[U-Boot] Pico-imx7d and imx7d sabre Break on 2020.01-rc3

[Joris Offouga]

Anatolij, Fabio


I just compiled a fresh U-Boot with U-Boot master and It looks
like commit f0b54d (video: mxsfb: Configure the clock after eLCDIF 
reset") [1]
breaks my Pico-imx7d and imx7d-Sabre.
see logs after:

U-Boot 2020.01-rc3-00489-g47b48fe186 (Nov 24 2019 - 15:18:23 +0100)

CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 36C
Reset cause: POR
Model: Freescale i.MX7 SabreSD Board
Board: i.MX7D SABRESD in secure mode
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
Video: 480x272x24

After revert it  :

U-Boot 2020.01-rc3-00490-g6bebc83c0a (Nov 24 2019 - 15:51:16 +0100)

CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 36C
Reset cause: POR
Model: Freescale i.MX7 SabreSD Board
Board: i.MX7D SABRESD in secure mode
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
Video: 480x272x24
In:    serial
Out:   serial
Err:   serial
Net:   FEC0
Hit any key to stop autoboot:  0

So, can you consider this commit 'not applicable' for next release ?

[1]- 
https://gitlab.denx.de/u-boot/u-boot/commit/ec3dcea7447031463643c33143b3a5f027f0b54d

Best Regards,

Joris