[U-Boot] [PATCH v2 4/5] board: ti: beagleboneai: add dts file

[Lokesh Vutla]

On 25/11/19 8:26 PM, Caleb Robey wrote:
> From: Jason Kridner <jdk at ti.com>
> 
> BeagleBoard.org BeagleBone AI is an open source hardware single
> board computer based on the Texas Instruments AM5729 SoC featuring
> dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital
> signal processor (DSP), quad-core embedded vision engine (EVE),
> Arm Cortex-M4 processors, dual programmable realtime unit
> industrial control subsystems and more. The board features 1GB
> DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash,
> 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion
> headers.
> 
> For more information, refer to:
> https://beaglebone.ai
> 
> The corresponding patch against the mainline linux kernel
> can be found at: https://patchwork.kernel.org/patch/11254903/
> 
> This patch introduces the BeagleBone AI device tree.
> 
> Note that the device use the "ti,tpd12s016" component which is
> software compatible with "ti,tpd12s015". Thus we only use the
> latter driver.
> 
> Due to small modifications in ocp, a tag was added to dra7.dtsi
> in the ocp component.
> 
> Signed-off-by: Jason Kridner <jdk at ti.com>
> Signed-off-by: Caleb Robey <c-robey at ti.com>
> Cc: Robert Nelson <robertcnelson at gmail.com>

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh