[U-Boot] [PATCH 7/8] net: phy: dp83867: refactor rgmii configuration
Grygorii Strashko
grygorii.strashko at ti.com
Mon Nov 18 21:04:46 UTC 2019
Refactor SGMII configuration to group all settings together and reduce
number of MDIO transactions.
Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
---
drivers/net/phy/dp83867.c | 75 +++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 39 deletions(-)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index f9bb925646..a43793cd42 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -62,9 +62,9 @@
/* PHY CTRL bits */
#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
+#define DP83867_PHYCR_FIFO_DEPTH_MASK GENMASK(15, 14)
#define DP83867_PHYCR_RESERVED_MASK BIT(11)
#define DP83867_MDI_CROSSOVER 5
-#define DP83867_MDI_CROSSOVER_AUTO 2
#define DP83867_MDI_CROSSOVER_MDIX 2
#define DP83867_PHYCTRL_SGMIIEN 0x0800
#define DP83867_PHYCTRL_RXFIFO_SHIFT 12
@@ -277,11 +277,11 @@ static int dp83867_config(struct phy_device *phydev)
}
if (phy_interface_is_rgmii(phydev)) {
- ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
- (DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) |
- (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
- if (ret)
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL);
+ if (val < 0)
goto err_out;
+ val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK;
+ val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT);
/* The code below checks if "port mirroring" N/A MODE4 has been
* enabled during power on bootstrap.
@@ -293,16 +293,39 @@ static int dp83867_config(struct phy_device *phydev)
* register's bit 11 (marked as RESERVED).
*/
- bs = phy_read_mmd(phydev, DP83867_DEVADDR,
- DP83867_STRAP_STS1);
- val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL);
- if (bs & DP83867_STRAP_STS1_RESERVED) {
+ bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1);
+ if (bs & DP83867_STRAP_STS1_RESERVED)
val &= ~DP83867_PHYCR_RESERVED_MASK;
- phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
- val);
- }
- } else if (phy_interface_is_sgmii(phydev)) {
+ ret = phy_write(phydev, MDIO_DEVAD_NONE,
+ MII_DP83867_PHYCTRL, val);
+
+ val = phy_read_mmd(phydev, DP83867_DEVADDR,
+ DP83867_RGMIICTL);
+
+ val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN |
+ DP83867_RGMII_RX_CLK_DELAY_EN);
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
+ DP83867_RGMII_RX_CLK_DELAY_EN);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ val |= DP83867_RGMII_TX_CLK_DELAY_EN;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ val |= DP83867_RGMII_RX_CLK_DELAY_EN;
+
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val);
+
+ delay = (dp83867->rx_id_delay |
+ (dp83867->tx_id_delay <<
+ DP83867_RGMII_TX_CLK_DELAY_SHIFT));
+
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_RGMIIDCTL, delay);
+ }
+
+ if (phy_interface_is_sgmii(phydev)) {
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
(BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
@@ -327,32 +350,6 @@ static int dp83867_config(struct phy_device *phydev)
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0);
}
- if (phy_interface_is_rgmii(phydev)) {
- val = phy_read_mmd(phydev, DP83867_DEVADDR,
- DP83867_RGMIICTL);
-
- val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN |
- DP83867_RGMII_RX_CLK_DELAY_EN);
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
- val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
- DP83867_RGMII_RX_CLK_DELAY_EN);
-
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
- val |= DP83867_RGMII_TX_CLK_DELAY_EN;
-
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
- val |= DP83867_RGMII_RX_CLK_DELAY_EN;
-
- phy_write_mmd(phydev, DP83867_DEVADDR,
- DP83867_RGMIICTL, val);
-
- delay = (dp83867->rx_id_delay |
- (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
-
- phy_write_mmd(phydev, DP83867_DEVADDR,
- DP83867_RGMIIDCTL, delay);
- }
-
if (dp83867->io_impedance >= 0) {
val = phy_read_mmd(phydev,
DP83867_DEVADDR,
--
2.17.1
More information about the U-Boot
mailing list