vcc12v_dcin>;
>>> +        pwms =3D <&pwm1 0 50000 0>;
>>> +    };
>>> +
>>>       sdio_pwrseq: sdio-pwrseq {
>>>           compatible =3D "mmc-pwrseq-simple";
>>>           clocks =3D <&rk808 1>;
>>> @@ -166,7 +173,7 @@
>>>           regulator-always-on;
>>>           regulator-boot-on;
>>>           regulator-min-microvolt =3D <800000>;
>>> -        regulator-max-microvolt =3D <1400000>;
>>> +        regulator-max-microvolt =3D <1700000>;
>>>           vin-supply =3D <&vcc5v0_sys>;
>>>       };
>>>   };
>>> @@ -222,6 +229,10 @@
>>>       status =3D "okay";
>>>   };
>>>
>>> +&hdmi_sound {
>>> +    status =3D "okay";
>>> +};
>>> +
>>>   &gpu {
>>>       mali-supply =3D <&vdd_gpu>;
>>>       status =3D "okay";
>>> @@ -236,8 +247,8 @@
>>>       rk808: pmic at 1b {
>>>           compatible =3D "rockchip,rk808";
>>>           reg =3D <0x1b>;
>>> -        interrupt-parent =3D <&gpio1>;
>>> -        interrupts =3D <21 IRQ_TYPE_LEVEL_LOW>;
>>> +        interrupt-parent =3D <&gpio3>;
>>> +        interrupts =3D <10 IRQ_TYPE_LEVEL_LOW>;
>>>           #clock-cells =3D <1>;
>>>           clock-output-names =3D "xin32k", "rk808-clkout2";
>>>           pinctrl-names =3D "default";
>>> @@ -504,11 +515,25 @@
>>>       status =3D "okay";
>>>
>>>       bt656-supply =3D <&vcc1v8_dvp>;
>>> -    audio-supply =3D <&vcca1v8_codec>;
>>> +    audio-supply =3D <&vcc_3v0>;
>>>       sdmmc-supply =3D <&vcc_sdio>;
>>>       gpio1830-supply =3D <&vcc_3v0>;
>>>   };
>>>
>>> +&pcie0 {
>>> +    ep-gpios =3D <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
>>> +    num-lanes =3D <4>;
>>> +    pinctrl-names =3D "default";
>>> +    pinctrl-0 =3D <&pcie_perst>;
>>> +    vpcie12v-supply =3D <&vcc12v_dcin>;
>>> +    vpcie3v3-supply =3D <&vcc3v3_pcie>;
>>> +    status =3D "okay";
>>> +};
>>> +
>>> +&pcie_phy {
>>> +    status =3D "okay";
>>> +};
>>> +
>>>   &pmu_io_domains {
>>>       pmu1830-supply =3D <&vcc_3v0>;
>>>       status =3D "okay";
>>> @@ -538,6 +563,10 @@
>>>       };
>>>
>>>       pcie {
>>> +        pcie_perst: pcie-perst {
>>> +            rockchip,pins =3D <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
>>> +        };
>>> +
>>>           pcie_pwr_en: pcie-pwr-en {
>>>               rockchip,pins =3D <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
>>>           };
>>> @@ -545,7 +574,7 @@
>>>
>>>       pmic {
>>>           pmic_int_l: pmic-int-l {
>>> -            rockchip,pins =3D <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
>>> +            rockchip,pins =3D <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
>>>           };
>>>
>>>           vsel1_gpio: vsel1-gpio {
>>> @@ -580,6 +609,10 @@
>>>       status =3D "okay";
>>>   };
>>>
>>> +&pwm1 {
>>> +    status =3D "okay";
>>> +};
>>> +
>>>   &pwm2 {
>>>       status =3D "okay";
>>>   };
>>> @@ -591,7 +624,6 @@
>>>
>>>   &sdmmc {
>>>       bus-width =3D <4>;
>>> -    cap-mmc-highspeed;
>>>       cap-sd-highspeed;
>>>       cd-gpios =3D <&gpio0 7 GPIO_ACTIVE_LOW>;
>>>       disable-wp;
>>> @@ -603,12 +635,21 @@
>>>
>>>   &sdhci {
>>>       bus-width =3D <8>;
>>> -    mmc-hs400-1_8v;
>>> -    mmc-hs400-enhanced-strobe;
>>> +    mmc-hs200-1_8v;
>>>       non-removable;
>>>       status =3D "okay";
>>>   };
>>>
>>> +&spi1 {
>>> +    status =3D "okay";
>>> +
>>> +    flash at 0 {
>>> +        compatible =3D "jedec,spi-nor";
>>> +        reg =3D <0>;
>>> +        spi-max-frequency =3D <10000000>;
>>> +    };
>>> +};
>>> +
>>>   &tcphy0 {
>>>       status =3D "okay";
>>>   };
>>> =2D-
>>> 2.17.1
>>>
>>>
>>