[U-Boot] [V3 1/2] ata: fsl_sata: Add DM support for Freescale PowerPC SATA driver
Peng Ma
peng.ma at nxp.com
Tue Nov 19 06:17:36 UTC 2019
Add DM support for Freescale PowerPC sata driver used for PowerPC T series
SoCs,
CONFIG_BLK needs to be enabled on these platforms. It adds the SATA
controller as AHCI device, which is strictly speaking not correct,
as the controller is not AHCI compatible, But the U-Boot AHCI uclass
interface enables the usage of this DM driver,
Also fix below warning while PowerPC T series boards compilation,
===================== WARNING ======================"
This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
enabled. Please update the storage controller driver to use"
CONFIG_AHCI before the v2019.07 release."
Failure to update by the deadline may result in board removal."
See doc/driver-model/MIGRATION.txt for more info."
===================================================="
Signed-off-by: Peng Ma <peng.ma at nxp.com>
---
Changed for v3:
- Limitd the title for maximum 75 chars per line
arch/powerpc/cpu/mpc85xx/cpu_init.c | 10 --
drivers/ata/Kconfig | 1 +
drivers/ata/fsl_sata.c | 307 ++++++++++++++++++++++++++----------
drivers/ata/fsl_sata.h | 13 +-
4 files changed, 233 insertions(+), 98 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index cac9280..9c12c87 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -1023,16 +1023,6 @@ void arch_preboot_os(void)
mtmsr(msr);
}
-#if defined(CONFIG_SATA) && defined(CONFIG_FSL_SATA)
-int sata_initialize(void)
-{
- if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
- return __sata_initialize();
-
- return 1;
-}
-#endif
-
void cpu_secondary_init_r(void)
{
#ifdef CONFIG_U_QE
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 87636ae..57121f6 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -87,6 +87,7 @@ config DWC_AHSATA_AHCI
config FSL_SATA
bool "Enable Freescale SATA controller driver support"
select LIBATA
+ select AHCI if BLK
help
Enable this driver to support the SATA controller found in
some Freescale PowerPC SoCs.
diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c
index e70a515..3261c10 100644
--- a/drivers/ata/fsl_sata.c
+++ b/drivers/ata/fsl_sata.c
@@ -1,7 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu at freescale.com>
+ * Copyright 2019 NXP
+ * Author: Dave Liu <daveliu at freescale.com>
*/
#include <common.h>
@@ -16,6 +17,11 @@
#include <sata.h>
#include "fsl_sata.h"
+#if CONFIG_IS_ENABLED(BLK)
+#include <dm.h>
+#include <ahci.h>
+#include <blk.h>
+#else
#ifndef CONFIG_SYS_SATA1_FLAGS
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#endif
@@ -35,6 +41,7 @@ static struct fsl_sata_info fsl_sata_info[] = {
{0, 0},
#endif
};
+#endif
static inline void sdelay(unsigned long sec)
{
@@ -74,7 +81,11 @@ static int ata_wait_register(unsigned __iomem *addr, u32 mask,
return (i < timeout_msec) ? 0 : -1;
}
+#if !CONFIG_IS_ENABLED(BLK)
int init_sata(int dev)
+#else
+static int init_sata(struct fsl_ata_priv *priv, int dev)
+#endif
{
u32 length, align;
cmd_hdr_tbl_t *cmd_hdr;
@@ -110,13 +121,18 @@ int init_sata(int dev)
/* Zero all of the device driver struct */
memset((void *)sata, 0, sizeof(fsl_sata_t));
- /* Save the private struct to block device struct */
- sata_dev_desc[dev].priv = (void *)sata;
-
- snprintf(sata->name, 12, "SATA%d", dev);
+ snprintf(sata->name, 12, "SATA%d:\n", dev);
/* Set the controller register base address to device struct */
+#if !CONFIG_IS_ENABLED(BLK)
+ sata_dev_desc[dev].priv = (void *)sata;
reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
+ sata->dma_flag = fsl_sata_info[dev].flags;
+#else
+ reg = (fsl_sata_reg_t *)(priv->base + priv->offset * dev);
+ sata->dma_flag = priv->flag;
+ priv->fsl_sata = sata;
+#endif
sata->reg_base = reg;
/* Allocate the command header table, 4 bytes aligned */
@@ -479,34 +495,16 @@ static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
return -1;
}
-static void fsl_sata_identify(int dev, u16 *id)
-{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
- struct sata_fis_h2d h2d, *cfis = &h2d;
-
- memset(cfis, 0, sizeof(struct sata_fis_h2d));
-
- cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
- cfis->pm_port_c = 0x80; /* is command */
- cfis->command = ATA_CMD_ID_ATA;
-
- fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
- ata_swap_buf_le16(id, ATA_ID_WORDS);
-}
-
-static void fsl_sata_xfer_mode(int dev, u16 *id)
+static void fsl_sata_xfer_mode(fsl_sata_t *sata, u16 *id)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
-
sata->pio = id[ATA_ID_PIO_MODES];
sata->mwdma = id[ATA_ID_MWDMA_MODES];
sata->udma = id[ATA_ID_UDMA_MODES];
debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
}
-static void fsl_sata_set_features(int dev)
+static void fsl_sata_set_features(fsl_sata_t *sata)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
u8 udma_cap;
@@ -533,9 +531,9 @@ static void fsl_sata_set_features(int dev)
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
}
-static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
+static u32 fsl_sata_rw_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt, u8 *buffer,
+ int is_write)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
u32 block;
@@ -558,9 +556,8 @@ static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_wr
return blkcnt;
}
-static void fsl_sata_flush_cache(int dev)
+static void fsl_sata_flush_cache(fsl_sata_t *sata)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
@@ -572,9 +569,9 @@ static void fsl_sata_flush_cache(int dev)
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
}
-static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
+static u32 fsl_sata_rw_cmd_ext(fsl_sata_t *sata, u32 start, u32 blkcnt,
+ u8 *buffer, int is_write)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
u64 block;
@@ -602,10 +599,9 @@ static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int i
return blkcnt;
}
-static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
- int is_write)
+static u32 fsl_sata_rw_ncq_cmd(fsl_sata_t *sata, u32 start, u32 blkcnt,
+ u8 *buffer, int is_write)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
int ncq_channel;
u64 block;
@@ -646,9 +642,8 @@ static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
return blkcnt;
}
-static void fsl_sata_flush_cache_ext(int dev)
+static void fsl_sata_flush_cache_ext(fsl_sata_t *sata)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
@@ -660,10 +655,8 @@ static void fsl_sata_flush_cache_ext(int dev)
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
}
-static void fsl_sata_init_wcache(int dev, u16 *id)
+static void fsl_sata_init_wcache(fsl_sata_t *sata, u16 *id)
{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
-
if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
sata->wcache = 1;
if (ata_id_has_flush(id))
@@ -672,26 +665,8 @@ static void fsl_sata_init_wcache(int dev, u16 *id)
sata->flush_ext = 1;
}
-static int fsl_sata_get_wcache(int dev)
-{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
- return sata->wcache;
-}
-
-static int fsl_sata_get_flush(int dev)
-{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
- return sata->flush;
-}
-
-static int fsl_sata_get_flush_ext(int dev)
-{
- fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
- return sata->flush_ext;
-}
-
-static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
- const void *buffer, int is_write)
+static u32 ata_low_level_rw_lba48(fsl_sata_t *sata, u32 blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
{
u32 start, blks;
u8 *addr;
@@ -704,18 +679,22 @@ static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
max_blks = ATA_MAX_SECTORS_LBA48;
do {
if (blks > max_blks) {
- if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
- fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write);
+ if (sata->dma_flag != FLAGS_FPDMA)
+ fsl_sata_rw_cmd_ext(sata, start, max_blks, addr,
+ is_write);
else
- fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write);
+ fsl_sata_rw_ncq_cmd(sata, start, max_blks, addr,
+ is_write);
start += max_blks;
blks -= max_blks;
addr += ATA_SECT_SIZE * max_blks;
} else {
- if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
- fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write);
+ if (sata->dma_flag != FLAGS_FPDMA)
+ fsl_sata_rw_cmd_ext(sata, start, blks, addr,
+ is_write);
else
- fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write);
+ fsl_sata_rw_ncq_cmd(sata, start, blks, addr,
+ is_write);
start += blks;
blks = 0;
addr += ATA_SECT_SIZE * blks;
@@ -725,7 +704,7 @@ static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
return blkcnt;
}
-static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
+static u32 ata_low_level_rw_lba28(fsl_sata_t *sata, u32 blknr, u32 blkcnt,
const void *buffer, int is_write)
{
u32 start, blks;
@@ -739,12 +718,12 @@ static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
max_blks = ATA_MAX_SECTORS;
do {
if (blks > max_blks) {
- fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write);
+ fsl_sata_rw_cmd(sata, start, max_blks, addr, is_write);
start += max_blks;
blks -= max_blks;
addr += ATA_SECT_SIZE * max_blks;
} else {
- fsl_sata_rw_cmd(dev, start, blks, addr, is_write);
+ fsl_sata_rw_cmd(sata, start, blks, addr, is_write);
start += blks;
blks = 0;
addr += ATA_SECT_SIZE * blks;
@@ -757,38 +736,81 @@ static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
/*
* SATA interface between low level driver and command layer
*/
+#if !CONFIG_IS_ENABLED(BLK)
ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
{
- u32 rc;
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+#else
+static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
+ void *buffer)
+{
+ struct fsl_ata_priv *priv = dev_get_platdata(dev);
+ fsl_sata_t *sata = priv->fsl_sata;
+#endif
+ u32 rc;
if (sata->lba48)
- rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
+ rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
+ READ_CMD);
else
- rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
+ rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
+ READ_CMD);
return rc;
}
+#if !CONFIG_IS_ENABLED(BLK)
ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
{
- u32 rc;
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+#else
+static ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
+ const void *buffer)
+{
+ struct fsl_ata_priv *priv = dev_get_platdata(dev);
+ fsl_sata_t *sata = priv->fsl_sata;
+#endif
+ u32 rc;
if (sata->lba48) {
- rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
- if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev))
- fsl_sata_flush_cache_ext(dev);
+ rc = ata_low_level_rw_lba48(sata, blknr, blkcnt, buffer,
+ WRITE_CMD);
+ if (sata->wcache && sata->flush_ext)
+ fsl_sata_flush_cache_ext(sata);
} else {
- rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
- if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev))
- fsl_sata_flush_cache(dev);
+ rc = ata_low_level_rw_lba28(sata, blknr, blkcnt, buffer,
+ WRITE_CMD);
+ if (sata->wcache && sata->flush)
+ fsl_sata_flush_cache(sata);
}
return rc;
}
+static void fsl_sata_identify(fsl_sata_t *sata, u16 *id)
+{
+ struct sata_fis_h2d h2d, *cfis = &h2d;
+
+ memset(cfis, 0, sizeof(struct sata_fis_h2d));
+
+ cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ cfis->pm_port_c = 0x80; /* is command */
+ cfis->command = ATA_CMD_ID_ATA;
+
+ fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+}
+
+#if !CONFIG_IS_ENABLED(BLK)
int scan_sata(int dev)
{
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
+#else
+static int scan_sata(struct udevice *dev)
+{
+ struct blk_desc *desc = dev_get_uclass_platdata(dev);
+ struct fsl_ata_priv *priv = dev_get_platdata(dev);
+ fsl_sata_t *sata = priv->fsl_sata;
+#endif
+
unsigned char serial[ATA_ID_SERNO_LEN + 1];
unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
unsigned char product[ATA_ID_PROD_LEN + 1];
@@ -806,23 +828,19 @@ int scan_sata(int dev)
}
/* Identify device to get information */
- fsl_sata_identify(dev, id);
+ fsl_sata_identify(sata, id);
/* Serial number */
ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
- memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
/* Firmware version */
ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
- memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
/* Product model */
ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
- memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
/* Totoal sectors */
n_sectors = ata_id_n_sectors(id);
- sata_dev_desc[dev].lba = (u32)n_sectors;
#ifdef CONFIG_LBA48
/* Check if support LBA48 */
@@ -833,21 +851,136 @@ int scan_sata(int dev)
debug("Device supports LBA28\n\r");
#endif
+#if !CONFIG_IS_ENABLED(BLK)
+ memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
+ memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
+ memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
+ sata_dev_desc[dev].lba = (u32)n_sectors;
+#ifdef CONFIG_LBA48
+ sata_dev_desc[dev].lba48 = sata->lba48;
+#endif
+#else
+ memcpy(desc->product, serial, sizeof(serial));
+ memcpy(desc->revision, firmware, sizeof(firmware));
+ memcpy(desc->vendor, product, sizeof(product));
+ desc->lba = n_sectors;
+#ifdef CONFIG_LBA48
+ desc->lba48 = sata->lba48;
+#endif
+#endif
+
/* Get the NCQ queue depth from device */
sata->queue_depth = ata_id_queue_depth(id);
/* Get the xfer mode from device */
- fsl_sata_xfer_mode(dev, id);
+ fsl_sata_xfer_mode(sata, id);
/* Get the write cache status from device */
- fsl_sata_init_wcache(dev, id);
+ fsl_sata_init_wcache(sata, id);
/* Set the xfer mode to highest speed */
- fsl_sata_set_features(dev);
+ fsl_sata_set_features(sata);
+
#ifdef DEBUG
- fsl_sata_identify(dev, id);
ata_dump_id(id);
#endif
free((void *)id);
return 0;
}
+
+#if CONFIG_IS_ENABLED(BLK)
+static const struct blk_ops sata_fsl_blk_ops = {
+ .read = sata_read,
+ .write = sata_write,
+};
+
+U_BOOT_DRIVER(sata_fsl_driver) = {
+ .name = "sata_fsl_blk",
+ .id = UCLASS_BLK,
+ .ops = &sata_fsl_blk_ops,
+ .platdata_auto_alloc_size = sizeof(struct fsl_ata_priv),
+};
+
+static int fsl_ata_ofdata_to_platdata(struct udevice *dev)
+{
+ struct fsl_ata_priv *priv = dev_get_priv(dev);
+
+ priv->number = dev_read_u32_default(dev, "sata-number", -1);
+ priv->flag = dev_read_u32_default(dev, "sata-fpdma", -1);
+ priv->offset = dev_read_u32_default(dev, "sata-offset", -1);
+
+ priv->base = dev_read_addr(dev);
+ if (priv->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int fsl_ata_probe(struct udevice *dev)
+{
+ struct fsl_ata_priv *blk_priv, *priv;
+ struct udevice *blk;
+ char sata_name[10];
+ int nr_ports;
+ int ret;
+ int i;
+
+ priv = dev_get_priv(dev);
+ nr_ports = priv->number;
+ nr_ports = min(nr_ports, CONFIG_SYS_SATA_MAX_DEVICE);
+
+ for (i = 0; i < nr_ports; i++) {
+ snprintf(sata_name, sizeof(sata_name), "fsl_sata%d", i);
+ ret = blk_create_devicef(dev, "sata_fsl_blk", sata_name,
+ IF_TYPE_SATA, -1, 512, 0, &blk);
+ if (ret) {
+ debug("Can't create device\n");
+ return ret;
+ }
+
+ /* Init SATA port */
+ ret = init_sata(priv, i);
+ if (ret) {
+ debug("%s: Failed to init sata\n", __func__);
+ return ret;
+ }
+
+ blk_priv = dev_get_platdata(blk);
+ blk_priv->fsl_sata = priv->fsl_sata;
+ /* Scan SATA port */
+ ret = scan_sata(blk);
+ if (ret) {
+ debug("%s: Failed to scan bus\n", __func__);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int sata_fsl_scan(struct udevice *dev)
+{
+ /* Nothing to do here */
+
+ return 0;
+}
+
+struct ahci_ops sata_fsl_ahci_ops = {
+ .scan = sata_fsl_scan,
+};
+
+static const struct udevice_id fsl_ata_ids[] = {
+ { .compatible = "fsl,pq-sata-v2" },
+ { }
+};
+
+U_BOOT_DRIVER(fsl_ahci) = {
+ .name = "fsl_ahci",
+ .id = UCLASS_AHCI,
+ .of_match = fsl_ata_ids,
+ .ops = &sata_fsl_ahci_ops,
+ .ofdata_to_platdata = fsl_ata_ofdata_to_platdata,
+ .probe = fsl_ata_probe,
+ .priv_auto_alloc_size = sizeof(struct fsl_ata_priv),
+};
+#endif
diff --git a/drivers/ata/fsl_sata.h b/drivers/ata/fsl_sata.h
index a4ee83d..5b9daa7 100644
--- a/drivers/ata/fsl_sata.h
+++ b/drivers/ata/fsl_sata.h
@@ -1,7 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2007-2008 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu at freescale.com>
+ * Copyright 2019 NXP
+ * Author: Dave Liu <daveliu at freescale.com>
*/
#ifndef __FSL_SATA_H__
@@ -318,4 +319,14 @@ typedef struct fsl_sata {
#define READ_CMD 0
#define WRITE_CMD 1
+#if CONFIG_IS_ENABLED(BLK)
+struct fsl_ata_priv {
+ u32 base;
+ u32 flag;
+ u32 number;
+ u32 offset;
+ fsl_sata_t *fsl_sata;
+};
+#endif
+
#endif /* __FSL_SATA_H__ */
--
2.9.5
More information about the U-Boot
mailing list