[U-Boot] [PATCH v5 0/2] Add board support for iMX8QXP AI_ML board

[Manivannan Sadhasivam]

Hi,

On Sun, Nov 03, 2019 at 04:29:49PM +0100, Stefano Babic wrote:
> On 21/10/19 13:00, Manivannan Sadhasivam wrote:
> > Hi,
> > 
> > On Thu, Aug 15, 2019 at 01:57:23PM +0530, Manivannan Sadhasivam wrote:
> >> Hello,
> >>
> >> This patchset adds initial board support for iMX8QXP AI_ML board
> >> from Einfochips. This board is one of the Consumer Edition and AI
> >> boards of the 96Boards family.
> >>
> >> This initial supports contains following peripherals which are tested and
> >> known to work:
> >>
> >> 1. Debug serial via UART2
> >> 2. SD card
> >> 3. Ethernet
> >>
> >> Below is the boot log from SPL to Linux kernel:
> >> ===============================================
> >>
> >> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> >> Loading Environment from MMC... *** Warning - bad CRC, using default environment
> >>
> >> In:    serial at 5a080000
> >> Out:   serial at 5a080000
> >> Err:   serial at 5a080000
> >> Net:   
> >> Warning: ethernet at 5b040000 (eth0) using random MAC address - d2:46:66:cf:f5:61
> >> eth0: ethernet at 5b040000
> >> Hit any key to stop autoboot:  0 
> >> switch to partitions #0, OK
> >> mmc1 is current device
> >> Scanning mmc 1:1...
> >> Found /extlinux/extlinux.conf
> >> Retrieving file: /extlinux/extlinux.conf
> >> 171 bytes read in 14 ms (11.7 KiB/s)
> >> 1:      ai_ml-kernel
> >> Retrieving file: /Image
> >> 24689152 bytes read in 1055 ms (22.3 MiB/s)
> >> append: earlycon console=ttyLP2,115200 rw root=/dev/mmcblk0p2 rootfstype=ext4 init=/sbin/t
> >> Retrieving file: /imx8qxp-ai_ml.dtb
> >> 12529 bytes read in 13 ms (940.4 KiB/s)
> >> ## Flattened Device Tree blob at 83000000
> >>    Booting using the fdt blob at 0x83000000
> >>    Using Device Tree in place at 0000000083000000, end 00000000830060f0
> >>
> >> Starting kernel ...
> >>
> >> [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042]
> >> [    0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani at Mani-XPS-13-9360) (gcc versi9
> >> [    0.000000] Machine model: Einfochips i.MX8QXP AI_ML
> >> [    0.000000] efi: Getting EFI parameters from FDT:
> >> [    0.000000] efi: UEFI not found.
> >> [    0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
> >> [    0.000000] earlycon: lpuart32 at MMIO 0x000000005a080000 (options '')
> >> [    0.000000] printk: bootconsole [lpuart32] enabled
> >>
> >> Thanks,
> >> Mani
> >>
> > 
> > Any update on this patchset?
> 
> Sorry for delay. Anyway, I have applied the patch, but due to changes in
> other subsystems (environment, etc.) it is not built clean. Could you
> rebase and resend ? Thanks
> 

So you want me to just resend the board support patch? (Saw that you applied
DT patch)

Thanks,
Mani

> Best regards,
> Stefano
> 
> > 
> > Thanks,
> > Mani
> > 
> >> Note: This patchset depends on the below cleanup patches submitted:
> >> [U-Boot,1/2] arm: imx8: factor out uart init code
> >> [U-Boot,2/2] arm: imx8: don't duplicate build_info()
> >>
> >> Changes in v5:
> >>
> >> * Incorporated review comments from Lukasz.
> >>
> >> Changes in v4:
> >>
> >> * Incorporated review comments from Fabio.
> >>
> >> Changes in v3:
> >>
> >> * Incorporated review comments from Fabio. Major change is switching to
> >>   distro_boot.
> >> * Added Reviewed-by tag from Peng Fan.
> >>
> >> Changes in v2:
> >>
> >> * Rebased the patches on top of following patches:
> >>   [U-Boot,1/2] arm: imx8: factor out uart init code
> >>   [U-Boot,2/2] arm: imx8: don't duplicate build_info()
> >>
> >> Manivannan Sadhasivam (2):
> >>   arm: dts: Add devicetree support for iMXQXP AI_ML board
> >>   board: Add support for iMX8QXP AI_ML board
> >>
> >>  arch/arm/dts/Makefile                         |   1 +
> >>  arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi    | 117 +++++++++++
> >>  arch/arm/dts/fsl-imx8qxp-ai_ml.dts            | 181 ++++++++++++++++++
> >>  arch/arm/mach-imx/imx8/Kconfig                |   6 +
> >>  board/einfochips/imx8qxp_ai_ml/Kconfig        |  21 ++
> >>  board/einfochips/imx8qxp_ai_ml/MAINTAINERS    |   6 +
> >>  board/einfochips/imx8qxp_ai_ml/Makefile       |   8 +
> >>  board/einfochips/imx8qxp_ai_ml/README         |  49 +++++
> >>  .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c  |  79 ++++++++
> >>  board/einfochips/imx8qxp_ai_ml/imximage.cfg   |  24 +++
> >>  board/einfochips/imx8qxp_ai_ml/spl.c          |  39 ++++
> >>  configs/imx8qxp_ai_ml_defconfig               |  83 ++++++++
> >>  include/configs/imx8qxp_ai_ml.h               |  95 +++++++++
> >>  13 files changed, 709 insertions(+)
> >>  create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml-u-boot.dtsi
> >>  create mode 100644 arch/arm/dts/fsl-imx8qxp-ai_ml.dts
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/README
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
> >>  create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
> >>  create mode 100644 configs/imx8qxp_ai_ml_defconfig
> >>  create mode 100644 include/configs/imx8qxp_ai_ml.h
> >>
> >> -- 
> >> 2.17.1
> >>
> 
> 
> -- 
> =====================================================================
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> =====================================================================