[U-Boot] [PATCH v2 2/5] board: ti: beagleboneai: add initial support
Caleb Robey
c-robey at ti.com
Mon Nov 25 14:56:47 UTC 2019
These are necessities for beaglebone ai boot.
Signed-off-by: Jason Kridner <jdk at ti.com>
Signed-off-by: Caleb Robey <c-robey at ti.com>
---
v2 Changes:
- board.c changes that were present in previous commits
were erroneously left out. Reintroduced for the
sake of configuring the bbai once it is detected.
arch/arm/mach-omap2/omap5/hw_data.c | 1 +
board/ti/am57xx/board.c | 24 +++++++++++++++++++++++-
include/configs/am57xx_evm.h | 1 -
3 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c
index c4a41db92a..fa4e27063c 100644
--- a/arch/arm/mach-omap2/omap5/hw_data.c
+++ b/arch/arm/mach-omap2/omap5/hw_data.c
@@ -418,6 +418,7 @@ void enable_basic_clocks(void)
(*prcm)->cm_l3init_hsmmc2_clkctrl,
(*prcm)->cm_l4per_gptimer2_clkctrl,
(*prcm)->cm_wkup_wdtimer2_clkctrl,
+ (*prcm)->cm_l4per_uart1_clkctrl,
(*prcm)->cm_l4per_uart3_clkctrl,
(*prcm)->cm_l4per_i2c1_clkctrl,
#ifdef CONFIG_DRIVER_TI_CPSW
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 5fca261657..7d98df575d 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -52,6 +52,7 @@ static int board_bootmode_has_emmc(void);
#define board_is_am574x_idk() board_ti_is("AM574IDK")
#define board_is_am572x_idk() board_ti_is("AM572IDK")
#define board_is_am571x_idk() board_ti_is("AM571IDK")
+#define board_is_bbai() board_ti_is("BBONE-AI")
#ifdef CONFIG_DRIVER_TI_CPSW
#include <cpsw.h>
@@ -101,12 +102,19 @@ static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
.is_ma_present = 0x1
};
+static const struct dmm_lisa_map_regs bbai_lisa_regs = {
+ .dmm_lisa_map_3 = 0x80640100,
+ .is_ma_present = 0x1
+};
+
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
{
if (board_is_am571x_idk())
*dmm_lisa_regs = &am571x_idk_lisa_regs;
else if (board_is_am574x_idk())
*dmm_lisa_regs = &am574x_idk_lisa_regs;
+ else if (board_is_bbai())
+ *dmm_lisa_regs = &bbai_lisa_regs;
else
*dmm_lisa_regs = &beagle_x15_lisa_regs;
}
@@ -551,6 +559,8 @@ void do_board_detect(void)
bname = "AM572x IDK";
else if (board_is_am571x_idk())
bname = "AM571x IDK";
+ else if (board_is_bbai())
+ bname = "BeagleBone AI";
if (bname)
snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
@@ -585,6 +595,8 @@ static void setup_board_eeprom_env(void)
name = "am572x_idk";
} else if (board_is_am571x_idk()) {
name = "am571x_idk";
+ } else if (board_is_bbai()) {
+ name = "am5729_beagleboneai";
} else {
printf("Unidentified board claims %s in eeprom header\n",
board_ti_get_name());
@@ -648,7 +660,7 @@ void am57x_idk_lcd_detect(void)
struct udevice *dev;
/* Only valid for IDKs */
- if (board_is_x15() || board_is_am572x_evm())
+ if (board_is_x15() || board_is_am572x_evm() || board_is_bbai())
return;
/* Only AM571x IDK has gpio control detect.. so check that */
@@ -746,6 +758,9 @@ int board_late_init(void)
/* Just probe the potentially supported cdce913 device */
uclass_get_device(UCLASS_CLK, 0, &dev);
+ if (board_is_bbai())
+ env_set("console", "ttyS0,115200n8");
+
#if !defined(CONFIG_SPL_BUILD)
board_ti_set_ethaddr(2);
#endif
@@ -793,6 +808,11 @@ void recalibrate_iodelay(void)
pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am571x_idk);
iod = iodelay_cfg_array_am571x_idk;
iod_sz = ARRAY_SIZE(iodelay_cfg_array_am571x_idk);
+ } else if (board_is_bbai()) {
+ pconf = core_padconf_array_essential_bbai;
+ pconf_sz = ARRAY_SIZE(core_padconf_array_essential_bbai);
+ iod = iodelay_cfg_array_bbai;
+ iod_sz = ARRAY_SIZE(iodelay_cfg_array_bbai);
} else {
/* Common for X15/GPEVM */
pconf = core_padconf_array_essential_x15;
@@ -1121,6 +1141,8 @@ int board_fit_config_name_match(const char *name)
return 0;
} else if (board_is_am571x_idk() && !strcmp(name, "am571x-idk")) {
return 0;
+ } else if (board_is_bbai() && !strcmp(name, "am5729-beagleboneai")) {
+ return 0;
}
return -1;
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index baeca5417d..f155581fa2 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -23,7 +23,6 @@
#define CONFIG_SYS_BOOTM_LEN SZ_64M
-#define CONSOLEDEV "ttyS2"
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
--
2.17.1
More information about the U-Boot
mailing list