[U-Boot] [PATCH v2 0/2] Add Broadcom XHCI driver for iproc platforms

[Vladimir Olovyannikov]

This patchset adds Broadcom XHCI driver for iproc platforms.
This USB controller is based on the Broadcom USB3 IP Core.
Supports USB2/3 functionality.

Bharat Kumar Reddy Gooty (2):
  dt-bindings: Documentation on BRCM xHCI controller
  drivers: usb: host: Add BRCM xHCI driver

 .../bindings/usb/brcm,generic-xhci.txt        |  12 ++
 drivers/usb/host/Kconfig                      |   8 ++
 drivers/usb/host/Makefile                     |   1 +
 drivers/usb/host/xhci-brcm.c                  | 105 ++++++++++++++++++
 4 files changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/brcm,generic-xhci.txt
 create mode 100644 drivers/usb/host/xhci-brcm.c

--
2.17.1