[U-Boot] Pico-imx7d and imx7d sabre Break on 2020.01-rc3

[Fabio Estevam]

Hi Joris,

On Sun, Nov 24, 2019 at 5:06 PM Joris Offouga <offougajoris at gmail.com> wrote:
>
> Anatolij, Fabio
>
>
> I just compiled a fresh U-Boot with U-Boot master and It looks
> like commit f0b54d (video: mxsfb: Configure the clock after eLCDIF
> reset") [1]
> breaks my Pico-imx7d and imx7d-Sabre.
> see logs after:
>
> U-Boot 2020.01-rc3-00489-g47b48fe186 (Nov 24 2019 - 15:18:23 +0100)
>
> CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
> CPU:   Commercial temperature grade (0C to 95C) at 36C
> Reset cause: POR
> Model: Freescale i.MX7 SabreSD Board
> Board: i.MX7D SABRESD in secure mode
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> Video: 480x272x24
>
> After revert it  :
>
> U-Boot 2020.01-rc3-00490-g6bebc83c0a (Nov 24 2019 - 15:51:16 +0100)
>
> CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
> CPU:   Commercial temperature grade (0C to 95C) at 36C
> Reset cause: POR
> Model: Freescale i.MX7 SabreSD Board
> Board: i.MX7D SABRESD in secure mode
> DRAM:  1 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> Video: 480x272x24
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC0
> Hit any key to stop autoboot:  0
>
> So, can you consider this commit 'not applicable' for next release ?

Thanks. Let me send a revert.